bro, klau ddr3 best, gtau laa... dah lame sgt pkai ram separuh ni...

Anyone using Phenom II 945 3.0 GHz ?

edited

This post has been edited by herbie: Sep 12 2009, 04:49 AM

Probably will do;

CPU-z
SPI
3DMark 2006

Of course will mandatory standardize the OS and the HDD...also the amount of software in the PC when OC.....

---

Added on September 12, 2009, 5:11 amI dun have 945 3.0Ghz but what I do have is Phenom II X4 3.5ghz.....

This post has been edited by antonio: Sep 12 2009, 05:11 AM

want to ask about my oc phenom2 temp.
i read temp using everest..there got 2 different temp read by everest.
which one temp i need to trust?
cpu temp under 100% load.
Temperatures
CPU 60 °C (136 °F)
CPU #1 / Core #1 51 °C (122 °F)
CPU #1 / Core #2 51 °C (122 °F)

spec can refer to my sign.

ayo...u got 2 cores..so u got 2 readings...that simple...
n ya...u need both..hehe

muahiann

CPU 60 °C (136 °F) <-------- temp read by mobo
CPU #1 / Core #1 51 °C (122 °F) < ----------temp read by CPU itself
CPU #1 / Core #2 51 °C (122 °F) <---------------same..it 2nd core.from cpu


and u dare to put 1.4vcore with apache cooler? and that vcore is not needed for 3.6ghz..i can get 3.6ghz with vcore lower then 1.3 and 1.392vcore can get 3.8ghz edi... (what batch eh.might differ then)

but the cpu temp more hotter then 2 core temp..
i'm afraid about the cpu temp..which one temp more accurate?

---

Added on September 12, 2009, 6:42 amso i need to trust cpu temp or core temp?..cos cpu more hotter than core..the reading looks pelik la..

i cant get lower vcore for 3.6ghz..got bsod after a minute prime..3.8ghz i put 1.45v also not enough got bsod..maybe my batch is different..need more vcore.

This post has been edited by muhiann: Sep 12 2009, 06:42 AM

normally i will stick to each core reading..

i stick to higher reading that is the mobo probe one... safer
awal bagun sis...


able to stable setting...
hmm.. what else need to be tighten
i just notice i havnt tried tRc yet.. i just agak2 saja last time..not the tightest

This post has been edited by kuntawakaw: Sep 12 2009, 07:04 AM

u d9kpt 2x1gb?

i thought d9kpt is 2gb module..

have tried 8-8-8-20-26 to push more?

sorry boss..cant fulfill that..
cl7 it will never more then ______ (argh...fogot the ram speed..but 283HTT x 1333divider)
but cl9 also will never boot at that speed..

once i try to boot with that setting, it will "cold boot"... 1600divider will stuck at 17XXmhz only..so that is the max speed i can ever boot with 1333divider

cl7 1800mhz stable is quite easy (prev few pages i did posted SS on it)
.. and beyond that i havent try the stable clock...

mine is 1x2gb module..kekekke.
single channel OC..

bro i got problem with my temps too

in HW monitor

i got 2 temperatures

TMPIN0
TMPIN1

0- is 45C
1- is 34C

which one is processor and NB? O.O my core is around 30C each

is this too high for 7850 @ 3.3

Basically there are two readings, one taken from the motherboard sensor which is measured through a sensor located below the CPU and one on the CPU itself...

Hence, the two types of reading you can see in program such as everest....

You otai maaaa.....not all chips can do like yours...

TMPIN 0 usually associates with the CPU and the TMPIN 1 would be the Northbridge (790gx chipsets)...Sometime there are also VRM sensors such as DFI boards....

got a few questions and i think you need to see my screenshot

1. Does HT Link affect the speed of my comp?
2. Which JEDEC in the CPUz is the current timing, mhz,and volt of my Ram?
3. DRAM Frequency usually stock is 400. now 508mhz ? i thought my ram is DDR2 800mhz? explain please..

thats it please all the sifu sifu come tolong

1. Malas jawab...because a lot of fahaman...but to be short and simple...No
2. The slowest and lowest settings...which allows PC to boot easily....
3. Which means your ram now running at 1016mhz instead of 800mhz...overclock tuuuuuuuuuuuuuu

im a noobl eh.. i started OC late april..only 6months la..

i guess the TMPIN temp reading differ between board model.. ntah la..

lol yeah yeah @.@ i OCed my ram.. thanks guys.. anyways 2.1v isit considered very high? but my rams are not hot though

thanks everybody for teaching and guiding me

my ram also 2.0-2.1v

so its actually safe la right?