since when i went to thailand like u all? sis sis sis
hahah.. yep..goes to u..
aiyo. kaya person.. CIIIF dont wan?

u tweak that chip 1st..and then tell us the max..so save my time to find the max of mine later. huhuhu..sucha lazy person i am

we must know ur limit well

poisoning take place pagi2 bute..

i wonder y ppl willing to go to other board like MSI gd70 that more expensive or any ahsus/giga that about 5++ rather then DFI? its

swap with ur dark knight..
huhuh..that board cant utilize ur TRUE... huuu

kayamen.kayamen..

some said here, the pwm heatsink of ta790gx a3 is not good..(is it ah khoo that mention is before)
so u mod with what to make it efficient? add some fan there? or take it off and replace with other heatsink?

owh ya.. i tot the "not good" is like the contact area not large, or not fit properly with the fets. if that is so, i dont mind using the stock..just add some fans there... it will be better then heatsinkless..

aiyo... GF rig at ur siggy..huhuh
have the bracket edi? went to LYP to change the board..sure u bought the bracket together (wait..LYP selling TRUE a? havent notice one)

hahaha.. dont repeat the mistake made...

so buzy a uncle.. later when the sweat paid off, im sure ull have 965BE + AM3 running hackintoch.. or go to APPLE straight away..perhaps

too bad even the not binatang series i dont find here.. just found the dual channel platinum one.. no triple channel..
i wonder what chip is that..seems like it just said MICRON only.. any D9XXX?

wah.. u all spam alot..'
this morning online, the last page is 3pages back.. once i reach selangor, open this thread, it takes me 15mins to read all the unread post..haish..
(the mobo will be posted at perlis.. now at sel..so still have no rig to play with..demn bored.)

This post has been edited by kuntawakaw: Jul 27 2009, 10:51 PM

the girl in ur wallpaper enough..no need those eye candy thing..huuu

u asking about AMD proc or INTEL proc boss? jk jk jk

selagor is my hometown.. uchi uchi...
i just went back for a week only.. no seseme babi at perlis.. UITM just want to standardize the cuti..so no mid term cuti for UITM..melaka campus fault la

@ah_khoo, how much the ram cost at SINGA?
im too itchy waiting for my kingmax ram.. if that ram good enough, will buy another one.. ordered 1 stick only..if not good, seek another ram la..huhuhu.. but must cheap

no la..not the bios crash..
the "no display" just after the windows loading screen. so its like my and XiuKeong prob.
need to swap the display port (for my prob) and hold F8 while boot> enable low resolution (for XiuKeong prob)

i wonder with that bios, his unlocking fail.. no sign of activity after "Auto" the ACC.. his batch is 0922cpmw.

right after flash bios, then set optimized default>save and exit>stuck... y a?

im the one that guiding him with the unlocking.. via YM and phone call.. so i know better then u..

he's using the mod bios dated 16/6 (since i saw the description there saying to unlock 3rd and 4th core)
i wonder the bios is perfect edi (or need to try the latest MOD bios?)... so now as ah_khoo said, have to put -2% at all cores? i asked him to let it at auto (just like mine and my fren's MSI c770 setting)
"Auto" setting, unlocking Phailed...

@twinkles, dont put the unlocking is ur main goal. even that batch have bad apples (taken from ah_khoo's mouth)

if bios crash, he cant able to boot at all after flash bios right? but now he able to do so few times..
so mebbe that bios have issue since mod bios, but im sure its not bios crash.

that bios is better? will ask him to do so later..im also in the process of learning the board..my board reach perlis edi...

i tot the Phenom likes those setting.. PhenomII donot like them.. since last time i also tried with my ta790gx 128, i set the ACC to All cores (foget how many percent) it cant boot at all.. and those ACC i found that it not helping the OC in PhenomII but in Phenom, it helps alot..


will give a try later.

now hes using the 29/6 bios..still cant unlock after -2%..i wonder..
it can unlock even at stock speed and setting? or need to lower something? (NB freq, or core speed?) or increase something ( vcore?)

u can unlock with all stock?

congrats..now go OC..hehe..
and not to put too high vcore on x4... hot hot hot.
for to 1st page for guides.. plenty of em there.

now blue edi..hehe
y not green? blue more to intel..green is AMD (wakakka..banyak komplen ini org)

just notice..my old JW 61s + x2 4000+ is running with extremely high vcore..its 1.41vcore..

so time to undervolt.. crap mobo cant OC..but can undervolt..huhuh

and twinkles.. i think u shud refer the to TMPIN2 for ur proc temp (correct me -pWs- and ah_khoo) since temp sensor is messed up after unlock.

just make sure dont exceed 55c to be safe..

bios is the issue but not crash as u said earlier

that low vcore.. im geting

and now i amused..
i set the multi at 11x
but it will revert to 10x if i increase the HTT
y a?
just too itchy to play..

so far the undervolt program goes well

its on DFI..we wan a newer board.. hehehe..
(u a pro..for sure can do that)

hahaha..
nvidia chipset.. 61s.. i wonder AOD can be used..

all made in bios.. demm.. even vcore that low, the temp is still above 40

the design is no for me.. like toys only.. no LED.hahah
but the speed + the CL is
i wonder what is the 2200+ means.. can go further more?
i hope performance ram will greatly decrease the price after another 6months.. can use my next PTPTN to buy.

@babyyi.. u gave up OC ur ram edi?
feeling like going bact to perlis la (my mobo and ram shud arrive edi)

u shud try to for the unlock "unlock multiplier"
haha.. who knows u have plenty of luck..

post ur SS here.. + the RAM tab also

u tried blend/large/small?

i just notice this.. even imma slowpoke..still wan to post..
this is not an autobot..
its decepticons



This post has been edited by kuntawakaw: Jul 29 2009, 12:48 AM

woot.. the VCORE..im shock.
hahha.. u undervolt that much ya..

1.040v.. that vcore is suitable for xixo only.. she's in green thing..saves electricity..
ur ram max speed been determined edi?

@ -pWs-
whatta..
that vcore able to make it x4 3.6..
u making me angry.

we demand for 4ghz.. (its a no go for my ta790gx 128)

cool and quiet shud reduce ur multi as well..so reduce the core speed as well. but from the CPUZ, only the vcore is reduced..so i wonder..

now just stress with small FTT..(or might consider bumping 1 notch of vcore,lower down HT perhaps)

@-pWs-
im waiting for ur SS..can post now? hehhe..10mins of priming also consider stable for me..
im too

no no..not 1.4v..pick 1.312v-1.35v..shud be ok
lower HT link.. not multi.
done prime with small FTT in PRIME?

gambatte ne.
3.6 x4 with that vcore is TOOOOOOOOOOO good edi..no need that emoticon.. u shud use this instead.

try using small..so it will less stress ur RAM..if that pass, means ur ram is the culprit..im not saying ur ram is not stable..just seek for which one (proc or ram) is not stable 1st..

some value ram can do that with no sweat..but i wonder how the tracendence perform..

@yvliew
at CPUZ, u have to times 2.. so 449x2 is 898mhz...
using AOD in OCing?
change mem divider to 400mhz 1st..

just like i tot bro..
the last clock i can ever obtain with low vcore is around 3.6-3.7..around 1.30v still can prime stable.. but want to make it 3.8ghz, lot of vcore needed.. haish.. (im in x2 somemore)
but still, i wan 4.0ghz!!