slalu kalau x leh restart ke,bila log on x btol ke..mmg clear cmos je..or take out the battery...tp kalau syg benda dun pump to much voltage..but if u want to kitai abis2 ur proc for benchmarking..silekan..=P

hurm
i think 1.4v is enuf to run @ 4.0---stable

this one is sifu oso
hehehe
ello sifu
how r u?

gamers maniac tgh bahagia tu..die sanggup tlg TS...hehe...

Okey.let me explain..to all of u...


CPU Freq=400*9

Ras to Cas=5-5-5-15

CPU voltage control set only 1.3v

nb n all thing not set...

increase vcore a little

ceh mengada..aku amd ja..x mampu intel=P..tido lu..sok kelas..haha

hahaha
i think i ll surrender coz im still learning OC'ing
i dunwan to giv wrong instruction
better asking expert
hehehe
sorry TS

This post has been edited by irienaoki: May 14 2009, 01:03 AM

vcore?to much man.if 1.4volt.can be harm right?

this problem confirm unstable oc or ur psu is not supplying enough power to the mobo,i just experienced this earlier 2day in the afternoon.but mine is during loading windows,stuck there for 10 mins.

so i reset cmos and re-oc my proc and readjust the voltage settings,now stable and running

btw i'm running 520fsb x 8 @ 1.365v.mch core set to 1.4v

This post has been edited by ZeneticX: May 14 2009, 01:03 AM

TS..better g tanye dalam thread oc for intel..konpom banyak gile org tlg..

p/s:jgn lupe..waiting 4 ur answer bout ehem2..peace TS..=)

This post has been edited by moomoojojo: May 14 2009, 01:06 AM

can share with me ur setting?

---

Added on May 14, 2009, 1:05 amno problem....

---

Added on May 14, 2009, 1:05 amyeah...sure

This post has been edited by sevensigns: May 14 2009, 01:05 AM

btw i'm running 520fsb x 8 @ 1.365v.mch core set to 1.4v

he setting

erm im using C0 steping and vcore 1.4...
the temp will increase a bit
E0 is better as it use lower voltage to run higher clock (stable)...if im no mistaken....

just ply with ur cpu vcore and mch core,cpu ref and mch ref set to auto,they will do the job.

cpu pll set to normal,setting it to auto will overclock it too much.termination set to normal or auto,after tht use ET6 to see whats the value,then manually apply it to the bios

This post has been edited by ZeneticX: May 14 2009, 01:11 AM

@ZeneticX
bro..ur ram brp speed n timing

stock is 1066 mhz @ 5-5-5-15.now i'm running at 1040mhz @ 5-5-5-15.since ise 520fsb and i want to run @ 1:1 ratio.thking bout trying 533fsb

me running @ 450*9
still learning though

manual in bios...how word by nb and vdim?in giga bios....help me..

northbridge = mch core