Greetings all LYN members,including to the "otai-otai" in case modding .The title says it all..just finished my modding today.

The case i use is COOLER MASTER CENTURION 5.

I've been thinking to mod this case because want to give my new & shiny mobo a new house...

right now i'm using ACER ASPIRE M1110 <-tak ingat model...it's amd...athlon X2 4000+ damn cannot overclock it...buy a new mobo,giv it a new & bigger house,do some port & polishing (????!!!) ...walaaa

So enjoy the pics below & let me know what do u guys think about it

BTW,my dad buy this case for his pentium 3 pc since he buy a new pc,not using it...

Tool i've used :
-Hammer (use to remove the rivet with nails kes tak sabar2 mau modding)
-Screw driver
-jigsaw (company punya,also potong the "see through" window kat sana)

To make this blinged & shiny case i've use:
-Anchor #30 black spray
-Anchor **55 orange fluorescent spray
-Anchor #1 clear spray
-sand paper (3 type i used,the "kasar" one i forget,then grade 1000,finishing grade 2000 to smooth it

The tingkap a.k.a acrylic i "curik" at my tempat kerja...
also the u channel




Removed the ancient things..





Togel Mode 18sx



First layer applied to the "rangka"



See Through window...cutted by a pro's at my office...credit to abang hassan can't upload the pics he's working on it because the pics at my friend's phone



Re-assambling

Front Panel



Top,wiring & fans



The Result







The next thing is place a new setup into this pimp'd case...i want to call it VOLTRON mod...

•••**NEW STICKER & NEW SYSTEM**•••



This post has been edited by ikhwan666: Jun 21 2009, 12:44 AM


Attached thumbnail(s)

thanks man

hmm....just spray layer after layer,then apply the clear...or maybe i sprayed the clear a little closer,or in bm sembur dekat2..but must be extra careful not to spray too much...hmmm...maybe i can polish this new baby to make it super-duper mirror shine...maybe in 3-4 days lagi...

thanks man...





itu rx7 deep dish ka?

nope...i have to be gigih to make my case pimp'd haha

black i use 2 cans,fluorescent 2 can...and a can of clear

5 cans hell yeah..barang baik mestilah menghasilkan hasil yang berkualiti ...just spray until u satisfy enough...and yeah i do some sanding..

dude,my tempat kerja like heaven to modders...got all thing..acrylic?sticker?spray booth?srcew driver?tell me ...hahaha...even if i want to make "stiker haram" can also...got that graphtec plotter...

dah ada razer lachesis...blue light one

yep...im working at advertising shop...one of the designer...roadsign,lightbox etc...why?want to tempah stiker?

senawang...my tempat keja have graphtec,myjet printer,with roland printer+plotter...and victor engraving...my next project is making new acrylic window with hole for the kipas...buat guna victor engrave

the project is on da way! i'll uploaded it later...besok continue potong...
btw,its just hole only,many hole...no kerawang2 one or any ganas2 one...


i dont do any sanding or primer on the internal part...just spray directly...i clean it before that...my friend told me,to make more mengancam,spray white primer first for any fluorescent colour

mari-mari...datang seremban....hey2...

bro,mau engrave susah mau cover line...bising doh...pay extra la...hahahah....acrylic besepah kalau nak...

a new acrylic with fan holes....4 fans


tu ler...i said to him,why not buy the alienware alx casing...

hey2...thanks...


yeah...today my friend want to spray his skuter,black with 2k clear...why not i join him...2k clear rembat @ tempat kerja jugak


sleeving...pelan2 bro...belum cukup ilmu...hmmm,i'll post my new project mayb today...

haha...bro jangan jelesss....

btw,i'm posting this with using my Mental Mod pc...baru siap pasang....rangka saje...(bukak balik sebab rangka dia calar & respray)

bro bleh tolong gua wt sleeving?

sleeve guno apo?gotah sekerap?haha

bro,malas mau sanding,use paint remover laaa....ok wat...,neway,project tergendala for a while...my friend tak datang kerja...only he know using that engraving machine...

want to see ah my design?nothing special,just lubang2 for angin...tapi template design kat illustrator...i thought of someting ganas like dragon,corak tribal,that was just difficult for the machine to engrave & makan banyak masa...

projek engrave tak jadi lah...so many hole (+) 1 hole (7mm) took about 5++ mins (+) bising (+) orang atas(office) bising (+) tadi hampir kantoi sama bos a.k.a king (+) hati tak tenteram...this project will continue,but using drill...i've made a template using sticker & this project will start this weekend...damn


lu mau spray complete?

1.Sanding (dari kasar ke yang paling halus...1st page dah tunjuk kan? )
2.Undercoat a.k.a primer (depend on what type colour u want to use,if u choose metallic,use u/c silver)
3.spray undercoat 1,2,3 layer @ sampai puas hati
4.cari tempat yang tertutup mase nak spray(untuk elak habuk)
5.utk bhgn luar tu spray la dalam 3-4 layer ke,4-5 layer ke...
6.spray clear..

kos spray projek aku ni:

orange fluorescent 2 tin = rm20(1tin rm10 mahal sebab cat special)
black #30 2 tin = 10(1 tin rm5)
clear free sebab aku jumpa dalam rumah aku
nak dpt hasil lebih kurang mirror effect,spray dekat2...jangan ikut mcm kt tin tu,30 cm dr objek...15cm dr objek pon ok(clear ye!!!1st-2nd layer tu jauh2 pon takpe)
just be extra careful
ape2 brand pon tak kesah,janji pandai spray...cantik la dia...projek ni aku guna anchor spray

New Tribal Sticker!!!♥♥♥♥

Sticker songlap at my office...its a reflect sticker
just made it today before i balik for sembahyang jumaat

here's the shot:

without flash


with flash

want some? i can make for u..

---

Added on June 26, 2009, 6:38 pm
dude,there is no final design...hhehehe
i'll just update & update..........
maybe this weekend ill start my project,drilling hole for 4 fans...
mau guna mesin engraving kantoi...guna drill je lah

This post has been edited by ikhwan666: Jun 26 2009, 06:38 PM