Outline ·
[ Standard ] ·
Linear+
Renovations Kitchen Cabinet
|
magnifizio
|
 Sep 29 2011, 11:24 AM
|
Getting Started
|
Had my kitchen area and wardrobe done by the following: Kitchen Cabinet 10ft + Bar Area 8ft (approximately) RM9500 by Everskill Design (Steve) Fotile JX05+HD1B + Johnson Suisse Tap by Builders Hardware (Zean) Ikea Bohelmen 1 and a half Stainless Steel Sink Sliding Door Wardrobe 5ft (2 units) by Everskill Design (Steve)  I need to thank Steve from Everskill and his guys for his work. I choosed Everskill as they offer the best price in 3G glass. Many plus points to their cabinet.  They even help me install the lights and install Ikea Handles instead of the 'common' 3G glass door built in handle.   This post has been edited by magnifizio: Sep 29 2011, 11:25 AM |
|
|
|
|
|
Life_House
|
Sep 29 2011, 12:01 PM
|
|
|
QUOTE(Erny_Looi @ Sep 28 2011, 03:07 PM) The standard design for wall thickness is 100mm to 150mm. For bearing wall for some condos will be around 100mm. Bearing wall is for those building without minor column. So the wallplug/screw is only 3 inch / 75mm, and only 60mm will be in the wall. So it is ok for u to fix the tv bracket on the wall.  Only low cost flat will use block wall, it is empty inside, the purpose normally to divide the area and it will provide minimum load to the structure. So if the wall is built by block wall, then u can't hack or fix any screw on it. Hope this info helps~ cheers! thx for the detailed explanation .. Is there any way to verify whether it's "bearing wall" or "block wall", as the wall now oledi painted properly ? |
|
|
|
|
|
jerm
|
Sep 29 2011, 03:24 PM
|
|
|
can anyone list down the numbers or email addresses for these people? tried to PM them, but i did not get any replies
Steve
Erny
Eleganz Concept
Jeff2323
This post has been edited by jerm: Sep 29 2011, 03:25 PM
|
|
|
|
|
|
ezonemy
|
Sep 29 2011, 04:22 PM
|
Getting Started
|
[quote=jerm,Sep 29 2011, 03:24 PM]
can anyone list down the numbers or email addresses for these people? tried to PM them, but i did not get any replies
1) Steve -
EVERSKILL DESIGN (001931396-D)
EMAIL:Everskill_Design@hotmail.com
38,jaln tpp 6/4,taman perindustrian puchong,
seksyen 6,batu 12,jalan puchong,
47100 puchong,selangor.
TEL:03-80625703 FAX:03-80611924
Sale Person :steve
Handphone :0163743792
2) Erny-
Unity Design
No.39A (First Floor), Jalan Prima Saujana 1/1A,
Taman Prima Saujana, Seksyen 1, 43000, Kajang, Selangor.
Tel: +603 - 8737 3708 | Fax: +603 - 8737 3308
Working Hours: 10am to 6pm. Closed on every Wednesday
enquiry@unitydesign.com.my
3) Eleganz Concept -
4) Jeff2323-
Artak Kitchen
No 47-47A,
Jalan Mega 1A,
Taman Industri Mega,
43500, Semenyih.
Tel: 012-6252528 (Jeff Hew)
: 03-87242528
Email: v8my@yahoo.com
|
|
|
|
|
|
steve426
|
Sep 29 2011, 09:54 PM
|
|
|
mr leo,thanks for ur good comment.  This post has been edited by steve426: Sep 29 2011, 10:01 PM |
|
|
|
|
|
xSean
|
Sep 30 2011, 12:27 AM
|
|
|
can anyone plz pm the quote for kitchen table top DOOR only? size is around 13 fts with different type of door material...
|
|
|
|
|
|
Serofax
|
Sep 30 2011, 09:27 AM
|
|
|
3) Eleganz Concept - No7-1, Jalan Kenari 12, Bandar Puchong Jaya, 47100, Puchong Selangor Its facing the LDP under the flyovers, close to NEWAY. hp : 019-3812567 (Tim) email : tim@eleganzconcept.com ===================== hving my granite top installed tmr  This post has been edited by Serofax: Sep 30 2011, 09:29 AM |
|
|
|
|
|
jerm
|
Sep 30 2011, 10:39 AM
|
|
|
ezonemy, thank you very much!
|
|
|
|
|
|
Hannibal
|
Sep 30 2011, 01:08 PM
|
Getting Started
|
Went to eleganz concept today and was told it was closed for 3 days.... then tried everskill design but couldn't find the shop even when I was already on the correct road..... damm, wasted so much time just for the jam!
|
|
|
|
|
|
windwong
|
Sep 30 2011, 01:16 PM
|
Getting Started
|
Can i ask what is the difference of installing a built in oven at waist level, slightly below waist line and underneath the hob?? I have a very limited wall space in my new house. If i put the oven at waist line, meaning I'll probably lost out a full height cabinet which i really want.
A KC installer tell me is because if it is underneath, the steam/heat of the oven will easily hurt the person because steam comes out quickly from the oven.
what is ur suggestion?
|
|
|
|
|
|
Serofax
|
Sep 30 2011, 05:33 PM
|
|
|
QUOTE(Hannibal @ Sep 30 2011, 01:08 PM) Went to eleganz concept today and was told it was closed for 3 days.... then tried everskill design but couldn't find the shop even when I was already on the correct road..... damm, wasted so much time just for the jam! its better u call Tim to arrange a meet at his showroom. thats what i did the last time |
|
|
|
|
|
Jo_da48
|
Sep 30 2011, 06:20 PM
|
|
|
QUOTE(Jo_da48 @ Sep 27 2011, 04:14 PM) The external for the KC normally with be 3G, Acrylic, etc. But the internally make up of solid wood or two pcs plywood join together or? Will this also part different on cost too? Any one could confirm / check what the KC internal are make from??? Solid wood or two pcs plywood (will able to determine through the sound when Knocking) |
|
|
|
|
|
zheilwane
|
Sep 30 2011, 09:39 PM
|
|
|
magnifizio : Bro, can share photos of the Fotile Set and Johnson Suisse tap?
This post has been edited by zheilwane: Sep 30 2011, 09:40 PM
|
|
|
|
|
|
Erny_Looi
|
Sep 30 2011, 09:49 PM
|
Getting Started
|
QUOTE(Life_House @ Sep 29 2011, 12:01 PM) thx for the detailed explanation .. Is there any way to verify whether it's "bearing wall" or "block wall", as the wall now oledi painted properly ? Easier way is to hack the wall, bearing wall built by concrete and steel rod, block wall is brick but hollow inside. Pro way is read from the structure plan.  |
|
|
|
|
|
weikee
|
Sep 30 2011, 09:54 PM
|
|
|
QUOTE(Erny_Looi @ Sep 30 2011, 09:49 PM) Easier way is to hack the wall, bearing wall built by concrete and steel rod, block wall is brick but hollow inside. Pro way is read from the structure plan. Erny, So busy ah. You coming my house this Sunday? or Erik? |
|
|
|
|
|
Erny_Looi
|
Sep 30 2011, 10:16 PM
|
Getting Started
|
QUOTE(weikee @ Sep 30 2011, 09:54 PM) Erny, So busy ah. You coming my house this Sunday? or Erik? Haha! Are you Tan? I meet Tan this sunday. Actually now I seldom go site, more focus on management. Hehe! I got almost 10 designers and all of them are pro and friendly. So hope all friends here can give them a chance to serve you guys. |
|
|
|
|
|
weikee
|
Sep 30 2011, 10:35 PM
|
|
|
QUOTE(Erny_Looi @ Sep 30 2011, 10:16 PM) Haha! Are you Tan? I meet Tan this sunday. Actually now I seldom go site, more focus on management. Hehe! I got almost 10 designers and all of them are pro and friendly. So hope all friends here can give them a chance to serve you guys. Aiyah, me not Tan la. |
|
|
|
|
|
phoenix69
|
Sep 30 2011, 11:04 PM
|
|
|
QUOTE(weikee @ Sep 30 2011, 10:35 PM) Erny , If you are around USJ, can also drop by my place to quote me. Just when will you be around this area. You give the date, if I am around, I make the second appointment with you  |
|
|
|
|
|
weikee
|
Sep 30 2011, 11:36 PM
|
|
|
He too busy already. Today cannot get hold of him too. Even the staff only give Erick number.
|
|
|
|
|
Quote
0.0210sec
0.33
6 queries
GZIP Disabled