nice... can I know how much budget should i put to get this kind of KC...
thanks...

Does this mean the mosiac goes behind the wall units? Or just a small gap before the wall unit? Thanks

Hi LYN forumers,

My first post and decided to do it here

Been following this thread and finally decided to approached Unity Design. Drop by at their showroom on Tuesday 4th Oct and met up with Ms. Esther ... pleasant service and she is very accomodative.

The best part is, I've accidentally broken their discussion table but still managed to get out from there FOC !

My apology Erny and Team !!!

This post has been edited by khairul@anwar: Oct 12 2011, 02:12 PM

Update my KC from Tim (Eleganz design), Hood and hob Fotile set + Maha sink + Sorento taps from Zheilwane.

Big thanks to Tim and team for completing my KC at such short notice. There was a delay from my tilers, which in terms delayed Tim from getting the final measurements. But they were kind enough to speed up production to install the KC for me before my move in date.










Attached thumbnail(s)

I just doing what the best that i can do,

what is the cabinet material? arcylic or 3g?

its 3G material. almost went for acrylic, but due to budget and long term maintenance concern, finally chose 3G glass...

[quote=ezonemy,Sep 29 2011, 05:22 PM]
[quote=jerm,Sep 29 2011, 03:24 PM]
can anyone list down the numbers or email addresses for these people? tried to PM them, but i did not get any replies

1) Steve -
EVERSKILL DESIGN (001931396-D)
EMAIL:Everskill_Design@hotmail.com
38,jaln tpp 6/4,taman perindustrian puchong,
seksyen 6,batu 12,jalan puchong,
47100 puchong,selangor.

TEL:03-80625703 FAX:03-80611924

Sale Person :steve
Handphone :0163743792

2) Erny-
Unity Design
No.39A (First Floor), Jalan Prima Saujana 1/1A,
Taman Prima Saujana, Seksyen 1, 43000, Kajang, Selangor.
Tel: +603 - 8737 3708 | Fax: +603 - 8737 3308
Working Hours: 10am to 6pm. Closed on every Wednesday
enquiry@unitydesign.com.my

3) Eleganz Concept -
4) Jeff2323-
Artak Kitchen
No 47-47A,
Jalan Mega 1A,
Taman Industri Mega,
43500, Semenyih.

Tel: 012-6252528 (Jeff Hew)
: 03-87242528

Email: v8my@yahoo.com

[/quote]
hi all,actually my factory is move already near by one year.the new add for my factory and showroom for puchong branch is 6,jln industri mas 9,taman mas,puchong,47100,selangor.contact number is 0380625703.
showroom add for seri kembangan branch is 23,jln bpp 8/1,pusat bandar putra permai,seri kembangan,43300,selangor.contact number is 0389431948.
the new showroom will coming soon.after complete sure will update here,thanks all

This post has been edited by steve426: Oct 12 2011, 05:15 PM

may i know what is 3g door material? aluminium frame, glass, color sticker? anything else?

steve,

what is the material on the wall between the kitchen top and wall cabinet?
is it supplied by you ?

hi,nice to meet u.between the wall unit and base unit is colour glass.sure we can supply

Is not 3G expensive than acrylic? How the classification on those material?

Actuallly for 3G,can i dun want the aluminium frame cos i prefer seamless

yes i have seen seemless frames but again...extra $$... infact i almost considered that for my KC too, until i finally gave in , needed the extra $ for a new fridge lol

By seamless you mean factory moulded doors?

Am in market for a new KC myself for the wet kitchen. Kind of lots to figure out for materials including countertops.

Those like acrylic or sprayed paint type.

Thanks. Learned something.

About KC carcass, are there different materials used by different suppliers? Heard melamine is good. Checking here for feedback.

Most of the KC carcass will made by melamine, and 2nd option is some ppl dont like melamine at all, they will use block board (kind of natural ply wood) to build the carcass.

share with all,walk in wardrobe with antijump sliding door.location at bandar kinrara



Uploaded with ImageShack.us



Uploaded with ImageShack.us

This post has been edited by steve426: Oct 15 2011, 01:26 PM

guys, need some advice. my house (not yet 100% completed) has this kitchen top built in...if lets say i wanna go for ikea's kitchen set, this thing has to be removed rite? anybody has idea how much?