lol, i can answer for ezrasang(cos he's my best fren )
the hole is actually right beside the psu!
u c the cables at the psu there
n the plaster is to hold the oxygen absorber pack in place
the USB cable for his Centurion 532 i think too thick n stiff to route tru hdd cage la...

So my dear scout has become the endangered casing species...
Haha... but between storm and haf model is less here, more there for different people.
I choose scout bcos of interior black and that was a week before cm690 pure black...
But how come no one knows about cm690 pure black eh before it pop up in the market?

Well everything is right except the USB cable part.
To be exact, I let the cable pass through BOTTOM of the so known as hdd cage
Any idea to improve that part? I spent the most time at that particular part

ezrasang
any pics behind the motherboard?
maybe can see how to fix by there

Aik, my bad, I didn't take a picture of it.
Maybe tomorrow after bling bling my PC
But 1 thing, those USB cables are from the top.

Then I lead those USB cables by passing by from front, since I'm not using any internal hardware for the 5.25" bay.
Hope you get the idea
Any suggestion?

i got a perfect idea actually
the problem is - can all ur reset, power etc and ur usb cable all go through the other side of the optical drive??
can go by the bottom at the HDD cage and pass the hole to the destination

Err, I don't really get what you meant by 'go through the other side of the optical drive'.
Erm, some of the cables there are short and some ngam ngam tight to reach d port for USB there, that's why you'll notice got few suddenly came out from middle, hahah

21degree only
i think the sensor got problem

LOL, super cold
must b sensor problem lor...

this is what i was talking about
i hope u understand

I got it, but I think it's not really good, b'coz the holes at the both sides kinda small.
What I did was, d cables go bottom of hdd cage den go out and up, pass through my int card reader on the left(front view) den go up and into the 5.25" bay then up again till the end.

i still dont understand what u said
btw those holes are big enough to let the cables to go through it, no sweat
i personally did that actually on my bro's chassis

@Koki
nvm, i go his hse do it for him
let the pro handle it~ kekeke

JK!!! me oso still nid learn a lot about cable management

This post has been edited by General_Nic: Jun 29 2009, 01:03 AM

Hmmm, maybe my cables that passing through bottom of hdd cage can pass through the side holes. What about those cables came out from middle? I think they are too short. Nvm, I'll give it another try later on. Thanks anyway Koki

@General_Nic:
Handle your own cacing 1st then only talk about mine

@ezrasang ,

So did it improf the air seculation???

This post has been edited by aBc!!: Jun 29 2009, 01:14 AM

lol, same here
everyone has different thoughts of its kind
aik, i sense the beauty of friendship here
haha, i still have much to lear la, ezrasang, one tip on cable management is take ur time and be patient.
it pays off a lot
and btw nic, i never saw ur casing interior before

ok ok, i'll handle my 'cacings' 1st
comments(& critics) plz~



actually i simply did the cable management cos wan use pc d
n i run out of cable ties

This post has been edited by General_Nic: Jun 29 2009, 01:20 AM

I've no idea, have not on my Desktop after I'm done with those cables
Will know later I guess?

@ezrasang ,

Lolz icic .



@General_Nic,

En that bad bro~ prity nice to me .

Comment from me, just an opinion of mine, UV those cables!!!!!!!!!