in bios, disable show mem error message, voila... boot up as per normal... to be safe always test it w/ d build in memtest 1st.

could it be d chip not gettin enuf juice?

waa... besh nyer sis... adioh dari sape tu?

if i need to choose between gaygay & msi, i'll definitely go for gaygay... award bios rox...

DeFinItely need not to say if price is not a concern...

online submission can ah? me at negeri orang leh...

sometimes what we want & what we can afford are 2 diff things. i will take dfi @ anytime but my cfo says d other way round, so i'm biostar.

most will go for biostar as long as price is a concern, unless d case like d 790gx ddr2 boards where asus just rm35 higher than biostar. if a person is in his rite mind, d extra RM35 is definitely worthy cause asus always come w/ better build quality.

This post has been edited by ah_khoo: Sep 11 2009, 05:43 PM

actually i did disabled it.. if not disable it, 1609 is where the DQS pop out... so i guess that is the main reason i cant get it stable..

the vcore enough edi..did tried it before i start with my rams..
and also now i test large FTT only.. mainly on ram (if use blend, 6mins pass then fail..if large, 1min failed- better i take large)

hmm..later find out

then just settle w/ d one which can be prime stable after disable d show mem error loh... 8xxMHz @ 7-7-7-x still not enuf meh... like that me & bro otromen can throw our kvr into tong sampah/long kang ledi...

This post has been edited by ah_khoo: Sep 11 2009, 05:56 PM

before i tweak the advance timing xixo + 8tvt tot, i can get stable at 1.60vdimm 800mhz..
after tweak the advance timing, i cant get it stable...
after loosen the altered timing, cant get stable...
after make the timing auto cant get stable.. all been done with 1.63vdimm

aiya!!!im going to kill myself..

let them rest for awhile...while im dead trying ti finish my assgnment

actually what other setting that u put?

i adjusted the trfc..
and 2 other timing that i set at the lowest value (that is 7)

1st i make trfc 160ns.. failed..tried everything... failed..
then loosen.. 300ns... failed...


even revert back to auto will lead to same result..nahh.... my ram pening edi mebbe (bak kate xixo)
will take short break..and later will try figure it back...

haha bro super pi 1m 25.5 secs slow ah for x2?

actually it's a better practice to push cpu/ram only..
after getting the stable setup for the each of them later play with other things..
would appreciate to give all the setting details..

it could be caused by something else like nb freq or others that we not notice..
7cl @1600 is already tight.. certain freq convenience with certain timing.. some not even stable if we set it loose..

the best way push the ram first without involving others such as mobo n cpu..
let it at default and see how far the ram can go..

wait wait.. i dunno if this is the correct step.

this is what i just did.

i drop my multiplier and raise my FSB

then now my DRAM Freq is 470mhz previous was 440mhz

is this the way?

yup.. push as independent kunta.. that's what i mean.. test so many time on same component will make them acting weird.. same goes to cpu, eventhough u can confirmed it already stable.. the stable state will be different each boot, doesn't mean u pass it today.. tomorrow will be same..

by the way..

my 1100mhz hancus

the max ram can go.. (for now laa )



bandwidth result onli at DDR2-1060
[attachmentid=1191633]

This post has been edited by xixo_12: Sep 11 2009, 07:11 PM

1100mhz for hyperx is like asking a stock ex5 to do 180kmh man.

but i didnt put any high hope.. DDR2-1000 stable is my target.. above that is just benchies for fun

@hilmiangah
haha...totally agree on that..anyway my tracer can easily go to 1066...heheonly change multiplier then can liao..

hey guess wanna know what you think of this WC kit

Cooler Master Aquagate S1

When I think of that, I think of TRUE

haha meaning? lol sorry velli blur

that's tracer 1gb darling, different league..

Probably Comp will run with DDR3....And most probably if do, will focus on CPU score rather than 3D....

Extreme category (or Open some would call it) should be fun, but I scared newbies, if seasoned OCer I dun really mind...

But extreme in terms of cooling lar, not overvoltage via soldering...


normal I suppose or maybe can squeeze the extra juice to early 20's or even lower...

Meaning if I want to go for WC, I will customized....

The only WC kit i will use is for HTPC....complete silence....

This post has been edited by antonio: Sep 11 2009, 08:12 PM

haha what you think of ther performance of the aquagate s1?

Like I said before, I dun think....I must either know the spec or read from somewhere else....

And most places that I read says that it is ok if you have bought one, but you probably look for an air cooling heatsink with silent but efficient fan which can do better...