like this ? 
[attachmentid=1108016]

I dont know why..achieving 4Ghz stable on Phenom II X2 is so hard..
Even pumping into 1.5XVcore..
AAh..maybe chip limit edy..even though my bro's Gigabyte mobo can up volts up to 1.9..

biostar > kit_kit sellin @ RM355
asus + giga sure > RM500

go figures... 

list of batch can be found HERE
freeze for 1 sec & ok again could be i/o issue. but if it's not givin any instablilty shouldn't be a problem no? 

yup, d more power phase d merrier but it spells more $$$ as well. 

for more bout power phases u can read d slides here:

http://forums.vr-zone.com/ban-leong-virtua...est-survey.html

seems like asus is bashin giga "indirectly"... 
ah_khoo  59
kuntawakaw  56
ventrilocks  52
bobiac  50

gotta stop postin for today... 

k, i already got the price for asus M4A78T-E RM498 , the dealer told me biostar high end board easy to spoil not recommend me to get it..
the processor batch also see already it is batch from 0925APMW (AP or CP i forget already, but it 0925XPMW), which i check at the website u give there are still people fail, how u look at this? and they say gigabyte still the best board for unlocking..

Core Voltage = 1.344V
Core Speed = 3100.9 Mhz

Just now got Blue Screen Again.

k, i already got the price for asus M4A78T-E RM498 , the dealer told me biostar high end board easy to spoil not recommend me to get it..
the processor batch also see already it is batch from 0925APMW (AP or CP i forget already, but it 0925XPMW), which i check at the website u give there are still people fail, how u look at this? and they say gigabyte still the best board for unlocking..

Core Voltage = 1.344V
Core Speed = 3100.9 Mhz

Just now got Blue Screen Again.

hey bro...try to pump more core voltage...n wat ram u using?

---

Added on July 30, 2009, 12:36 am

hey bro..go for DFI ...xD
try to get on 0922 lo...cz 0922 batch more high chance to unlock...xD

CPU Vcore: 1.35 or 1.4v to eliminate all suspects
NB :1.3v
HT.1.3v
Ram: Depends on your ram...just put 2.0v, I havent heard of a DDR2 burned because 2.0v...
Ram Speed : Again depends on your ram...If it is a DDR800 then put there 400...or some bios would just show 800 straightaway..
NB Frequency : Drop to 1800Mhz
HT Frequency : Drop to 1.6Ghz

Off CnQ

Try again...

ur ram original is 1066 o 800?mind to show  the SPD tab on cpuz...try to push ur voltage to 1.4 for cpu..

ur ram original is 1066 o 800?mind to show  the SPD tab on cpuz...try to push ur voltage to 1.4 for cpu..

i think the prob is somewhere else since OCCT passed..
mebbe things not related to OC
and 1.4vcore for stock clock   
ppl here can get stable at 1.312v in AM3

the ram stock is 1333mhz CL7.. so that shud be running fine in stock

He aledi 'unlocked' the other 2 cores    hence the need for 'additional' power....

Set how many to get 1.4 ?



Thanks for willing to help me

AMD quad Propus to arrive in September !!!

AMD had some sort of an issue with Propus, which is basically a Deneb core with the L3 cache physically removed . This core was supposed to show up at some point in late Q1 or early Q2 but now, after months of delays they are getting ready to launch it in September.

Propus has an issue that it should have performance extremely close to Deneb and this will definitely be an issue for AMD. The good thing about it is that this might be one of the smallest quad cores around but with AMD's Quad core prices being as low as they are, there is not much space to make these CPU more affordable.

Source : Fudzilla!

i think the prob is somewhere else since OCCT passed..
mebbe things not related to OC
and 1.4vcore for stock clock   
ppl here can get stable at 1.312v in AM3

the ram stock is 1333mhz CL7.. so that shud be running fine in stock

wahhh...set VDram or VDimm to 1.5v and just see your rams fly....  

Set how many to get 1.4 ?



Thanks for willing to help me