General Notes:
1. All XIGMATEK User are welcome to discuss, share and post their Xigmatek hardware here, better to have pictures and some review or comments
2. Spammer, trolls and non informative post please refrain yourself from posting to keep this post clean especially "BUMP" post
3. This one NOT a selling post, so any price survey please refer to Garage Sales section
4. List of user coming soon, for you to entitle to be listed, please post some picture by replying this post


ABOUT XIGMATEK : Reference ~ http://www.xigmatek.com/about_xigmatek.php

XIGMATEK Co., Ltd. was established in 2005 with the aim of becoming one of the world leaders in the computer Peripheral field. In XIGMATEK, the major members of management have many years experience in Computer Peripherals, Thermal industry, manufacturing and other applications.

Pursued an aggressive growth strategy, XIGMATEK invests heavily in R&D, has strategic alliances with suppliers and academia, builds up an integrated presence in major economic regions, and hones one of the world’s most efficient manufacturing operations.

A team of over twenty R&D engineers, product designers and technical people (one main team in German), XIGMATEK is full with confidence to offer excellent quality products and service to meet your needs.

Regards as the consumer market, as well as distributing electrical appliances through the usual channels, XIGMATEK will continue to develop new sales channels to cater to ever-changing consumer trends and demand.

With our fruitful experience, we have full confidence that we can provide not only the best, reliable, environmental and performing Computer Peripheral products but excellent service also to fulfill global user’s demand.

XIGMATEK Philosophy

I.C.E (I = Impressive # C = Creative # E = Essential)

IMPRESSIVE ~ Xigmatek holds its belief to be an “impressive” products provider. How long do you not obtain an impressive product and be touched in mind? Xigmatek learns the technical and experience not only in this Thermal industry, but other industry also to provide the impressive products to customers.

CREATIVE ~ Xigmatek always remind himself of that no creative, no power to this company. Regards as this, there is a team of over twenty R&D engineers, product designers and technical people. (One main team in German)

ESSENTIAL ~ Xigmatek believes himself firmly to be a much more “Essential” company. We know the importance of product essence, not only the excellent quality but also good performance, in time service and better durance.







Featured Products:

Cooling (CPU Cooler, VGA Cooler, HDD Cooler, Memory Cooler, Chipset, Notepad & Case Fans)

Computer CASING

Power Supply (NRP-PC , HC, MC Series)

Accessories (Thermal Paste, HDD Docking, Mounting Kit, Mousepad & Anti-Vibration Rubber

This post has been edited by lingloong: Jun 27 2012, 01:55 AM

New Arrival Products Which Available In Malaysia




http://www.xigmatek.com/product.php?productid=124



http://www.xigmatek.com/product.php?productid=162



http://www.xigmatek.com/product.php?productid=134



http://www.xigmatek.com/product.php?productid=172



http://www.xigmatek.com/product.php?productid=158



http://www.xigmatek.com/product.php?productid=165



http://www.xigmatek.com/product.php?productid=155



http://www.xigmatek.com/product.php?productid=154






This post has been edited by lingloong: Jun 27 2012, 01:47 AM

http://www.xigmatek.com/product.php?productid=147



http://www.xigmatek.com/product.php?productid=148



http://www.xigmatek.com/product.php?productid=149



http://www.xigmatek.com/product.php?productid=151

This post has been edited by lingloong: Jun 27 2012, 01:51 AM

Updating

This post has been edited by lingloong: Jun 27 2012, 01:51 AM

Reserved

This post has been edited by lingloong: Jun 19 2009, 02:11 PM

Reserved

This post has been edited by lingloong: Jun 19 2009, 02:12 PM

Reserved

This post has been edited by lingloong: Jun 19 2009, 02:12 PM

Reserved

This post has been edited by lingloong: Jun 19 2009, 02:10 PM

Good job bro lingloong! Finally got a didicated thread for Xigmatek! RS user reporting. Upload the picture tonight.

DK user reporting in.


Attached image(s)

Dark Knight S1283 reporting in...
Plus a lot of XLF-F1254 fans in HAF922...
Great product...


Picture coming soon...

This post has been edited by shawnlut: Jun 19 2009, 04:48 PM

Hi Bro If you can include some pic will be great
Between XiuKeong ur pic kinda dark Maybe ur "Knight" too shy and hid in the dark?

This post has been edited by lingloong: Jun 19 2009, 04:40 PM

RS user reporting in.... imo, RS is one of the best product of xigmatek. DK, its nice but performance wise still loses to alot of cooler. using nikel on DK its a bad move but the fan and colour matching is drooling. and thor is a lil overated. expensive yet doesnt perform to its standard.

no offense to those DK and thor user

RS n some Xigmatek case fan here. bought from TS himself

sry, only got purchased pic. no inside my com pic. too messy to show

Ya Bro, but with the price/performance you pay still DK is in acceptable. For the THOR, the so called version (ver1) come back with not very good review, but news coming in from supplier, XIGMATEK are coming out with version 2, a better designed THOR to maximize it's performance. We shall wait and see, coming soon!

---

Added on June 19, 2009, 5:17 pm Not yet "pasang" ke Bro? See how the RS performing

This post has been edited by lingloong: Jun 19 2009, 05:54 PM

RS user here.. the fan is getting changed at the moment..beh tahan the white led

Image is up! Satisfied with RS performance. Cheap yet powderful! Change stock fan to CM 90CFM for maximized the powah of the cooler!

1. My RS on GGB-UD3R (but now mobo been RMA)


2. Current P5Q-PRO pair with RS


This post has been edited by fylon: Jun 19 2009, 05:48 PM

Haik Bro your CPU cooler is Hybrid version (Xigmatek + Coolermaster) Not 100% Xigmatek due to change the Fan edi
I'll upload my RS in Armor+ MX picta tonight

This post has been edited by lingloong: Jun 19 2009, 05:55 PM

Haha.. Due the stock fault has low CFM, so i gotta change to 90CFM in order to get better result. But the core still Xigmatek! Its rocks! Awaiting for ur pic man!

Xigmatek product seller here can I join too ar boss

XLF-1453 user reporting

huhu xigmatek redscorpion reporting in!!

This post has been edited by Terence573: Jun 19 2009, 09:12 PM

I have just received the Xigmatek Battleaxe from you.

I will upload the photos later when I have fit it into my Zotac Geforce 8800GT.

Speedy delivery, got it this afternoon.

I'm current user of the 1st version of S1283... forgot the actual model name

Cause no good lighting there

may i ask,
can the battle axe fit on ati 4770??
just love xigmatek designs.. but hvt had the chance to own one..

Xigmatek Archilles s1284c and crossbow kit ACK-17753 user reportin

Here are some photos of the Xigmatek Battle Axe that I purchased from Ling Loong this week:

1. Xigmatek Battle Axe box


2. Xigmatek Battle Axe cooler by itself


I will be replacing my Zotac Geforce 8800GT cooler with this.

I believe that this will be able to cool the card better than the Zalman Cu900 Fatality version.

Red Scorpion user, reporting in......

all i can say, its the best bang of the buck cooler i ever purchased...

the performance is pretty decent...

My proc temp are around 44-46 when i put the PC inside my small hostel room(single room, but size like a storage room) but put in an aircond room, the temp reduced to 35-38 degree...love this cooler hehe

can the battle axe support HD4890?? reference board

Yup can support HD4890 with new "leg" included But have to careful not to void the new card warranty upon applying the Battle AXE

Between here is my RS in Armor+ MX Silver Will be uploading new pics for XIGMATEK PSU Soon

how is the performance?? better den accelero twin turbo??

This post has been edited by ooiwbng: Jun 20 2009, 01:29 AM

For ATI HD4770, anybody tried yet? Due to this card is still new in market, I'll consult with XIGMATEK supplier weather can fit or not. But FYI this cooler can fit any new card in market from Nvidia 7000, 8000, 9000 series and GTX200 plus ATI HD3000 and HD4000 series as HD4890, HD4870 and HD4850 tested positive

---

Added on June 20, 2009, 1:32 amBattle AXE it's Accelero Twin Turbo true competitor. Both using H.D.T technology, so almost the same lor except the look and design. Maybe some review or comments from both user will help

This post has been edited by lingloong: Jun 20 2009, 01:32 AM

More pictures coming...

xigmatek HDT S1283 user here sir! imba cooler~~

Thor Hammer user reporting in

Early this morning, I managed to replace the GPU cooler for my old Zotac Geforce 8800GT.

The old Zalman Fatality GPU Cooler (Reserved)

1. The GPU cooler itself


2. Before replacing the GPU cooler


The entire ordeal took around 45 mins to an hour. This is because the instructions were quite small (with multiple languages). It was quite intuitive for me as I have done this every now and then.

1. Xigmatek Battle Axe with my Zotac Geforce 8800GT (overview shoot)


2. Xigmatek Battle Axe with my Zotac Geforce 8800GT (side shoot)


3. Xigmatek Battle Axe with my Zotac Geforce 8800GT in my old PC

*As you can see, it takes around 2.5 slots or more.

The difference of the idle temperature between the Zalman cooler and Xigmatek cooler was around 6-8c (with both running at full speed).

Xigmatek cooler @ full speed is a lot quieter than Zalman cooler @ full speed.

Previously with Zalman cooler, it was around =56-60c

Now with Xigmatek cooler = 50-52c

Please not that this was tested in a room without air conditioning, will update results when the aircon is switch on later.

I would not be able to test the load temperature as my old PC has no games in it at all.

Pros:
1. Silent (even at fullspeed)
2. Fans can be replaced if needed be.
3. Quite easy to fit in
4. Wide compatibility
5. Good availability

Cons:
1. Takes up more than 2 slots
2. Instructions not as clear as the Zalman counterpart

I would recommend this to anyone who are quite annoyed with the heat and noise generated from their stock coolers.

This post has been edited by kianweic: Jun 21 2009, 08:25 AM

Plain jane S1283 user here, plan to get the crossbow soon(any idea on pricing?)

pm lingloong for price

8pcs xigmatek running in my cosmos black
cheers

Wah, 8pcs total! Kasi picta picta Lai Lai show off ur 8x in COSMOS

---

Added on June 20, 2009, 5:19 pmThanks for the info Bro So how bout ur GPU weight after you put on the BATTLE AXE? Hopefully this can help for other who opt 3rd party cooler for GPU to decide which one they should go for

This post has been edited by lingloong: Jun 20 2009, 05:20 PM

6 x XLF-F1254 fan
Top x2
Bottom x1
Rear x1
Front x1
DK x1

[ Another pc with 8 x XLF-F1254 fan - pictures coming soon ]

This post has been edited by shawnlut: Jun 20 2009, 05:27 PM

It is heavier by around 300g to 500g I think as I didn't weigh after....too excited to insert into the casing.

Anyway, my dad's PC was as heavy as it could get.

This is a good product and also a very affordable one for those who owns a Geforce 8800GT or GTX2xx (untested).

I won't mind getting this for my next Geforce GTX285 (that is after I change the entire casing, the current one does not have enough clearing to support another Geforce GTX285 with Xigmatek BattleAxe.

The Zalman Fatality GPU cooler sold.

This post has been edited by kianweic: Jun 23 2009, 08:41 AM

I've 10 units of XLF-1253 and they look very nice
just the air flow a bit weak but no matter how, i can sacrifice some air just to get a stylist look inside my casing

i help my fren build a rig. using Thor's Hammer pair with E8400, i clocked it at 9x450=4050mhz 1.26vcore. when i use linx to test the system stability. cpu temperature went up to 87c (non-aircon room). i double checked the cooler , installed correctly. but when stress with linx , i touch the heat pipe of thor hammer, didnt feel hot at all,but when stop stressing ,after 30 second went back to 40c, is this consider normal?

Mind if im join hohoo

damm cool.. after dis will upload my archiles pic..

This post has been edited by nabilfareez: Jun 22 2009, 02:45 AM

3 of 10 fans is it mine?

You sure the heatsink got touches the proc?

@Shawn koko
Wah,that day u mms me the pic not so clear,today i see liao going to sell all my orange blade one and change to 1254.

@Xiukeong
yup,three of them is urs one

3pcs and counting!

ya i sure,i lock the 4 screw tight already. how about u all hdt heatsink user or any thor's hammer user, heat pipe got feeling heat when stressing pc?

Tested Xigmatek BattleAxe when air-condition is on.

Idle: 46c

the default low temps of my 9150e and the achilles that i got from lingloong seem to keep my temps around 28-29 on idle

one thing to note though, for anyone planning to get a Cooler Master casing with side window. the acrylic i just a little too thick to close the panel properly, and the fittings are a bit brittle, so need to be careful when taking it out however, if you're buying an nvidia version casing, the acrylic thickness is just nice

s1283 vanilla user here

any thor hammer user here beside me?

Volt as user found. what is your idle and max load?

This post has been edited by piumiu: Jun 22 2009, 09:03 PM

hey, i got some question about thor's hammer, are u feel heat at your heat pipe when stressing pc?
i hlp my fren build a rig , pair thor's hammer with e8400 clocked at 4050mhz 1.26v(bios set), idle temp 38c to 40c, OCCT 69c max, linx went up to 88c
can u please share your experience with me? thank you

p/s:Thor's hammer with 2 cooler master "90cfm" 120mm fan

This post has been edited by nncl: Jun 22 2009, 10:37 PM

LinX went up to 88c with thor hammer summore with 2 fans?

my e8400 4.1ghz 1.35v LinX oni max 73c,archilles s1284

idle temp almost same,38 - 40c

This post has been edited by ZeneticX: Jun 23 2009, 12:26 AM

Yo how did u tighten the fan on Thor Hammer? BTW have a look on my rig to tell me did I place it the correct way, thanks.
It's really a pain in the *** to fix that thing, me and my friend were kinda noob but luckily managed to fix it.


Attached thumbnail(s)

@piumiu
While running at 3.7ghz, my processor (intel Q9550) is idle at 43c and load at 70c. quite ok for a casing without a good airflow haha

@nncl
Bro, i think theres something wrong cos last time my e8400 (at 4ghz) only reach 35c at idle and 63c during load while using cm hyper 212. Better check ur cooler back, u might not setted the cooler properly

@Gray Fox [X]
Usually i just attach the cooler and the fan first onto the motherboard. after that i just screw the mobo with the cooler attach on it inside the casing. to much work if i attach the cooler /fan later
Anyway, theres nothing wrong with the way u place ur cooler. the reason i place mine like that because my top fan can draw out the hot air better then my 8cm exhaust fan + i can cool down my graphic to

This post has been edited by Volt: Jun 23 2009, 07:35 AM

@Gray Fox.
wow a BTX casing..i presume a Dell casing? btw u shld turn the fans to << and >> bcoz if ur fan is pushing air towards your GC, it'll be hotter. btw the bottom casing issit a 922 or a 932 coz it looks like a 932 to me

red scorpion owner reporting in

vanilla s1283 user reporting

Mind explain "vanilla S1283" ?
Please snap some pic for us to share share

This post has been edited by lingloong: Jun 23 2009, 12:26 PM

another Achilles owner reportin in...

i mean the 1st version non-led fan s1283
my phone's camera spoil, so cannot take pic

ya , that's why i feel so weird.bro , your heat pipe got feel heat when stressing your pc ? nobody answer me this question
xigmatek flagship model get this kind of result . now feel lucky didnt buy 1 more unit for myself

and something i search from web about thor's hammer

---

Added on June 23, 2009, 2:12 pmthis week go friend's home check ,if like this can RMA?


This post has been edited by nncl: Jun 23 2009, 02:12 PM

hi all..rs user here.

very2 pleased with this cooler except that i can only mount it vertically instead of horizontally on my am2 mobo.

i think i can get better temps if mount it horizontally.

any custom made clips/bolt thru kit out there that i can buy.

thanx!

Hi Bro. I got ask my supplier regarding this problem, he said the earliest manufactured THOR got problem at the base heatsink, we call this version as VER1. So basically all THOR in Msia market now is VER1 with plenty of defective design especially the heatsink surface not "flat". They will exchange their remaining stock with VER2 (Revised version) for this THOR, now waiting the next XIGMATEK shipment from oversea. I also got ask him weather can get free exchange for the THOR for my previous customer and he also have to depend on XIGMATEK weather they accept this condition or not.

And update I will let you guys know. But for your solution, I propose you try to lapped the surface after watching the youtube video provided

That is not my heat sink,i no dare to lap the surface . If the thor's hammer is really same problem with that youtube video i provided can i exchange to ver2? i bought from cycom

Yes. I do feel the heat when stressing the pc.
I dont even have to open the casing as my fan is pushing the heat to the top haf 932 fan.
Just put my hand on the top casing and I can feel it.

I was using killerwhale with my old e8400 and the idle is 30c and load not more then 50c.
I am also using 2 90cfm fan and idle is only for 38c and load 55c with prime running. non aircond.
only using the thermal paste supplied.

Best is to see the base is flat and try resetting it. Did you apply too much thermal paste?
Also note that sockeet 775 base only cover 2 1/2 pipes for this cooler.

Hmm I'm using a HAF932, the back is to release the heat off so I was thinking to place it that way. Can try at the top but don't know whether top suck in air or blow out, must go check.

Ermm I though my fan is kinda facing >>> sucking air this side <<<, it's a 932 not Dell XD

Hmm can change I also want to change, don't really feel the effectiveness yet since I didn't turn on for a long time.

thx for answering me! since the temperature so big different with you i think probably bought a non "flat" surface version thor's hammer
and thor's hammer come with thermal paste?

I was considering to use Xigmatek Dark Knight for my processor early this year.

Due to the fact that nobody carried that during that time, I bought a 2nd hand TRUE120 instead.

Now I am a bit tempted to get Cool IT self-contained watercooling system though.

Yeap with 1 thermal paste, at first I though it was glue, noobie me LOL XD

can you take a pic and show me? cause i bought that one didnt included then i buy a TX-2 to applied

This post has been edited by nncl: Jun 23 2009, 04:54 PM

No sweat Bro, Tuniq TX-2 is still the best thermal paste in current market, you have pick a great thermal paste

The THOR should have included 2g thermal paste for once or twice application, you should consult with your seller

This post has been edited by lingloong: Jun 23 2009, 05:04 PM

Just open the ehatsink and check it.
Yes. It does come with a thermal paste.

I already applied on my thor hammer and threw the tube away. It should have it men, check properly.

anybody here attempted to mount a second fan to archilles?come share a pic

Bro..SD964 can join bo?


Attached thumbnail(s)

xigmatek red scorpion got come with Thermal paste anot?

No problem, SD964 also XIGMATEK family Come come Will come out with the list soon ya

---

Added on June 23, 2009, 8:04 pmYup, Red Scorpion come with one time application thermal paste

This post has been edited by lingloong: Jun 23 2009, 08:04 PM

thx for the reply. good luck in your sales =D

achilles user reporting in.

@Kabu

Yo bro.. U using push pin? Or SS kit? Btw, why ur achilles is facing up? Don't the psu is blocking the air flow?

The fans look really nice for Xigmatek, are they better than Cooler Master's ones?

well they last longer but the airflow not as good

@fylon
the psu fan is underneath there. so just nice. hot air should go up la. i know my casing unlike cm690. no roof exhaust(really wish to grab 1).

using push pin atm. seems not bending etc(using low profile small mobo ). maybe will get crossbow but not that soon.

This post has been edited by kabukiawie: Jun 24 2009, 09:33 AM

If ur need aiming to unleash maximum power of the xigmatek cooler (RS for my case) the stock fan is aint enough as the air flow isnt high enough. Get a CM 90CFM (planning to mod my RS for push-pull method when I'm free) and I'm sure u will satisfy with it.

---

Added on June 24, 2009, 9:21 am@Kabu

Ic. Thought u had invest for a SS kit. That would be better as can take off the cooler in few mins time. Push pin is a headache. Not like CM690? Indirectly "shoot tiok" other CM690 user liao.. Hahah! Anyways, what is ur temp reading?

My quaddy OC to 3.2Ghz, idle 40-45'c (depend on ambient temp / weather) full load never exceed 70'c. Run prime95 for 6hrs for get that reading.

Now running on stock mode, idle 39-40'c for core 1, core 2-4 are always under 40'c. Usually 36-38'c.

This post has been edited by fylon: Jun 24 2009, 09:21 AM