naw, he pointed out my mistake, and i apologize for that.

hmm, whats the temps?





student whack guru =_= mau mati ka, later i korek everything you say, siap engkau LOL

hahaha just kidding ;P

meh, but thx for pointing out mah mistake.





DFI - ABS = DFI Aku Brek Sendiri

kidding, its auto boost system, its basically pretuned/preset overclocking system with a lot of fail safe features, the downside is, its not the best.

First thing to do is, read and read

It would help if you listed the parts you have now, processor, psu, cooling, rams

my part is at my signature ler...

i have read a lot ultimate guides but just dont dare to try. thats y i asking for some little opinion.

cheers!!!

73degree under RealTemp

-pWs-

Bryan,joking lah,fun only
@pWs,mind to show bios template?Could be your gtl ref,vmch or PL?Let bryan have a look and maybe he can simulate your condition to help
Anyway,good job on 480FSB stability on quad

Nice oc @pws.. mind sharing your full setting? Wanna copy

hi all. here i having some question to ask here.
i'm a DFI blood iron user. the problem tat i facing now is,
i can't PUSH up my E8400 C0 steping more then 3.7GHZ or even 500X8@ 4ghz vcore up to 1.45v, orthos will fail in few second. here are my setup.

E8400 C0
2X1gb Team extreem D9GMH
560Watt Strider Silverstone

is it i got some setting tat i miss,
please guide me. thank you.

no one could help?!

@gac
You might want to try OC your proc only while maintaining the same RAM default speed using divider. You might want to set yourself a target on how high you wish to OC your proc.

Q6600 G0(If its G0), should have no problem hitting 3.2Ghz, infact pretty much easy I would say. Then calculate what FSB you will need in conjunction with multiplier used to reach 3.2Ghz.

6x multi 533FSB
7x multi 457FSB
8x multi 400FSB
9x multi 355FSB

Best to play with is 8x multi, you will just need 400FSB which is easily archievable and using 1:1 divider, your RAM can run fine with 800Mhz CL5 with just 1.8v.

Also you will need some time for trial and testing how much vCore you will need to run stable at that speed. Normally Q66 @ 3.2Ghz is around 1.3v +/-. Don't forget to adjust GTL Ref value/vMCH as well.

Have fun.

---

Added on November 10, 2008, 11:28 am
Try set your vNB to 1.35v.

This post has been edited by Hyde`fK: Nov 10 2008, 11:28 AM

@Hyde`fK

even i set up to 1.41nb core also fail.
and those GLT i put 67 the the nb GLT i set it as 61.

i think mybe my processor got something wrong.
correct me if i'm wrong.

thank you... u make my day! i will try and then post here.

This post has been edited by gac: Nov 10 2008, 11:46 AM

445x9 1:1 can or not??Test that first

u mean 445X9 with default voltage? @1.25v?

i will try all default voltage first see how it goes

by the way, should i install the DFI-ABS?

No Vmch increase,will you run 445x9 setting stable??First thing first

u know wat i get.
the pc OUT blue screen when loading windows.
really dunno why.

Here is my setting stable at 480x7.5

-pWs-

Attached File(s)
 3604MHz_Overclocked_Setting.txt ( 5.08k ) Number of downloads: 15

erm...bro.... jsut wana ask, how far can ur proc go from stock voltage?

don't surprise when i tell u.
400X9 (3.6GHZ) max

well that is nothing to be surprised of.... some bad e8400 chip cant even get over 3.3ghz on stock vcore....

what is the value of ur stock vcore btw?

u have a few solution imho... check whether ur ram have problem or not by using memtest windows....

or u can try flash ur bios to a newer ones n see how it goes.... pls flash bios with care btw, make sure u load ur optimised default bios before flahsing.... there are guides on dfi official webby

alamak double post

This post has been edited by uzairi: Nov 12 2008, 03:12 AM