proud owner of intel P4 2.66ghz@ 3.8ghz using CM V8 reporting in...

sooner or later it will be add in  775 d..

haha

@llutephie,going to replace your P4 EE already?

Your P4 EE is going to let go soon? Your rig is a very high end set in our old school P4.  

Yeah Kingston Hyper X but dunno what chip inside also
Stock SPD at 3-3-3-8
Gonna do testing soon

---

Added on December 2, 2009, 12:02 am

Update, ok the KHX3200 1GB x 2 I have here is crap. CL2.5 it won't boot at higher speeds than stock, have to use CAS 3 only
5:4 if RAM more than 204Mhz it won't freaking boot
Tried 3-4-4-8 250Mhz 1:1 at max 2.8V with PAT off it won't go into Windows, tried 3-3-3-8 also is useless (So its not a TCCD/Hynix)
Now trying 230Mhz 1:1 3-3-3-8 at 2.8V (maxed out RAM voltage is easier). Guess I suspect this KHX performs more or less the same as my Aeneon RAMs ~_~
235Mhz 1:1 3-3-3-8 2.8V will blue screen sooner or later, really dissapointing

Guess need to get Hynix D43s to OC ~_~

@llutephie,i thought u want to let go your P4EE rig?

Mobo problem? Reset the bios doesn't help any?

Maybe can try resitting the hardware, and check the rams too. sometimes might be due to faulty rams.

Sorry to hear that, did something just strike the board from not working? As your previous reply only mention the PC can't on.

Hopefully the whole system is fine. If I'm not mistaken, the board is bought recently right?
Well if mobo gone then replacement sc478 is very hard to find now.