Can you suggest me soundproof material for following area:
1. Bonnet
2. Door
3. Cabin Floor (fron to back--meant "under firewall" to "under back seat"
4. Trunk Area (floor, side&inner lid)

Im very particular in NOISE, but not ICE fever,Just wan2 make my car as quiet as possible.
Pls give the best solution& price too..

Can you suggest me soundproof material for following area:
1. Bonnet
KS> I'm assuming you are talking about front hood. Then you can use 1 piece of HoodLiner will do.

2. Door
KS>This will depend on how many layers you would prefer. Non-ICE, then you can do 2 layers
Total 4 doors = 2 x Propad, 2 x Suppression Pad and 4 x Flex Mat... And also insulflex, which I do not sell.

3. Cabin Floor (fron to back--meant "under firewall" to "under back seat"
KS>If you have heat gun, then you can use 2 x STP Visomat PB2. If not then you can use around 2 x Dampening Mat and 1 Noise Absorption Mat.
For firewall then you will 4~5 pieces of Flex Mat, but depend on what car you are driving. Waja size might need 5.
For the flooring, there are some specific area that PB2 or Dampening Mat cannot cover... If you wish to have it covered, then you might need ~6 x Flex Mat.

4. Trunk Area (floor, side&inner lid)
KS> 3~4 x STP Vibroplast or 4~5 x Flex Mat. These should cover the side as well, all depend on what car are you driving. Inner lid? No recommended, but if you want, then I need to know what car are you driving.

Im very particular in NOISE, but not ICE fever,Just wan2 make my car as quiet as possible.
KS> Soundproofing is not only for ICErs, normal daily usage will be very helpful too... The less NVH you have in your car, then less tense you will have driving it daily.

Pls give the best solution& price too..
KS> Solution provided. Price is on the first page, negotiable depend on which package that you are going for.

bro, which one suitable for DIY new Vios front hood

Please PM me.

thanks

This post has been edited by thunderbird: Dec 7 2010, 04:49 PM

New vios ..... front hood.

Can opt for HoodLiner, open cell with self adhesive.

bro if i wan to put on 4 piece of door wut do i need?

It will depend on how many layer you plan to do... and what material you would prefer....

Normally I recommend 2 layers. Using Propad/Suppression Pad and Flex Mat/Insulflex.

Would advice you to budget how much you plan to spend....

Do you have STP BOMB?
1 pc how much?

you provide installation??

quote me for whole iswara a/b

1 piece rm 250. 1 box rm1048.00, 5 pieces in a box.

---

Added on December 11, 2010, 7:38 pmSorry ,i do not provide installlation. You will have to try other sellers.


This post has been edited by MyWifeCar: Dec 11 2010, 07:38 PM

how much do i need to buy if i plan to cover all my saga blm four doors??

It depends on how many layer you would prefer to do...

My recommendation:
2 x Propad
2 x Suppression Pad
and 4 x Flex Mat.

how many flexmat and suppression pad do i need to cover 4 doors?

how many suppression pad for roof?

how many dampening mat do i need to cover whole floor?

car is iswara aeroback

can pm me pls...tq

This post has been edited by FizzY DizzY: Dec 15 2010, 01:38 AM

Ok bro... but Iswara is no much diff. from City or Vios....

any deadening/dampening material is suitable for door?similiar to Insudamp? self adhesive?

how many is enough for 4 door single layer? how much?

If you want something like InsuDamp, then Flex Mat is the same kind dampening material.

2 pieces for 1 layer...4 doors will require 8 pieces.

But if you purely want deadning, actually Propad or Suppression Pad is sufficient... At least that is what I would do.

Hi, what is your best price for 3pcs STP Visomat PB2 + delivery to Penang?
Do you have Other STP product? STP Splen?

bro. suggest me the best material for:-

- front hood/engine bay ( to reduce engine noise )
- 4 doors
- boot ( to reduce exhaust sound )

thx ! pm me ya

Ok. Best price pm you.

I have all stp materials, just let me know which materials that you prefer.


1. I have 2 types of hoodliner. With and without the aluminum layer. Rm100 and rm200.
2. You can go for my rm500 package.
3. I don't really have a solution for this one. Best is if you can change the exhaust.

best price 4 persona front n rear bonet..

hi, pm me price of Insulation Foam - 1 piece. thx