Ermmmm seems like UK business too good and have not get any response for more than 2 days with few message to ask for estimation time. Not even a single message inform about how soon they can revert. Perhaps their service not that great in Email communication. A bit disappointed, perhaps need to visit their showroom personally but it is too far for me thought.

They are looking for more staff - designer. u know la...most designer want to work in city/town only. hard to get designer to work in kajang even they pay 50% higher in market rate.

I think their staff spend most of the time deal with walk-in customer, sometimes we also need to wait another 1-2 hour ..u know la...discussion abt kitchen cabinet + drawing on the spot...it will take up 1-2 hour.

Most of my fren also email them but they will getting the reply after 1-2 week time. If urgent then you should visit them.
Every 1 here and outsider all know they got provide free quotation and 3D design, so i also not sure how many email they receive every day...

---

Added on March 1, 2012, 5:14 pmThe gas tank is not heavy ...i put it on the cabinet itself too.

This post has been edited by wrb7878: Mar 1 2012, 05:14 PM

Our area is Puchong. How about u? We haven't finalise yet, still looking and getting quotes.

That sounds quite cheap. Where is this cima lighting? I planning to go to Houses Lighting in Puchong this weekend to check out

I have electrician to install all the light and ceiling fan...rm10 per item....too bad he is very busy.

Why not u call them up. They will give u designer number and straight away go your house for measurement and quotation on the spot.

hi,share with all my company project.location at Desapark city.

Full height cabinet with 3G door.



Uploaded with ImageShack.us

Island table + platfrom with lighting



Uploaded with ImageShack.us

Tall unit


Uploaded with ImageShack.us

This post has been edited by steve426: Mar 2 2012, 11:12 AM

how much is the island w/ platform and lighting?

Wow. So nice. Would you mind to share if I already have concrete top and I plan to do a kitchen cabinet with similar size and material (without island), how much would it cost ya ?? PM me if the price is sensitive. Thanks.

guys...looking for KC with 3G and granite table top

15' 3g base unit rm5700
16' 3g wall unit rm3520
20' black granite rm4800

total 14020

is this all within industry prices?

I help u estimated price quote from unity kitchen before discount. RM10K++
15 x 265 = 3975
16 x 205 = 3280
20x180=3600

---

Added on March 2, 2012, 3:45 pmLast time i also want to do like this with wall and ceiling platform....i think platform itself will cost RM1K++


This post has been edited by wrb7878: Mar 2 2012, 03:46 PM

Haha, bro the price different only rm5 psf. Actually not much different..Both material also use crystal glass, different only the frame, so we don't like to create another name to confuse customers. For 3G glass door at least we have 3 different types, if I name it all then we will have 4G, 5G and 6G....So better just tell my customers it is crystal glass door. Beside that, if the crystal glass don't cover with frame, the edges of the glass need to polish to reduce the sharp edge, AND it can easily chip or crack at the edge...So we seldom push this kind of doors. But we keep trying to reduce the size of the frame for 3G doors, so if you look the our 3G door, you only can see 2mm frame..



Beside that, if you don't like aluminum frame but prefer glossy surface, you can choose high gloss doors, membrane press doors, acrylic doors..etc
hope you can understand don't come and kill us, heheh!


Best regards!

---

Added on March 2, 2012, 7:55 pmHaha! We don't even meet up you already said disappointed on our service? For your info, I already mentioned here many times I don't reply on NEW MEMBER's pm, because there is a contractor here like to register many NEW MEMBER acc and comment his own works or ask quotation from me, if you don't understand pls refer back to PAGE 62.

http://forum.lowyat.net/topic/1026261/+1220

Therefore maybe you can direct come to our showroom when you free, we will provide FREE 3D drawing and quotation.
Thanks and have a nice day!

---

Added on March 2, 2012, 8:05 pmBro!! Only you understand me!! So touching lah!!! Hahah!!
For those who came to our showroom during weekend they will understand that we are trying our best to provide drawing and quotation.
We already OT for whole week to reply all email just because we promise to reply within 7 working days.
Bro, you already read this thread so many years and i believe you also watching UK growing up, till today we still trying to improve and improve~ Cheers everyone!!


This post has been edited by Erny_Looi: Mar 2 2012, 08:36 PM

wah... 1k arr.... better not do tat lor....

Long time no log in here already.
I try to quote u estimate price from everskill design.

3G base unit. 15 ft x rm180-2700
3G wall unit. 16 ft x rm160-2560
Granite top. 20 ft x rm180-2700

Total amount less than 8k.

This post has been edited by may star: Mar 2 2012, 09:48 PM

But 1K is really worth for it else next time you need to pay more when u have money to do it...haha
with the partition platform at bar counter....it look more balance between my kitchen and dining area.
mine design is simple and cheaper...less than 1K...special price from patrick.

---

Added on March 2, 2012, 10:06 pmwow....3G door is so cheap? Normally melamine board for base is 150ft onward.

This post has been edited by wrb7878: Mar 2 2012, 10:06 PM

hi,nice to meet u.how many length u want to do??

This post has been edited by steve426: Mar 2 2012, 10:44 PM

Hi all,
I got this quotation from my contractor:

3G Glass (Full Height-wall) 23ft= 11500
3G Glass (base unit) 31ft= 7750
Tall unit 2ft=1600

FOC:
Aluminium Door for sink area- 1 set
Pull Out Basket- 1 set
Pull Out Bottle Rack- 1set
Corner Basket-1 set
Botti Soft Close System (all hingers and drawer runner)
Gas Spring- 4 pcs
Magic Mirror door-3 pcs
Frosted Glass Door-3pcs

Does the price quoted is reasonable?

I like UK design. But unfortunately, they dont accept outstation job at the moment.

Is UK provide design services at minimum price kah??

i have quite small kitchen and another part of it is below the staircase. so the ceiling is not flat one. like L shape one. gotta hide it with plaster ceiling and make it flat.

In Malacca?? u can find forumer leeyung, he also from Malacca, hehe...

anyone used matt surface as concrete table top? Can share or advise any bad of matt surface?

Go few tiles shop also said normally choose white or black shinning tiles as top...

Hi ,

may i have your carpenter's contact. The quotation you had in here are very very cheap.

cheers