Bro,about the flex pad,1 piece and cover 1 door or what?

Thanks

Not enough... most of the time need at least 2 pieces for 1 door 1 layer.. Even Myvi also need 1+.

Does 1 layer enough? when i turn the sound system on a high volume,it had a distortion noise from the door panel.etc and it sound cheap even thou it was a decent speaker,the distortion sound from the door panel make it sound cheap.....so what do u recommend me to get for the doors "all 4 of them"

Thanks

You have a few options actually...

1. Purely deal with your source of noise. Most likely will be your door trim, but considering the volume... I think you turn on quite loud too.

2. Go for my 2.5 layer package.

3. What is your budget? You can go for 3 layers, like ICE~ car.

Tai kor, remember me? How much to buy material to just do my rear bonnet area? I dont know why my rear bonnet there, sometimes i buy things and put there for while. after few hours drive whole day my car boot super hot ooo.... can reduce heat one ah? is it exhaust heat?

You change exhaust already ah?

[quote]
[quote=MyWifeCar,Mar 9 2011, 02:03 PM]
[quote=noblesse,Mar 9 2011, 01:50 PM]
heya, what is recommended for the inner part of the door metal?
supression pad/propad + flexmat to cover the holes?
KS: Yes, you are right.

may i ask is supression pad/propad & flexmat is self-adhesive?
KS : Comes with adhesive, unless stated. No Dunlop CA glue needed.



[/quote]

thanks for your reply bro!

how many pieces of supression pad do i need for 4 doors viva? is 5 per door adequate?

and also how big is one piece of flexmat? how many pieces do i need for 4 doors?

pm me the bestest gay price for all in bro!

This post has been edited by noblesse: Mar 15 2011, 11:11 PM

Bro, how much for flexmat if i wan it for Wira 4 doors?

Recommended is 10 pieces, which is 1 box per door. If you insist on using 5 pieces for a door, then might as well use Propad...which can dampen better.
Still 10 pieces is the recommended numbers of pad to apply.

Flex Mat is 8 inches by 4 feet. For Viva, estimate 1 layer 2 doors will need 3+ pieces.

So how you want to do it, before I quote you a price for 'gay'. (No offend to gay, just a matter of jokes ~ )

bro...ask u about the d.i.y job for door soundproofing..

for the inner door metal part, is it using the Flexmat, 1 piece is enough for 1 door right?

and then how about the propad and suppresion pad?

what is the right procedure?

Reply as above your Q~ ....

---

Added on March 16, 2011, 12:37 pmWira door too big... need 3 pieces. But shld have extra...

This post has been edited by MyWifeCar: Mar 16 2011, 12:37 PM

If I need to apply the boot floor with noise absorption mat and fender with noise plug, how many pieces require?

1 piece of N.A.M will do.

For noise plug, only applicable to the front fenders. If rear fenders, use 2 pieces of Flex Mat will do.

for avanza firewall? opening my dashboard for aircond servicing. what type is better? and hot many needed?

Nice move bro... You might need 5~6 pieces, so can cover fully from top up to bottom where you pedals are.

adding my feedback:

purchase flexmat from mywifecar on fri. Completed transaction around 3pm. Was not expecting him to ship till saturday or monday but got a pleasant surprise when he text me item has been shipped. thats 3 hours i bank in the money. Now thats what i call FAST. Needless to say, item receive saturday morning and i got to diy my rattling plastic panel that night. Good service. Ups for u bro.

It is you bro....

I wasn't fast. Just that I was ular-ing around that day and near-by was a Skynet office... Normally I will deliver the package in the next morning once the payment is received.

But you know what you want...

I did the fender package.. I can feel the tire noise reduce to an acceptable level for my civic compare from previous..

Driving Civic also complain so much, you cerewet kot ......

More to tell you when we meet-up again.

Where got cerewet bro.. Hahaha..