sometimes i cant even load into 192.168.1.1,any1 can help me with that?

if you're using a splitter, check the splitter. try connect directly to your computer and test again. hope that helps.

Using the DSL filter or direct through computer also the same thing......headache~!!! Guess is the line problem~!

pltan .. u try checking ur splitter or inside socket .. sometimes ur connection wire internal and TM wire need to be repair ..

---

Added on April 14, 2009, 11:17 pmpetrading .. without internet connection .. i still can load to 192.168.1.1 .. try checking ur browser .. any firewall for that ip ..

This post has been edited by kek_ceklat: Apr 14 2009, 11:17 PM

my line got always problem with dsl blinking. tm staff wasnt help much indeed

what problem? intermittent? try paste ur snr margin and attenuation here ..

SNR Margin:
Downstream - 0dB
Upstream - 6dB

Line Attenuation:
Downstream - 60dB
Upstream - 31dB

That bad? I just checked on my DSL-2540T router. I have extremely serious disconnecting problems. What should I do?

hmmm , lets see . normally , its ...

Modem Status

Link Status Connected
Us Rate (Kbps) 512
Ds Rate (Kbps) 1024

US Margin 14
DS Margin 5

DS Line Attenuation 60
US Line Attenuation 63

i called them , they say its my line ... need to wiring .

who do u call for wiring ? they say tmnet ppl wont do it for me .. hmmm


and sometimes when i m connected , this happens , i cant surf the net , but connection stated still connected , as below :


Modem Status

Link Status Connected
Us Rate (Kbps) 512
Ds Rate (Kbps) 1536

US Margin 15
DS Margin 2147483644 <----------- ????????

DS Line Attenuation 62
US Line Attenuation 63


thanks for the help .

Hi there need help here......there's a problem tat trouble me a long time ago....n tis problem is a bit weird

when i gonna play dota in some private server my line tempt to go dc sometimes suddenly......its lik after start the game for about 10min, my internet connection will go dc until i hav dc from the game then it will automatically connect back by himself after a while......

also there is a problem when sometimes there is a ppl call in also will make my internet line line go dc.....

the wireless router tat i am using is belkin g router....



n now there is even some new problem after i bring back my old PC and using the wireless g usb adapter for tis PC.....it will automatically go dc after about 15min lik tat n connect back by himself n then dc again after about 15min....

kindly help me if u can as i dunno wat to do with tis......



This post has been edited by GrandElf: May 27 2009, 10:10 AM

Thanks for the guide.
I just used it to troubleshoot my connection.

Hi all,
Hope for some guide here.
I am also a "at least until now" loyal TM customer.
I don't use the Billion modem that TM provide to me.
Instead I am using my cousin's Aztech USB Modem.

I tried to check the connection status at 10.0.0.2.
But I can't see any word "Margin" there.

I found only this:

Firmware Version: 29.2.3

ADSL Line Status: SHOWTIME
Downstream Data Rate: 2048kbps
Upstream Data Rate: 512kbps

PPP Connection Status: Connected
Protocol & Encapsulation Mode: PPPoE LLC
VPI/VCI: 0/35

What does this mean????

Please somebody help me..

which?

meaning ur modem had been configure properly in another..

malaysia using VPI/VCI: 0/35

What do U mean?
My internet connection is good or the other way?
I don't understand.
Sorry.

Any sifu's please correct if wrong. I'm still learning.