if that's the case use dividers lar since can't get 300 fsb 1:1

dont need liao...
since my proc already langgar tembok...
if hantam vcore lagi... later tembok runtoh then i cham liao.... no proc to use "
hahaha...

Evogenix

Congrats dude.

Finally able to kick that pair of UTT into action aye

u using xp120 maa, so shouldn't worry about the temps that much. i'm sure ur proc can withstand 1.8V for a few hours

Finally got it stable enough to run...

31.187 sec


Attached thumbnail(s)

My New Score
37s
Pentium4 Northwood 3.0 @ 3.75G
Abit AI-7
4 X 512 DT-D43 @ 250mhz@3-3-3-8 @PAT Enable



This post has been edited by ychwang: Apr 13 2005, 09:30 PM

Hey guys, this is my new CAA2C 3500+ 'Clawhammer'. Results attained on stock cooling and temps shot up to around 68-69C while running super pi. Here it is:

Woot!! Impressive... Congrats.

Gonna need to get meself some UTT luvin

Hehe I tried to set CAS 1.5 in A64 Tweaker. System booted straight away

Perhaps more burning in will allow that. arj, here I come for 29 secs!

should be using the utt... right?
if so, try to set the CL1.5 in BIOS and can go for 16clocks on idle cycle limit
tweeke you ram more.. you will get 28/29sec in no time

p/s : use the SPI with mili second

Evogenix

Thanks for the tip Evogenix. Currently testing the ram's stability in windows with prime

Btw, could you elaborate more on the Idle Cycle Limit setting? I haven't done any tweaking at all yet as i'm still burning in the ram. Will start tweaking after I achieve maximum HTT 1:1 first.

Also what does setting it to 16 clocks have to do with CL1.5?

well, Idle Cycle Limit have nothing to do with Cas Latency
decressing "Idle Cycle Limit" will lead you get lower time in SPI

Evogenix

Nicee, thanks for the tip. Currently burning in the ram more at 260FSB

did i saw 'sse2 patched PI'?
whats the diff compared the normal ones?

seems long time didnt update my time.. will try out this weekend

This post has been edited by e-jump: Apr 15 2005, 08:51 AM

Yeap, enhanced for AMD64 processors with SSE2 support. Should help time decrease by 1 sec

Here is mine..

CPU= Intel LGA775 3.0E @ 3.720GHz @ 1.2875v
Ram = PDP Systems 2x512MB (PDC1G3200XBLK) @ 2.5-3-3-5 1T @ 2.85v
Super Pi 1mb = 32 sec

did superPI optimize for SSE3? for same Ghz, Presscott is faster tha Northwood, but other benchmark it doesn.

chiped 1sec off
33sec


Attached thumbnail(s)

why still havent update my score?

can i ask ah if shave off 5 sec in super pi good or not?