Gigabyte P45 [EP45 UD3L], Plz help me 2 oc my rig..
|
|
 May 14 2009, 01:01 PM, updated 17y ago
Show posts by this member only | Post
#1
|
 
Junior Member
86 posts Joined: Oct 2008 From: UiTM Pahang  
|
i used
-E5200 2.5GHz -Gigabyte P45 [EP45 UD3L] -2x1GB OCZ Reaper DDR2 800Mhz -Power Logic 450Watt PSU(standard) plz guide me how to oc my rig.. this my bios interface.. [attachmentid=962974] |
|
|
May 14 2009, 02:46 PM
Show posts by this member only | Post
#2
|
Senior Member
3,812 posts Joined: Dec 2008 From: Eden 
|
why dont u use gigabyte thread? all giga mobo can ask in there...
Added on May 14, 2009, 2:51 pmu can try: 400x8 MCH latch -333 then select ur divider (will show the speed with 333 strap) PCI-e express freq- set to 100 Vcore-try urself Vdimm-try urself MCH core-1.2v oredi good i think. load line calibration-enabled This post has been edited by uzer85: May 14 2009, 02:51 PM |
|
Topic ClosedOptions
|
| Change to: |  0.0131sec
 0.27
 5 queries
 GZIP Disabled
Time is now: 9th December 2025 - 04:54 AM |
Quote