even without cache, X2 250 performance overall far ahead than X2 7850

Haha..Yeah..its the architechture thats important..
I can say the Newly Released X2(Athlon II and Phenom II X2) performance is ranging from E5200 > E8400..
They are staying in the middle ..And sometimes outperform it at cheaper prices

Yup hopefully it could be the quad core for the masses

yes...amd always aim mainstream. intel going obsolete i7 and out i5 as mainstream

going get amd 955 black edition once my pocket are loaded

im going to get %%)BE lol. (secret code)

550 BE ehh...

abg maverick tt harituh dpt buat WR tak ?

manage to get 5.4Ghz je...

with help by cdlim, he supervise the temp for me...

the 790GX wall make it hard to push...

http://valid.canardpc.com/show_oc.php?id=586499

This post has been edited by verdict: Jun 17 2009, 04:33 AM

how did u know lol.

what is the temp ?

Phenom IIX3 740 (HDZ740WFK3DGI),3.0GHz,95W,rev.C2,SocketAM3,Triple-Core

Phenom IIX4 820 (HDX820WFK4FGI),2.8GHz,95W,rev.C2,SocketAM3,Quad-Core

varies from -120 to -140...
due to mobo can only set the vcore to about 1.55v...

if not, sure the chip burned edi...

the temp should can go under -160
if can
the cpu will get a nice MHZ

you can try using K10STAT

last time went under -150...but then the system wont boot...
so take off evrything and installed back..and decided not to go to -150 anymore.
with 1.55vcore,what the highest u able to obtain?

---

Added on June 17, 2009, 9:47 amthe 6ghz... what temp what vcore?

This post has been edited by kuntawakaw: Jun 17 2009, 09:47 AM

the mobo got limited vcore....max 1.55v.... da is the problem

and that's an a$u$ we are talkin bout...

volt mod is d only option but i don't think d owner will allow...

p/s: it's been sometimes since i last spammed here, anybody miss me...

1.55
I thinks is the CPU-Z VCORE ID right?

thats not the biggest problem
try to get lower temp
add some voltage for the sb and nb

edy try ...with pump a few voltage on nb + sb and temp below bout -150 only can do 5.4ghz

---

Added on June 17, 2009, 10:14 amyup and is GX mobo too...onboard gc chipset mobo...sure got limit for extreme OC
is beter to use non onboard gc mobo...no getting blur which mobo to buy ...pls dont ask me to buy DFI ..unless is UT model
no one miss u coz this is ur 2nd time skip the gathering .....mana u punya DFI ?? RMA ke


This post has been edited by digswell: Jun 17 2009, 10:14 AM

I miss u sis ah_khoo

---

Added on June 17, 2009, 10:23 amDia tarak pkai DFI lagi ah skrg, dia promote DFI tp pkai "B"

This post has been edited by cloudwan: Jun 17 2009, 10:23 AM

alamak bro, my dfi sold long time ledi... now usin lowly 790gxe 128m from biostar > jumped ship to value line. DFI LanParty UT 790FXB-M3eH7 for u bro???

not to bash a$u$ but i think biostar can offer same range of volt (if not higher) on same chipset based mobo, thou they did great w d pwm... 8+1 is no joke but they should be more generous on vcore. what's d use of havin such good power phases but they only allow 1.55v vcore? it's not even enough for moderate oc (suicide ss especially)...

@ bro cloudwan,

pepagi dah sepam...

This post has been edited by ah_khoo: Jun 17 2009, 10:32 AM