3M THERMAL CONDUCTIVE INTERFACE PAD sell by niclasteoh

anyone using it??i have a problem...it doesnt working for me...my cpu temp went up to 80 and overheated=

where u used it? and before using the pad, u using wat?

lol u used thermal pad with ur HSF
why dun used thermal paste bro

definitely thermal pad doesnt perform as well as thermal paste
u should use good paste such as tx2 / as5 / etc
not thermal pad

3M thermal pad not really suitable for proc... use liquid based instead ... if u wan industrial paste, try looking for loctite... if u wan consumer products, tuniq tx2/nanofusion/arctic silver/arctic cooling mx2 and so on

ya..not recommended to use the pad for proce, normally we use it for northbridge or southbridge or even ICs

wo..thermal pad not suitable for cpu..that way your cpu overheating.
use thermal paste la..recommended tuniq tx2.

dude, its not suppose to be used by your proceessor

its a thermal interface pad for sticking ramsinks aka little pieces of metal to your ram, or small chips on electrical components

ps. you have successfully voided your processors warranty, please clean it off before the tape melts further

There you go It's like using balloons instead of condoms so obviously that would result in undesirable results. Please use thermal compound instead.

lol, not plastic cling wrap? XD

WTF............Epicness
@TS,use thermal paste on processor lar
These pad are only for mem chip and so on,not processor with high heat output

ur proc crying wor

ok now its time to open dispute againsts the seller for selling the pad.

that pad isn't for processor mah...somehow ts use it for processor

is not for processor meh AMD use it often ma .

Which AMD processors actually uses a thermal pad?

heat from cpu is way higher than on mobo chipsets/ram

u need to transfer fast fast to the heatsink and most conductive is artic silver and freinds.

yo bro give me an example plz if u have a pict even better......

if i not mistaken Old Series like Opteron

any ex-opteron users here that can confirm his tq...

U got to be kidding me, i been thru countless of AMD cpu, never have i seen AMD using thermal tape for their cpu..
Thermal paste that looks like thermal tape quite a lot though..

johnkor pls don't talk crap

Opteron is server processor like Xeon in Intel =.= and FYI it's not old.

IMO, for anything that needs to be cooled, if there's proper mouting for the cooler (eg through-bolt or clip), use thermal paste. if there's no mounting for it (eg VR chipset, MOSFET, ram, whatever chips), use thermal pad so that your cooler (normally heatsink) can stick to it.

say wrong liao la sempron a

I am using Hitachi's industry thermal paste for my proc, not sure if it's okay, but been using for few months, idle temperature is around 40C for my proc

lol...but niclasteoh say the thermal pad is usable on proc

pic of sempron use thermal pad or u r talking crap jonkok

PM him about this thread and see what he say .

excuse me,

have a question:
Where do I can get my hands on these pads?
Need them for my GC's memory chips..

Thanks in advance

http://forum.lowyat.net/index.php?showtopic=739435