come on guys ... he need help on his casing ... not your comments ....
help him up la .... and stick to the topic



Battousai ..... i've done a few mods myself ... sorry to say ... i cant find any valid solution but to sand down the paint ... re-apply again ...


the paint bleeding is resulting by amatuer work by not applying primer to etch the paint to the surface .... and with heavy spraying + less layer

those methods are only used by mom who want to do everything fast


the damage is already done and cannot be recoverable ... you'll have to sand it down to the bare to remove the paint

reapply primer coat, color coat and if preferred a clear coat

if that guy happens to use primer ... just sand down to the primer ... and start there ... but most ppl dun use primer to cut cost, and cut the paint life


sorry to hear of your case, but i advise you to learn of spray painting ... it's a good experience to learn something .... just learn to press the nozzle and the timing ...... it's not hard

apply many coats ... but not thick ones ........ thin coats ...