do you think a good quality bad ass power cable will help increase PQ? just like and audio am, with good quality power cord, it do wonders? but is it possible to change to other power cord? cos my x10k have a funny clip on thing at the bag, not sure any 3rd party connector can fit into the plasma...

Tested supra power cable on my S10, no improvement at all for me.

Use good HDMI cable, sure improve PQ.

Of course it won't

use htkaki white snake kenot?

but for sure i know hdmi cable makes no difference

I wanna hear someone mention it does improve the image!

But 1 thing I know is make sure the cord is fully inserted to the Plasma TV....because, during installation or movable wall bracket, the AC cord does get loose somehow due to arrangement of it too tight. If the plug in not fully insert, sometimes you will hear buzz sound etc.

If still not satisfied and hand are itchy to add something, just add a Voltage stabilizer / Conditioner should be enough.

This post has been edited by azbro: Jul 14 2009, 03:22 PM

This is all very subjective. I like good power cable so I buy them. Don't really care if they improve anything or not.

Would like to get this for my LCD since whitesnake can't fit properly as the IEC is longer than standard cable.

i am sure for PC and power amp, power supplyis very important and power cord is part of the equation, can feel the difference immediately..

i dun mind getting a good one if it can fit into my x10k...

HDMI is HDMI... monster or not monster..

http://www.psaudio.com/ps/products/descrip...les-accessories


This post has been edited by C.T. Seong: Jul 15 2009, 11:36 AM

The funny clip thing can be removed, use a small flat screwdriver and pry it open. It's actually a normal IEC plug.

So if you replace to a new power cord, try to put the clip on it. If can't I'm not sure the IEC can hold, it may fall off.

too high tech...I dun think even Nasa use such stuff !!..

Anyway, I would be nice to get the best of everything....only my salary very low...so the standard one will do, as long as its fix properly and doesn't cause interference is good enough for me.

i am willing to spend RM80-RM120 for a good power cord...if RM300-RM 400 forget it, not worth it as i have minor color blindness...hahahaha

if a quality power cord can improve pic quality, then i wanna try it on my microwave oven.. maybe it will warm up food better and retain the moisture of my kaya pao when i reheat it

i have to ask then....wat diff does da power cord make for ppl to spend an extra 100 bucks on it?????

i understand if its spoilt n u need to replace it but otherwise????

surely got somekinda benefit rite?

supplied power cord should be sufficient bcoz any improvement in PQ is too minor to justify the price of a specialized power chord. Even though manufacturers and magazines reviews say otherwise, just remember the magazines depend on manufacturer advertisements for revenue so its a win-win situation for both of them. We the customer who will end up spending un necessary money..

Those people who spend extra on power chord are suffering from brain dysfunctional disease... they're desperate to improve their equipments until a point where they fork out few hundreds on a cable, and their brain tells them there are a difference - because money has spent, so there must be a difference.

means i wasted on my white snake??

i am no devotee to cables to...thats why asking got anyone see any difference..if got difference...80-120 is all i am ready to spend..

you farking loaded consider donate some money to charity nevermind la

i want to know too bro.. but like i said if u say it can improve contrast or black level of your tv then i might wanna try 1 on my microwave oven n see if it cooks better or use it for my hair dryer to see if it gives more volume or body to my hair:)

actually i used the power cord on my AVR and the improvement was on Audio.. I didn't check PQ.. didn't notice difference though

i love cables. maybe i need to go do mri...i might have a brain dysfunctional

wah so rich to use white snake on your Sammy LCD?

no la... use for AVR only

why don't you buy elite power line conditioners also.. that would make better impact..

wei... stop the poison pls....

your wallet is very thick.. why not..

Very thin d.. namo amitabha

Thick full of cc or cash?

all credit only

Lucky you, my celeri too low until credit card company doesn't approve my card application

Can you guys stop calling bad names? If you doesn't agree to something, just give your reason, this way that other person might learn something and in the end might even agree with you. No need to say others having brain disease, etc. Thanks.

haha! why you bought a expensive power cord?

---

Added on July 16, 2009, 12:28 pmcos you never gip them chance to earn interest from you mah.. so rich always pay full within 20days... no wonder la..



This post has been edited by ar188: Jul 16 2009, 12:28 PM

Nope, mine is very cheap one, check my sig for my equipment. I just don't understand why someone need to call other people bad names.

I had a white snake before, but sold it off.

This post has been edited by aiman04: Jul 16 2009, 12:34 PM

cos you never gip them chance to earn interest from you mah.. so rich always pay full within 20days... no wonder la..

[/quote]
agreed

rilek bro...some people like that wan. must be a fan of bon jovi

fluorescent lamps in lcd is very sensitive to power supply. plasma display works almost similar(in principal) to that of fluorescent lamps.

Conclusion, both plasma and lcd benefits from AVR. Especially to reduce flicker. Though the effect may seem minor.

Bringing back a very old question....

Anyone upgraded their display devices power cord, be it plasma, LCD, LED-LCD, projectors or CRT ?

As most centered the upgrade for Power Cord in audio related devices ie AVR, CD-player, BR-Player, Amplifiers or Subwoofer, just curious anyone actually make it upon their display devices and does it benefit from such?

As our "Home Entertainment" comprises of both Video(Display) and Audio(Sound) do it make sense that the upgrade only centralised upon the Audio Section while seem the Video Section seem neglected. Of course most would say, we start the upgratidis on the source component and improve along the chain, but the video chain seem neglected while priority seem to be given to the audio chain. So any views? Is Audio take precedent over Video?

I didn't know power cord can be replaced.. because my power cord looks like permanently attached to my lcd..

i think unless you are running a system that is in the tens of thousands of dollars... the benefits from higher end power cords will be too minimal...

This is what I have heard on Hi Fi and I am not offering explanation as to "why".

Different power cord do sometimes make the equipment sounded differently. I used the word "differently" and did not use the word "better".

To hear this differences, you have to plug it into higher end (read....expensive) equipments. Very unlikely to hear any different in low end equipment.

I believe some of us are running display devices (projectors, tv and such) that are of the expensive kind. Money are spent on better inter-connect, surge-protection and such, but do we leave the power cord out of this upgrade?
In the source and audio section, we upgrade the power cord along with the inter-connects but why we leave out that one link in the display devices?
As "some" of us do "hear" difference on audio, do the same "difference" can be obtained with power-cord upgrade on display devices? That is the question remains when upgraditis strike, do we upgrade "that" display power cord?

tried to use an upgraded power cord for my mid range system before....no difference ...but maybe i just don't have a good ear