That if u already at 8 want to go to 16...

but his problem is at 4x...and no matter what he does will always be at 4x...

I kena like that last week....

Like i told u on the statement above

banyak nye ram??? editing 10000 high res pics from 1Ds Mk3???

1.35v 3100Mhz X2 is 80-ish watts
1.4v 3100mhz X 4 is 140-ish watts
1.4v 3600mhz X 4 is 178-ish watts
1.5v 3600mhz X 4 is 198-ish watts
1.5v 4000mhz x 4 is 235-ish watts
1.6v 4000mhz x 4 is 269-ish watts

Rams

1.8v 800mhz is 30-ish watts
1.8v 1066mhz is 40-ish watts
2.0v 1066mhz is 50-ish watts
2.2v 1066mhz is 60-ish watts
2.2v 1200mhz is 70-ish watts

Mobo will draw around 30-ish watts up to 90-ish watts depending on how much gizmos it has...

So kira ler sendiri....

---

Added on August 23, 2009, 10:48 pmIf not GFX then ok...

If u use like 48 series then a bit pening lor....

Mobo+CPU+Rams cikai2 pun drawing more than 200watts if u O/C....

Standard usage ok

This post has been edited by antonio: Aug 23 2009, 10:57 PM

bestnye ram laju2 ....me can oni 600 jerk

Tu lar...think of changing mobo for DDR3 right now (but when look at wallet, so thin...)

I think we should MANDATORY a full O/C settings before asking questions...Like back in the old days of LYN OC United...This will ease the troubleshoot and easier to find which part is the culprit

Please follow this template (or if you have a better one, kindly put here also)

System Spec
CPU: AMD X2 550 BLack Edition
CPU Week/Stepping: 0406 DPOW
Motherboard: PC Partner 790FX
Ram: 2 x 4GB DDR GSkill PC10666 5-6-6-12
PSU: PC Power & Cooling 1500w
Cooler: Phase Change 300W

O/C Settings
Mobo Bios Revision:
CPU Multi : 15x
HTT / Bus Speed / HT Ref Clock(Mhz): 200
RAM Divider (Mhz): 1:2/3:4/5:4 or 667/800/1066/1333
CPU-NB Multi / Memory Controller Speed (Mhz): 1800/2000/2200/2400/2600/2800/3000
HT Multi / Hyper Transport Link (Mhz):1800/2000/2200/2400/2600/2800/3000

Ram Settings
Memory Config : Ganged or Unganged
CAS Latency (CL) : 5
RAS to CAS Delay (tRCD) : 5
RAS Precharge (tRP) : 5
Cycle Time (tRAS) : 12
Bank Cycle Time (tRC) : 18
Command Rate : 1T/2T

Voltage Settings
CPU : 1.4v
RAM : 2.2v
CPU-NB : 1.3v
HT : 1.3v
NB : 1.4v
SB :1.35v
VDDNB: 2.5v-2.8v

Other Settings
ACC/ Advance Clock Calibration : Per Core/ All Cores/ Auto/ Disable
*if enabled please state the %
Core 0:-2%
Core 1:-6%
Core 2:+8%
Core 3:+4%
CoolnQuiet: Off
C1E: Off

This post has been edited by antonio: Aug 24 2009, 10:21 AM

SS doesnt really tells the whole story...when instability occurs is better to have the complete data to rectify and making easier to look which part needs tweaking....

Because just simply saying "I have a X2 550 and 1066 ram but I cant get 4.2ghz stable, can someone help me?" would really boggles the mind....

really???

Lucky I'm on XP....

Ok, lets continue OC...

Priming 3399Mhz X4....Temp manyak panazzzz compared to X2... The same settings only X2 was max on 45c jerk

Nevermind lar...the price to pay for 2 'free' cores...hihihihihi

Ok...lets continue OC...as usually I'm going to sleep now...

So will leave priming condition

X4 3399Mhz...Temp is hotzz worrr...X2 at the same settings only 45c...

But nevermind lar...its the price to pay to have two 'free' cores...hehehhehehe

Ok...lets continue OC...as usually I'm going to sleep now...

So will leave priming condition

X4 3399Mhz...Temp is hotzz worrr...X2 at the same settings only 45c...

But nevermind lar...its the price to pay to have two 'free' cores...hehehhehehe

Ok...lets continue OC...as usually I'm going to sleep now...

So will leave priming condition

X4 3399Mhz...Temp is hotzz worrr...X2 at the same settings only 45c...

But nevermind lar...its the price to pay to have two 'free' cores...hehehhehehe



Aiyakkk.....P1 gile....someone call mod clear up...

This post has been edited by antonio: Aug 24 2009, 11:17 AM


Attached thumbnail(s)

Drop?? I should be pumping more

Uik?? Vcore CPU worrr...How come u pump Vcore memtest can stable???

Before you do what cyberloner had mentioned, please select only one kits please to avoid confusion...I see that your have two types of kits memory....

Please choose the best kit then start OC from scratch...

Kenot sleep, jusz b4 i want to go sleep just now, saje gatal2 enter the I7 X58 thread....

Looking at mem bandwidth and frequency made me unable to sleep....wahhhlaawweehhh 2000mhz ram and 21k bandwitdh...dammnnn

But i think normal HD will undoubtedly bottle neck unless I'm using those VelociRaptors or SSD....

Does anyone here thinks i should sell off my AMD rig and top up to get I7???

This post has been edited by antonio: Aug 24 2009, 02:37 PM

Ape lagik...TA790GX 128M lorr...hehehehehe

Tak pun Asus M4A78-E....

Doesn't fail because small FFT dictates small amount to none in terms usage of ram...or in other words, if you want to test CPU stability alone, run Prime at small FFTs....

If you want to test stability with ram, then choose the Blend option...

Update!!

ASUS M4A78-E New Bios

Shortly after announcing the 1204 (11/6/2009 version Asus had released another two bios for the M4A78-E which is the;

-1210 (26/6/2009) - Improve the system performance when use certain CPU. Support new CPUs. Please refer to our website at: http://support.asus.com/cpusupport/cpusupport.aspx
-1213 (10/7/2009) *this is the latest - Fix the issue that certain network card can not be detected on PCIE Slot.

But surprisingly there is another new one but cant be detected using Asus Update, but can be downloaded at http://www.asus.com/product.aspx?P_ID=Bz2b2aYdPioLbN04

-M4A78T-E BIOS 1703 - Improve ACC unleashing mode function.



I know by now, you might already spot the (T) which is actually a DDR3 version of AM3 flavor the M4A78T...But, when I loaded the bios in Asus Update, look again



So, to proceed or not?? Some 'experts' will say that flashing a Bios not intended for a particular board will probably end it up either to the RMA department or to your friends house to flash the EPROM to the correct Bios....But interestingly enough, some 'experts' also condone the use of a 3rd party modded bios, which isn't an official bios from the manufacturer

If I go missing, you guys can guess already where my mobo is





This post has been edited by antonio: Aug 25 2009, 04:12 AM

Nope, been bz since after the flash with this;

---

Added on August 25, 2009, 12:12 pmLarrr...ada chart rupanya...hihihi...didn;t noticed...

This post has been edited by antonio: Aug 25 2009, 12:14 PM

Bunuh diri lar....not really can do anything