Ya take out the front panel first, then just get 1pcs of grit 400 & 1 pc grit 600 will do. I think grit 1000 is too fine. You need grit 1000 only if you are going 4 mirror shine.

So just use the 400 n sand off all the paint that you have applied so that you get a nice clean surface that your paint will eventually stick on.

Then spray the 1 st layer, just make it thin, meaning only 1 pass light coat.

Wait 4 it to dry n use the 600grit n gently sand the 1st layer paint to get a smooth surface, then wash n dry it.

proceed 4 the next few layers of paint, of course wait 4 each layer to dry b4 applying the next coat.

You will have a good paint after this.

You can google some sites that teach you on painting using a spray can.

Hopes this helps.

---

Added on June 13, 2009, 9:16 amOne more thing, i think ur paint didn't stick is b'coz there is some contaminant on the panel, that's y it is very important to throughly clean the surface b4 spraying.

This post has been edited by zzzz52: Jun 13 2009, 09:16 AM