this problem confirm unstable oc or ur psu is not supplying enough power to the mobo,i just experienced this earlier 2day in the afternoon.but mine is during loading windows,stuck there for 10 mins.

so i reset cmos and re-oc my proc and readjust the voltage settings,now stable and running

btw i'm running 520fsb x 8 @ 1.365v.mch core set to 1.4v

This post has been edited by ZeneticX: May 14 2009, 01:03 AM

just ply with ur cpu vcore and mch core,cpu ref and mch ref set to auto,they will do the job.

cpu pll set to normal,setting it to auto will overclock it too much.termination set to normal or auto,after tht use ET6 to see whats the value,then manually apply it to the bios

This post has been edited by ZeneticX: May 14 2009, 01:11 AM

stock is 1066 mhz @ 5-5-5-15.now i'm running at 1040mhz @ 5-5-5-15.since ise 520fsb and i want to run @ 1:1 ratio.thking bout trying 533fsb

northbridge = mch core

i assume ur rig is what it shows on ur sig

can u post up ur bios settings?all of them,sry it may take ur time but it can make us hlp u further

check ur atx 24pin and 8 pin,maybe some of the pins are not properly connected resulting in lower power flow,i've experienced this last time and i feel strange y my pc cant boot up everytime i go higher than 1.3 vcore