Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed
11 Pages « < 6 7 8 9 10 > » Bottom

Outline · [ Standard ] · Linear+

 AMD® Socket AM2&AM3 Overclocking V18, Hmmm...The heat of AMD..is on the way..

views
     
ah_khoo
post Jul 2 2009, 09:39 AM

- No Action Talk Only -
Group Icon
Elite
8,103 posts

Joined: Jan 2003
From: Tanah Lot @ Dungun, Terengganu.
QUOTE(kuntawakaw @ Jul 2 2009, 09:17 AM)
not golden la i guess..since 3.7ghz 1.324vcore.. 3.8ghz 1.43 pun xstable..
hmm... anyone.any link that good for a phenomII oc guidance? im clueless about phenom oc...
*
3.7GHz prime stable w 1.32v is consider very2 gud ledi. all u need is to find a sweet pair of ram doin around 10xxMHz (or above) then u'll have yaself an above average setup. thumbup.gif

may i know what test ur runnin? small fft or belnd test? possible to jack up d ht link a 'lil? smile.gif

actually u don't need to tweak much since ur just playin w multi. voltages + temp play vital role in gettin d chip stable @ high clock. dun forget to play w/ nb freq oc once ur settled w/ highest clock speed + ram freq. wink.gif

This post has been edited by ah_khoo: Jul 2 2009, 09:40 AM
ah_khoo
post Jul 2 2009, 11:20 AM

- No Action Talk Only -
Group Icon
Elite
8,103 posts

Joined: Jan 2003
From: Tanah Lot @ Dungun, Terengganu.
QUOTE(cloudwan @ Jul 2 2009, 11:12 AM)
Miahahahaha, i'm so happy, after updating the bios with Q-Flash, i got myself a X4 again  rclxm9.gif
No need for AFUDOS or etc, just use the built in Q-Flash, but the utility is picky about the type of thumbdrive we use..
My 8GB Kingston Thumbdrive no go but my old 2GB Kingston DT101 works like a charm hmm.gif

» Click to show Spoiler - click again to hide... «


Plus TMnet just replace my modem this morning so tonite can go online laugh.gif
*
finally... congrats bro... rclxms.gif

assignment for tonite, atleast 3.5GHz w < 1.45v... brows.gif
ah_khoo
post Jul 2 2009, 11:30 AM

- No Action Talk Only -
Group Icon
Elite
8,103 posts

Joined: Jan 2003
From: Tanah Lot @ Dungun, Terengganu.
QUOTE(cloudwan @ Jul 2 2009, 11:26 AM)
Miahahaha,, i'll try but i'm not confident thou, my hands are still pailang hands in O/C.. I'll never get good results like u, fuzore or verdict laugh.gif
But there is a niggling prob i facing, after a session of stability test or even benchmarking i did a hand test on the NB i can feel it's really HOT sweat.gif
*
me gud results? u gotta be kiddin me bro... 3.8~4.0GHz benchable is d trend nowadays, i never managed a 3.9GHz benchable result, highest was 3.8GHz sp1m suicide run, that was ages ago w d x3 720BE... sweat.gif

it's more on luck most of d time. as mentioned by sifu bryan, oc is indeed gettin easier & easier nowadays.... nod.gif

This post has been edited by ah_khoo: Jul 2 2009, 11:31 AM
ah_khoo
post Jul 2 2009, 11:54 AM

- No Action Talk Only -
Group Icon
Elite
8,103 posts

Joined: Jan 2003
From: Tanah Lot @ Dungun, Terengganu.
QUOTE(cloudwan @ Jul 2 2009, 11:36 AM)
Well most of the time my luck stops at 3.4ghz laugh.gif
Miahahahaha.. Xper i have to be confident, will try again tonite.. hopefully will register a good oc..
But with the X4 anything above 3.2ghz is already accomplishment for me tongue.gif
Susah mau main with cripple core nih, u never will really know what's their limitation..
But i'm really impressed with most of the Phenom II X2 550's oc here ah, it seem most of them can really fly quite high, sometimes much more easier than the native X4's sweat.gif
*
just give it a shot bro, no harm tryin... have fun tweakin... my xbox360 w old 20' lcd is there collectin dust coz i'm still havin headache in gettin my 810 to run @ 3.5GHz w/ ram @ 1080MHz @ 5-5-5-x, hate it but luv it (d thrills) at d same time... laugh.gif

yup, those unlockable x2 550 are doin extremely well atm, i believe they're of better quality wafers compared to earlier batch denebs/hekas. thumbup.gif

QUOTE(kuntawakaw @ Jul 2 2009, 11:37 AM)
no assingement for me?
anyone?
*
3.8GHz prime stable w < 1.45v is definitely a great achievement for me, go go go... icon_idea.gif
ah_khoo
post Jul 2 2009, 04:07 PM

- No Action Talk Only -
Group Icon
Elite
8,103 posts

Joined: Jan 2003
From: Tanah Lot @ Dungun, Terengganu.
QUOTE(-pWs- @ Jul 2 2009, 04:02 PM)
I guess AMD wont use HT.
As AMD advertised. "Real Men use Real Cores" laugh.gif

-pWs-
*
seriously, they should put more efforts in inventin new tech instead of havin war of words w intel coz at d end of d day, performance still decides who is d better side, put aside d price issue ofcoz... nod.gif
ah_khoo
post Jul 2 2009, 04:44 PM

- No Action Talk Only -
Group Icon
Elite
8,103 posts

Joined: Jan 2003
From: Tanah Lot @ Dungun, Terengganu.
QUOTE(kuntawakaw @ Jul 2 2009, 04:38 PM)
is that means u will jump back to amd side?

btw..the tech is too fast.. since most of ppl can only use 2 cores... but 6cores are out edi..
mebbe when 4cores can be utiliezed, i think that time mebbe 20cores out edi..
*
blame d OS/program for not bein able to take full advantage of d core(s) available in recent chips. tongue.gif

bro -pWs- to come back to AMD? that wud be d day i fetch my kid to kinder i guess... laugh.gif

reaper 1066 is in da house... will test over d w.end... hopefully this pair can enable me to run my x4 @ 3.5~3.6 w/ ddr800 multi. my twinmos max out @ 1066 or slightly below... sad.gif

This post has been edited by ah_khoo: Jul 2 2009, 04:58 PM
ah_khoo
post Jul 2 2009, 04:54 PM

- No Action Talk Only -
Group Icon
Elite
8,103 posts

Joined: Jan 2003
From: Tanah Lot @ Dungun, Terengganu.
QUOTE(cloudwan @ Jul 2 2009, 04:47 PM)
Waaaaa new rams  drool.gif  drool.gif
Got any shots of it? performance rams are making me  drool.gif
*
something like this bro, nothing special... smile.gif

user posted image

courtesy of benchmarkreviews

This post has been edited by ah_khoo: Jul 2 2009, 04:58 PM
ah_khoo
post Jul 2 2009, 05:11 PM

- No Action Talk Only -
Group Icon
Elite
8,103 posts

Joined: Jan 2003
From: Tanah Lot @ Dungun, Terengganu.
QUOTE(verdict @ Jul 2 2009, 05:05 PM)
Now everyone is enjoying with thier new stuff... blush.gif  blush.gif

Hambe keseorangan...  cry.gif  cry.gif  cry.gif

mobo dah ok,then PSU pulak faulty...damn la...unstable rail... doh.gif
*
i'm still w u what sis... fxb rocks... gotta luv it coz it push ram/chip all d way to their limits... thumbup.gif

QUOTE(8tvt @ Jul 2 2009, 05:06 PM)
if wan to look² around..
http://www.tweaktown.com/reviews/2808/giga...oard/index.html

user posted image
*
gud board but price wise... sweat.gif
ah_khoo
post Jul 2 2009, 11:03 PM

- No Action Talk Only -
Group Icon
Elite
8,103 posts

Joined: Jan 2003
From: Tanah Lot @ Dungun, Terengganu.
QUOTE(nicholas0507 @ Jul 2 2009, 10:32 PM)
brother ah khoo,why not get yourself pair crucial 10th anni? smile.gif
*
bro, 2gb not enuf for vista leh... sad.gif

QUOTE(cloudwan @ Jul 2 2009, 10:43 PM)
Becoz he doesn't want 2*1GB, he only wanted 2*2GB kits tongue.gif
*
u know me well bro... laugh.gif

QUOTE(PowerSlide @ Jul 2 2009, 10:57 PM)
nice OC kunta..push more for us to see  biggrin.gif

few choices then..msi g65, asus m4a78t-e and biostar..how bout ECS? anybody got use before?
*
biostar 790gx a3+ or msi g65 get my vote bro, asus... yawn.gif

reaper in action ledi... still tweakin so no teaser... tongue.gif
ah_khoo
post Jul 3 2009, 08:39 AM

- No Action Talk Only -
Group Icon
Elite
8,103 posts

Joined: Jan 2003
From: Tanah Lot @ Dungun, Terengganu.
QUOTE(kuntawakaw @ Jul 2 2009, 11:31 PM)
yup... done with prime... 2secs only at 3.9..hehehe..if orthos still can get few mins..huhuhu
*
that's why i always says prime stress cpu more than orthos... smile.gif

QUOTE(xcen @ Jul 2 2009, 11:42 PM)
sweat.gif

Very disappointed today. Went to Lowyat today, search all over for Vantec ION2+ 450W, can't find. ONly can find in Sri Computers, selling RM200, wth.

Go to rockrock, he say no stock need to wait till tomorrow. Walao, luck so bad, out of all days, restock tomorrow.
*
w/ that kinda amount i would rather top up a 'lil & get myself an enermax fma which is of better quality... nod.gif

This post has been edited by ah_khoo: Jul 3 2009, 09:17 AM
ah_khoo
post Jul 3 2009, 10:20 AM

- No Action Talk Only -
Group Icon
Elite
8,103 posts

Joined: Jan 2003
From: Tanah Lot @ Dungun, Terengganu.
QUOTE(kuntawakaw @ Jul 3 2009, 10:10 AM)
orthos priority 10 stress moar then prime i guess...
but in my case now.. orthos can stand few mins since it only stress 2cores..hehee while prime stress all.

my #2 and #4 ramslot cant work..if put ram into it, system wont boot.at all..
my bad..i can only run in single channel.
flash bios doesnt help..need to reflash since new bios cant unlock..hmmm
*
i beg to differ, i don't really set priority even back to d gud old days when i use orthos... smile.gif

d fail to boot issue is not hardware releated, more on acpi thingy. faced that when i first get my 790gxe 128m as well. put 1 stick of ram, boot w/ vista/xp, do a repair & shutdown. install another stick then boot again... it worked for me, hopefully same for u... nod.gif

QUOTE
P95 stresses higher than Orthos, ~12W higher power draw too at max and the OS scheduling is better for the intended cores than most other stress test software, i.e. you can run a stress test on 2 cores of a quad system and the other two cores can do some work without losing much efficiency (about 85% total 2core performance is achieved) still.


source HERE

This post has been edited by ah_khoo: Jul 3 2009, 10:57 AM
ah_khoo
post Jul 3 2009, 10:30 AM

- No Action Talk Only -
Group Icon
Elite
8,103 posts

Joined: Jan 2003
From: Tanah Lot @ Dungun, Terengganu.
QUOTE(kuntawakaw @ Jul 3 2009, 10:26 AM)
but from my own exp..while using the 4000+ x2... if use prime.. still can do surfing or other thing with no lag..and if orthos priority 10..even to open an explorer will be troublesome..and with same unstable setting..prime only "stop" but orthos turned my pc to freeze,hang crash...
my own experience la... hehe
*
if that's d case u can use task manager to set d priority of p95 as well... orthos is no doubt better in gui, but p95 is d one i trust. check d possible solution to ya no boot w stciks issue... smile.gif
ah_khoo
post Jul 3 2009, 11:50 AM

- No Action Talk Only -
Group Icon
Elite
8,103 posts

Joined: Jan 2003
From: Tanah Lot @ Dungun, Terengganu.
QUOTE(kuntawakaw @ Jul 3 2009, 11:48 AM)
wakakka... duet mana maw carik?
mebbe will send in 2 3 months..now no money and pc is critical for me..
nvm la.. i thinking of stacking all 2gb kit and 4gb kit to make it 6gb..but will sell off 2gb kit since my mobo cant accept.

» Click to show Spoiler - click again to hide... «

*
sb600 = no acc = no free unlocked core(s)... think twice... nod.gif
ah_khoo
post Jul 3 2009, 12:15 PM

- No Action Talk Only -
Group Icon
Elite
8,103 posts

Joined: Jan 2003
From: Tanah Lot @ Dungun, Terengganu.
QUOTE(atleeyoung @ Jul 3 2009, 12:14 PM)
hey, anyone can help me? my superpi mod cannot run ...even at 16k..i just overclocked it to 3.4Ghz (17x200) with 0.05v higher than CPU VCore..
tested with 2 hours of Prime95 smallFFT...any solution?
*
blend test ok? could be ram issue. small fft stresses cpu only... smile.gif
ah_khoo
post Jul 3 2009, 02:59 PM

- No Action Talk Only -
Group Icon
Elite
8,103 posts

Joined: Jan 2003
From: Tanah Lot @ Dungun, Terengganu.
QUOTE(yimingwuzere @ Jul 3 2009, 02:46 PM)
Does anyone know which micro atx boards can do core unlocking for the Phenom X2 550? Also, if some BIOS versions for those board(s) doesn't work, which one must be used?
*
biostar, dfi 790gx matx boards can do core unlocking and able to run those unlocked chips prime stable. smile.gif

biostar: ta790gx xe (confirmed), ta790gxe (awaitin beta bios)
dfi: jr 790gx m2rsh (confirmed)

This post has been edited by ah_khoo: Jul 3 2009, 03:04 PM
ah_khoo
post Jul 3 2009, 04:15 PM

- No Action Talk Only -
Group Icon
Elite
8,103 posts

Joined: Jan 2003
From: Tanah Lot @ Dungun, Terengganu.
QUOTE(albie @ Jul 3 2009, 03:18 PM)
Hey guys, sorry to disrupt your discussion here. Any idea where i can get a AM2 backplate? The MSI GD70 backplate is not suitable for TrueBlack.

Can't really do much with the PhenomII BE with the stock heatsink. doh.gif
*
i believe u need d backplate from tr bro, had d same problem when i tried true on my biostar 790gx 128m b4... smile.gif

QUOTE(cloudwan @ Jul 3 2009, 03:29 PM)
Anyway guys are these fans good for:

CPU FAN:
user posted image

CASE FAN:
user posted image

hmm.gif  hmm.gif
*
one vote for cm 90cfm fan if ur not so into bling2 bro. air flow is gud but kinda plain. nod.gif

will be joinin u soon in silverstone clan... gosh... too much $$$ spent lately... now hutang keliling pinggang... cry.gif
ah_khoo
post Jul 3 2009, 04:42 PM

- No Action Talk Only -
Group Icon
Elite
8,103 posts

Joined: Jan 2003
From: Tanah Lot @ Dungun, Terengganu.
QUOTE(cloudwan @ Jul 3 2009, 04:26 PM)
Will be joining the SS clan? Whut u gonna buy?  drool.gif
Want to know, want to know.. Kalau takut just PM me tongue.gif
Don't worry bro SS worth the money ah, can use 10 years no need to change laugh.gif
*
a black tj-09, w/o window so need to spend another $60 just for d panel mod... sweat.gif

total damage = $320 icon_question.gif

but still, it's $120 cheaper than standard price... hence, i loaned from my wife... inevitably, distortion sound @ my ears... tongue.gif
ah_khoo
post Jul 3 2009, 09:39 PM

- No Action Talk Only -
Group Icon
Elite
8,103 posts

Joined: Jan 2003
From: Tanah Lot @ Dungun, Terengganu.
QUOTE(cloudwan @ Jul 3 2009, 05:24 PM)
He is at singapore ler, the land of the living kiasu :/lol: Dia mana main Lowyat plaza skrg, there he got Sim Lim plaza :/P
*
ko tau gak pasal kiasu2 ah bro... laugh.gif

QUOTE(cloudwan @ Jul 3 2009, 05:29 PM)
Miahahaha, u haven't been poison enuff yet..
Dulu-dulu i was like u, using chapalang case only, what matters the design ok sudahlah..
One day pergi Lowyat Plaza looking at all those ALu cases smpi xleh tido malam.. :/lol:
Skali bila dah beli CM Praetorian trus xmau pkai metal case lg.. :/P
*
yup, my history of poison start when i worked in c-zone for 6 weeks... everyday see ah lian + cm alu case... can touch but can't buy (can't afford)... only when i start workin in sgp i managed to buy my 1st ever alu case... d praety which cost me near RM500... laugh.gif

QUOTE(cloudwan @ Jul 3 2009, 05:45 PM)
When u think like that memang mahal, but think it like this ah, casing u buy now RM800 will last u more than 8~10 years like my old CM casing.. (It could go more kalau u x gatal :/P)
Within that same period how many countless upgrades of the innards have u gone through? See kira2 casing is an investment lagi cheaper in the long term :/P :/lol:
Like when i change to my FT01 i know this case would be with me for another loooooooooooooong time laugh.gif
*
agree that bro... nod.gif


btw, back to topic, initial reaper test... no mind blowin clock speed or crazy frequency on d ram... more works to follow... sweat.gif

Attached Image
ah_khoo
post Jul 4 2009, 10:26 PM

- No Action Talk Only -
Group Icon
Elite
8,103 posts

Joined: Jan 2003
From: Tanah Lot @ Dungun, Terengganu.
QUOTE(-pWs- @ Jul 4 2009, 08:20 PM)
Ya. Sux. Air flow bad.
Graphic card full load. CPU temp increase by 5-8 degree each cores. doh.gif doh.gif

-pWs-
*
woah... that's kinda serious bro... i'm kinda worried bout d tj-09 ledi... sweat.gif

btw, here's latest update bout reaper... smile.gif

Attached Image
ah_khoo
post Jul 6 2009, 10:44 AM

- No Action Talk Only -
Group Icon
Elite
8,103 posts

Joined: Jan 2003
From: Tanah Lot @ Dungun, Terengganu.
QUOTE(cloudwan @ Jul 4 2009, 11:25 PM)
Don't worry ah bro, TJ like FT uses conventional airflow type, it doesn't uses those pelik mobo 90degrees turn laugh.gif
*
hopefully, assemblin d case half way... it's way easier to install components in bigger case. nod.gif

a modular psu is no longer a must but will definitely make things perfect... tongue.gif


more & more unlocking bios nowadays... thumbup.gif

Source
« Next Oldest · Overclockers United · Next Newest »
 

11 Pages « < 6 7 8 9 10 > » Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
 0.0558sec    0.36    7 queries    GZIP Disabled
Time is now: 29th November 2025 - 09:43 PM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.