where do u get that bro? mind to share? cause im gonna service my car soon...

Hi ... anybody can advice where to balut leather sit for Gen.2 around Klang Valley with best design with value RM???

anybody knows where to install gen2 headrest for the rear seat?

1.3 doesnt come with headrest liao 

anyone here installed voltage stabiliser? any recommendations or just any VS also can?

     

below 30%
gile ke weh

30% below.. not below 30%

i can made your Gen2 Torque(novice always call it pick up) start from 2.8rpm because you might need torque to pull the horse power (low torque with high hp=die)
if you stop stepping the peddle and continue again,it will be hard to get back the torque(means rpm drop and hard to produce the horse power) because

Horsepower = torque X rpm / 5252rpm

Here's an interesting bit of trivia; below 5252 rpm any engine's torque number will always be higher than its horsepower number, and above 5252 rpm any engine's horsepower number will always be higher than its torque number. At 5252 rpm the horsepower and torque numbers will be exactly the same.

Horsepower is a unit of power.  It can be defined in many ways.  In its basic sense, it's defined as work done in a straight line as described above under "Power".  But when the work is not done in a straight line, it must be defined in a different way: torque.

so for city/high way driver you need torque to push up to highest Rpm to get the horse power on high rpm
"specialy the slow pick up Engine like Campro" yes i know this car is fast during high rpm that why u need the highest torque to shorter then time to reach high rpm for better performance specialy for time attack

i just talk the true if you really angry you can call me 012-2023765 i dont mind kenal scold

p/s:R3 exhuast system is OEM by fetta Manufactory (easy to explain they just use other people Product to sandblasting the R3 logo) yes you are using Marco exhuast system,if you are using fullset R3 system

the best exhuast setup Price is Rm630 fullset half price of r3 promotion,also i can make sure your torque force will start From 2.5k rpm or 2.8k rpm
more faster then any other Campro engine open on 3.5k rpm( i means only exhuast mod)

This is my customer comment :
http://www.zerotohundred.com/newforums/eng...tml#post3843804

ooo got nouvo
padan la forgot to isi angin hahahahaha

sigh.. jus kena accident. bumper and bonnet dented, headlamps cracked.   

anyone letting go your stock bumper / bonnet / headlamps?

hehe. of course i dont fill in 50litres. what i meant was the tank's capacity is 50 litres. Usually i'll fill in RM60 petrol  when its reaching near to 'E' then i'll get a full tank already. How much did u spend in total for all that mod?

Anyone has any idea where I can get this hose? stock hose is also okay.. reason, wanna change back to drop in.
[attachmentid=1359845]

argh..salah tukar minyak itam..fc naik la plak..

i got a bottle from a fren working in t*yota ss. t*yota fully syn 5w40 engine oil, same like syntium 3000 i'm used to use for my car lah. but this t*yota engine oil very diff mah..engine berat, need the pedal more, fc creeping up slowly. bosan! bosan! even cheap castrol magnatec gives better engine response n long life.

who got extra x1r??