Ok.Now a new problem .After i OCed my intel e8400 to 3.6ghz.I try to restart.Then.suddently when want load.It cannot load sucessfully.It takes long time to restart.Then Sudently LED from my mobo came.Then i have wait to 5minutes.Haish....then i press my power start longer then start again...then can load.Whats going on?

reset the bios.

Reset the bios?when i set as difficult it can restart?....so why?can have explanition please?

clear cmos.. if u dunnot what is cmos, plug out the battery. wait 4 awhile, then put it back...

reset your bios then OC again..hahahahaha...pump your vcore & vdimm secukup rasa...

Before this i have clear the cmos....

---

Added on May 14, 2009, 12:44 amHuhu....

This post has been edited by sevensigns: May 14 2009, 12:44 AM

b4 this u edi oc any proc?or u oc ur pro with people guiding u?

im guding with treat in here...

why you dont ask OC member in here..before you try & error..sure many sifu's can guide you...

just clear it again la ur CMOS.... OC it as stable as it could... if sometin weird happen...not stable lorr...

Sifu already sleep.Also watch a drama.Hehe....

voltage up,suma up....cooler down,temp up.....temp terlalu up,rosak proc nya...haha

Klau rosak proc. x berjalan le.Hehe...

i use i45 and e8400 oso
this my 2nd time oc'ingfew tmes error than later reach 4.1ghz
do it slowly and with guide
reading only is no gud

Clear CMOS?okey.i try...

btw vcore how much?
ram speed n core?
fsb?
hahaha
btw im still a nub in oc world

in the mean time, up vcore 1.3v, nb 1.3~1.4v, vdimm 2.2v, timing 5.5.5.18... sure stable at 3.6g

2morrow morning ask ur sifu

uhh forgot ur e84 wat steping?

base on his CPUZ, is EO stepping

gamers maniac can be your sifu TS

slalu kalau x leh restart ke,bila log on x btol ke..mmg clear cmos je..or take out the battery...tp kalau syg benda dun pump to much voltage..but if u want to kitai abis2 ur proc for benchmarking..silekan..=P

hurm
i think 1.4v is enuf to run @ 4.0---stable

this one is sifu oso
hehehe
ello sifu
how r u?

gamers maniac tgh bahagia tu..die sanggup tlg TS...hehe...

Okey.let me explain..to all of u...


CPU Freq=400*9

Ras to Cas=5-5-5-15

CPU voltage control set only 1.3v

nb n all thing not set...

increase vcore a little

ceh mengada..aku amd ja..x mampu intel=P..tido lu..sok kelas..haha

hahaha
i think i ll surrender coz im still learning OC'ing
i dunwan to giv wrong instruction
better asking expert
hehehe
sorry TS

This post has been edited by irienaoki: May 14 2009, 01:03 AM

vcore?to much man.if 1.4volt.can be harm right?

this problem confirm unstable oc or ur psu is not supplying enough power to the mobo,i just experienced this earlier 2day in the afternoon.but mine is during loading windows,stuck there for 10 mins.

so i reset cmos and re-oc my proc and readjust the voltage settings,now stable and running

btw i'm running 520fsb x 8 @ 1.365v.mch core set to 1.4v

This post has been edited by ZeneticX: May 14 2009, 01:03 AM

TS..better g tanye dalam thread oc for intel..konpom banyak gile org tlg..

p/s:jgn lupe..waiting 4 ur answer bout ehem2..peace TS..=)

This post has been edited by moomoojojo: May 14 2009, 01:06 AM

can share with me ur setting?

---

Added on May 14, 2009, 1:05 amno problem....

---

Added on May 14, 2009, 1:05 amyeah...sure

This post has been edited by sevensigns: May 14 2009, 01:05 AM

btw i'm running 520fsb x 8 @ 1.365v.mch core set to 1.4v

he setting

erm im using C0 steping and vcore 1.4...
the temp will increase a bit
E0 is better as it use lower voltage to run higher clock (stable)...if im no mistaken....

just ply with ur cpu vcore and mch core,cpu ref and mch ref set to auto,they will do the job.

cpu pll set to normal,setting it to auto will overclock it too much.termination set to normal or auto,after tht use ET6 to see whats the value,then manually apply it to the bios

This post has been edited by ZeneticX: May 14 2009, 01:11 AM

@ZeneticX
bro..ur ram brp speed n timing

stock is 1066 mhz @ 5-5-5-15.now i'm running at 1040mhz @ 5-5-5-15.since ise 520fsb and i want to run @ 1:1 ratio.thking bout trying 533fsb

me running @ 450*9
still learning though

manual in bios...how word by nb and vdim?in giga bios....help me..

northbridge = mch core

yes bro..MCH core...

Moved to Q&A due to nature of thread.

Please read pinned and existing thread before posting a new thread


//Moved to Q&A

haish.still got problem....cannot restart.it because of mobo?

i assume ur rig is what it shows on ur sig

can u post up ur bios settings?all of them,sry it may take ur time but it can make us hlp u further

okey.today i already checked my rig...i suspect in front my casing was have a shortage.why?when i touch the front panel a few on times.they have some shortage and restart.so how to do now?

u r lucky u didnt get any BSOD...when i OC my proc..always got BSOD(maybe my mobo sucks)..lolz..
maybe its time to change new proc...

this usually happen when the floppy drive power connector is not connected properly...

or PSU 24pin there something wrong...

i dont use floppy.maybe psu 24 pin have a problem.need to check it

did you pump you vcore?

of course..it turns out my mobo not suitable for OC...
+0.05v every pump up..

set you vcore 1.4v then vdimm to 2.1v timing 5-5-5-15 sure no BSOD

if your mobo can do la...

hurm vcore is 1.4...but vdimm cant...im using valueRAM...

just for benchmark only..if you can value set to 2.1v..but dont run 24/7 la..this is just for fun...

scared to try it..wat if my rams goes boom..lol..
well im searching OC stable 24/7...

haiya....anyone.please....help me...

This post has been edited by sevensigns: May 14 2009, 11:16 AM

p45 quite nice for oc...emmm..u reset cmos alredi?take out the battery?..then re'oc back slowly

did you try to flashing with new bios for your mobo?

ya.. it was like a format button... everytime i goes wrong with OC i do that...

flash ur mobo n update bios..then clear cmos..n start OCing..

check ur atx 24pin and 8 pin,maybe some of the pins are not properly connected resulting in lower power flow,i've experienced this last time and i feel strange y my pc cant boot up everytime i go higher than 1.3 vcore

should be not enough vcore/vdim

okey.i was follow ur instrustion.today i go the hardware shop and buy a some cable can managed my pc.then i start to bogel my pc.then when i try to oc.try to oc.and now very stable....for 1hour....