Which casing do you like??? And Why???
Specifications
Case Type : Cube case
Material : SECC 0.6mm
Motherboards : Micro ATX
Chassis Dimensions :
Depth (without front panel) : 348mm / Depth (with front panel) : 380mm
Width : 295mm
Top half : 103mm
Lower half : 130mm
PSU limitation : PSU length of no longer than 140mm recommanded. (Preferrably no Smart Cable Management)
Drive Bays : 2 x 5.25" (External)
1 x 3.5" (External)
2 x HDD (Internal)
Expansion Slots :
4 Standard Slots
Connectors : 3-pin 3 wires fan required
I / O Ports : 4 x USB2.0 / Handphone / Mic
Space available for VGA card at lower deck:

Cooling System

Front lower deck Rear lower deck ( Optional )
Size: 1xTranslucent 120 mm fan Can install up to 2 x 80 mm fan
Speed (RPM): Speed: 1200 RPM Rear upper deck ( Optional )
Air Flow (CFM): Air Flow: 41.8 CFM (MAX) Can install up to 1x 80 mm fan
Noise (dBA): Noise: 23.25 dB(A)

We only to know which you like. And This are still only prototype. They bigger then a Shuttle PC. can feed a micro ATX Board.
Shuttle PC need Motherboard in 170MM x 170MM or smaller (only 1 PCI Slot)
This Prototype need Motherboard in 244MM x 244MM or smaller (three PCI Slot)

For us is now importent which design you like. The inside is at all Prototype the same. Only front different.

Thank you. The white one get now one plus.

---

Added on June 27, 2009, 12:03 pmOk we record this.Thank you.

This post has been edited by Danny44: Jun 27 2009, 12:03 PM

Yes is a survey that we find out which we should produce.

A poll is not so good. We like to have people comments and in POLL you can not write a comment.

The item with the most responce is getting produced.

We have add the poll for voting. We hope to get serious Votes.

---

Added on June 27, 2009, 7:38 pmAccording to your signature you have a crossair from Asus. But this motherboard is a full ATX and can not feed in. only Micro ATX or smaller.

ATX: 305 × 244 mm (12″ × 9,6″). can not feed
Mini-ATX: 284 × 208mm (11,2″ × 8,2″) can feed
Micro-ATX: 244 × 244 mm (9,6″ × 9,6″) can feed
Flex-ATX: 229 × 191 mm (9″ × 7,5″), can feed
Mini-ITX: 170 × 170 mm (6,7″ × 6,7″) can feed
Nano-ITX: 120 × 120 mm (4,7″ × 4,7″) can feed
Pico-ITX: 100 × 72mm (4″ × 2,8″) can feed
E-ATX-Format: 305 × 330 mm (12″ × 13″) can not feed

This post has been edited by Danny44: Jun 27 2009, 07:38 PM

According to your signature you have a crossair from Asus. But this motherboard is a full ATX and can not feed in. only Micro ATX or smaller.

ATX: 305 × 244 mm (12″ × 9,6″). can not feed
Mini-ATX: 284 × 208mm (11,2″ × 8,2″) can feed
Micro-ATX: 244 × 244 mm (9,6″ × 9,6″) can feed
Flex-ATX: 229 × 191 mm (9″ × 7,5″), can feed
Mini-ITX: 170 × 170 mm (6,7″ × 6,7″) can feed
Nano-ITX: 120 × 120 mm (4,7″ × 4,7″) can feed
Pico-ITX: 100 × 72mm (4″ × 2,8″) can feed
E-ATX-Format: 305 × 330 mm (12″ × 13″) can not feed

We want to produce one of these. So there is no manufactor yet.