Good Day,
    Currently, i'm using Proton Waja Campro 1.6 E year 2007. Current milleage is 110,000 km ++. My best selection of engine oil is Castro Edge Fully Synthetic 5W - 40. Reason , i been using this oil since the past 60 K milleage. Smooth and high confidence with their oil technology.

  Futhermore , i'm a heavy traveller and each month travel estimated 8,000 km. Best saving in terms of servicing . The engine oil service interval recommended every 10,000 km. What's else if i could save 1 x labour fee & 1 x oil filter. Best choice.

    Take my words , previously i'm a crazy driver who used to drive at high speed  at 150 km/h - 185 km/h. Especially, when i'm driving outstation for business trip. My best record is travelling none stop from K.L - Seberang Prai - Ipoh - Teluk Intan and finally reached back to K.L. Total travelling time exactly in the same day is 13 hours for none stop. But the next day , my leg is 100 % cramp

guys, may i know what is the colour temperature for original waja cps headlight?
Is it alright to install 4300k HID on a old waja 4G18?

4300k same as CPS installed on 4g18 also kacao? i know some p1gs will say 'lampu putih, tak boleh' but 4300k is as same as their waja cps rite, can i answer back 'lu boleh, saya mia tak boleh?'
what if i change to the original CPS headlight? (that might sound stupid i know)

To be honest,
i feel that Waja CPS front looks nicer than old one ... 



especially if the headlight after smoked~ 

Let me check with my fren see whether he know stock spring rating or not ...



HERE

Anyone? 

my car doesn't have sport spring, so cannot join  
from the picture, i'm guessing the car are
1) Kancil MultiTurboSilencer
2) Proche Roche 944 5X
3) Lutos 9-Eleven

mine on tein springs and front is ori proton abs..rear is kayaba absobers..still under waranty..used 4 months....wen sell i will post it up...

---

Added on November 12, 2009, 5:07 pm

join laaaaa rydeck....... 

Hello guys!
I am driving a Neo CPS. 1.6 MT. Tranquility Black. 6months old. odo meter still below 10k km. 

Really interested with anything to do with our CPS engine. Hoping to gain more knowledge from all sifu here.

---

Added on November 13, 2009, 9:17 amI am very much interested with exhaust mod. i would like to know which is the best system for CPS as there is an issue concerning the piping size of the aftermarket product like hotbits full system (1.8") with the original piping (2.0"). Does the diameter of the piping affected the exhaust system performance and its back pressure?

FYI, i already read the whole 124 pages inside this thread. phew. some say good to chge all system n some say retain the stock pipings.
so, wic is the best solution?

fazron80
I've change to 1.85 inch pipe december last year. 9 months using it already. But honestly i don't really like it and planning to get a bigger pipe. Maybe 2" or try to get the original piping size. I've tried driving another exhaust modified gen2 cps that maintain its original pipe and quite surprised with the difference. Pickup alot more better than mine.

sphiroth
Just back from TT with lordragos and jctasoga. Spend time 'discussing' with the SC foreman about mods and stuff. He suggest using standard campro non-cps exhaust system for CPS for better pick-up because of the higher backpressure (smaller piping).

eujinee
hotbitz recomend to downgrade to 1.8" ..coz our car CC is 1.6 only.. .compression aint big...mayb lack of back preassure or somethning.......even honda civic 2.0 piping is not 2" la...

so what is the conclusion? should change piping or retain ori piping size?

hope sifus out there could enlighten me with the best opinion n suggestion    thank u in advance

how nice of you to read all the 124 pages.... keep on reading and show us your beast...

here u go bro VerM, my so called beast..hahaha

its part of my list-long project... but its been shelved for the time being until i can get a nice comfy springs/wheels.. hehe...

---

Added on November 13, 2009, 2:07 pm

sorry bro, i've got no comments abt it coz i'm not using it. we shall wait for eujinee or laytiong to comment. i think laytiong will be more suitable to answer coz his car is fitted with the hotbits 4-1 extractor with stock piping and his is a waja MT. Eujinee's is AT with full hotbits kit.

AFAIK, MT doesn't really rely on the back pressure compared to AT. so tats why i would think tat the hotbits extractor + stock piping (2") combo is the combo that i would choose. coz my logic tells me that the hotbits extractor which is 1.8" is good for taking out the hot gasses from the engine and then when it reaches the 2.0 stock piping, it will be purged out quicker due to the bigger exhaust pipe. so i think it will be a good setup. i mean thats my logic way of looking at it but maybe other sifus here might give more comments or correct me.

if you notice laytiong's comments abt his 4-1 + stock piping combo setup, he mentioned he hear 'pom-pom' or 'backfire' sounds after letting off the throttle. Sphiroth also got this comment after he change his extractor to another 4-2-1 (or was it 4-1) extractor brand (not hotbits).

maybe u need to decide when they have tt then u can audit their car.. hehe..

yea include those made from banana tree hehehe...u see even i'm old but my heart still young

---

Added on November 13, 2009, 3:08 pm

not good in long run....my wild guess the head gasket might burned faster then normal condition.

i think u should said..."who already won eujin?".....cabut.....

Well it's quite a long list, but here it is

Brake fluid-RM22.50
Injector cleaner-RM19.00
Screen washer-RM4.90
Element air cleaner gen-2 (Is this Air filter? )-RM23.70
Fuel Filter-RM37.60
Oil filter-RM12.25
Drain plug gasket-RM2.55
Fully syn engine oil-RM180.00
Oil treatment-RM19.00
Gear oil-RM46.50
Radiator coolant-RM28.35
Spark plug-RM42.80
40K maintenance service (WTH is this?)-RM85.00
Service tax-RM4.25

Damage done to my wallet-PRICELESS!

How much is 40k maintenance service in KL? Even if didn't use fully sythetic it's still RM400++.

About 10K service, my sc said can extend service to 10k if use fully synthetic but have to come at 5k to change oil filter only.

That's what my mechanic said to me when i  asked about disc skimming...
thanks for your opinion allan...