Lowyat.NET Forums

Welcome Guest ( Log In | Register )

LYN wins Intel-Lenovo-Tangs Blogathon challenge. Thank you everybody!
52 Pages « < 16 17 18 19 20 > »  
 RSS feedBump TopicReply to this topicStart new topicStart Poll

Outline · [ Standard ] · Linear+

> Intel Q9xxx and Xeon 33x0 Family, Show the rest what Intel Quadies can do!

Share on | Track this topic | Email this topic | Print this topic
glock88
post Sep 14 2008, 08:50 PM
Show posts by this member only |This post's rating (0+, 0-) | Post #341


Casual
***

Group: Junior Member
Posts: 317
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Mar 2008
bro i think its normal temp for a quad... hmmmm that VID in coretemp doesnt show ur real Vcor... u must use CPU-Z or something else to see it rite?? coz from what i see.... VIDs dont change only vcore change...
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
OC4/3
post Sep 14 2008, 10:42 PM
Show posts by this member only |This post's rating (0+, 0-) | Post #342


Sub Zero Cooling FTW
*******

Group: Senior Member
Posts: 3,067
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Dec 2007
From: Heaven of OCer
QUOTE(owikh84 @ Sep 14 2008, 06:54 PM)
Yes, it's 1.175v as mentioned earlier.
But one thing I'm not happy with my core temp  sweat.gif  sweat.gif .
[attachmentid=592571]

Duno what's wrong. S1283 w/ SS kit & Tuniq TX-2 also cant help
Nothing's wrong with the installation, cable management & air flow  hmm.gif .
I think it's my hot room is the main factor.
*



Temp sensor problem icon_rolleyes.gif
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
owikh84
post Sep 14 2008, 11:05 PM
Show posts by this member only |This post's rating (0+, 0-) | Post #343


i7 Clan
*******

Group: Senior Member
Posts: 2,364
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Nov 2007
From: Butterworth, Penang - Kelantan (Hometown)
QUOTE(hilmiangah @ Sep 14 2008, 06:59 PM)
time for air conditioner it is kot.
*


Yes that's what I'm thinking of... rclxms.gif
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
tech_frix
post Sep 15 2008, 07:22 AM
Show posts by this member only |This post's rating (0+, 0-) | Post #344


Boo Yah!
*******

Group: Senior Member
Posts: 4,137
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Sep 2007
From: wheres d oil price is higher than condoms..
QUOTE(zer0hour @ Sep 14 2008, 06:27 PM)
Glock - it's very subjective. One processor may be able to do 443 at 1.175v, another not. Try tweaking your GTL refs, Vmch and Vtt.

Tech - what don't you understand? Too broad la your question =p
*



where's d DDR2 voltage??
i could oni find DDR... doh.gif doh.gif
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
zer0hour
post Sep 15 2008, 05:30 PM
Show posts by this member only |This post's rating (0+, 0-) | Post #345


Unlike Any Other
******

Group: Senior Member
Posts: 1,804
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Jun 2008
DDR is DDR2 voltage la..Your board only supports DDR2 wat =p
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
manutd #1 fan
post Sep 15 2008, 05:35 PM
Show posts by this member only |This post's rating (0+, 0-) | Post #346


Getting Started
**

Group: Junior Member
Posts: 111
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Feb 2005
urmmm... why core temp detect my VID as 1.2v not 1.175?
and why my CPU-Z detect L3 cache on my proc?
cry.gif too many errors...
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
owikh84
post Sep 15 2008, 06:56 PM
Show posts by this member only |This post's rating (0+, 0-) | Post #347


i7 Clan
*******

Group: Senior Member
Posts: 2,364
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Nov 2007
From: Butterworth, Penang - Kelantan (Hometown)
QUOTE(manutd #1 fan @ Sep 15 2008, 05:35 PM)
urmmm... why core temp detect my VID as 1.2v not 1.175?
and why my CPU-Z detect L3 cache on my proc?
cry.gif too many errors...
*


What version of CPU-Z ur using? Try the latest version 1.4.7 icon_rolleyes.gif
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
tech_frix
post Sep 15 2008, 10:06 PM
Show posts by this member only |This post's rating (0+, 0-) | Post #348


Boo Yah!
*******

Group: Senior Member
Posts: 4,137
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Sep 2007
From: wheres d oil price is higher than condoms..
QUOTE(zer0hour @ Sep 15 2008, 05:30 PM)
DDR is DDR2 voltage la..Your board only supports DDR2 wat =p
*



DDR Vdimm oni 1.8++ je...
i cant set my rams to 2.00v.... cry.gif cry.gif cry.gif
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
zer0hour
post Sep 15 2008, 10:13 PM
Show posts by this member only |This post's rating (0+, 0-) | Post #349


Unlike Any Other
******

Group: Senior Member
Posts: 1,804
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Jun 2008
Hmm that's not the case on my Tpower. When you enter Voltage Control under the O.N.E menu you should have the voltage setting page for all the different items like Vcore, Vdimm etc in +0.1 or +0.25 increments right?

Sorry for the slightly imprecise description, but the Tpower system is with my gf now - I took back my QX system haha. I do remember very clearly that it was possible to give my RAM pretty high voltage though - at least 6 increments of +0.1.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
tech_frix
post Sep 15 2008, 10:17 PM
Show posts by this member only |This post's rating (0+, 0-) | Post #350


Boo Yah!
*******

Group: Senior Member
Posts: 4,137
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Sep 2007
From: wheres d oil price is higher than condoms..
QUOTE(zer0hour @ Sep 15 2008, 10:13 PM)
Hmm that's not the case on my Tpower. When you enter Voltage Control under the O.N.E menu you should have the voltage setting page for all the different items like Vcore, Vdimm etc in +0.1 or +0.25 increments right?

Sorry for the slightly imprecise description, but the Tpower system is with my gf now - I took back my QX system haha. I do remember very clearly that it was possible to give my RAM pretty high voltage though - at least 6 increments of +0.1.
*



erm...
will try to look around summore...
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
zer0hour
post Sep 15 2008, 10:40 PM
Show posts by this member only |This post's rating (0+, 0-) | Post #351


Unlike Any Other
******

Group: Senior Member
Posts: 1,804
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Jun 2008
Yupz or take pictures of your BIOS Voltage Control page la. With those I can probably guide you better..
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
tech_frix
post Sep 15 2008, 10:58 PM
Show posts by this member only |This post's rating (0+, 0-) | Post #352


Boo Yah!
*******

Group: Senior Member
Posts: 4,137
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Sep 2007
From: wheres d oil price is higher than condoms..
QUOTE(zer0hour @ Sep 15 2008, 10:40 PM)
Yupz or take pictures of your BIOS Voltage Control page la. With those I can probably guide you better..
*



boss...
confirm 1.85 je.... cry.gif cry.gif cry.gif doh.gif
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
zer0hour
post Sep 15 2008, 11:00 PM
Show posts by this member only |This post's rating (0+, 0-) | Post #353


Unlike Any Other
******

Group: Senior Member
Posts: 1,804
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Jun 2008
Mmm very weird. What revision is your BIOS? Try flashing to latest maybe?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
tech_frix
post Sep 15 2008, 11:05 PM
Show posts by this member only |This post's rating (0+, 0-) | Post #354


Boo Yah!
*******

Group: Senior Member
Posts: 4,137
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Sep 2007
From: wheres d oil price is higher than condoms..
QUOTE(zer0hour @ Sep 15 2008, 11:00 PM)
Mmm very weird. What revision is your BIOS? Try flashing to latest maybe?
*



need to flash r??
using d software is it?? sweat.gif sweat.gif
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
zer0hour
post Sep 15 2008, 11:12 PM
Show posts by this member only |This post's rating (0+, 0-) | Post #355


Unlike Any Other
******

Group: Senior Member
Posts: 1,804
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Jun 2008
Ohh I got it la. These are the BIOS screenshots:
http://www.xtremesystems.org/forums/showthread.php?t=189234

The +1.85v you mention is -in addition- to the default voltage. So to set your Vdimm to 2.0, you set the Voltage Control to +0.2.

Default voltage 1.8+0.2 = 2.0 =p
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
tech_frix
post Sep 15 2008, 11:14 PM
Show posts by this member only |This post's rating (0+, 0-) | Post #356


Boo Yah!
*******

Group: Senior Member
Posts: 4,137
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Sep 2007
From: wheres d oil price is higher than condoms..
QUOTE(zer0hour @ Sep 15 2008, 11:12 PM)
Ohh I got it la. These are the BIOS screenshots:
http://www.xtremesystems.org/forums/showthread.php?t=189234

The +1.85v you mention is -in addition- to the default voltage. So to set your Vdimm to 2.0, you set the Voltage Control to +0.2.

Default voltage 1.8+0.2 = 2.0 =p
*



do i need to flash to latest bios??
now running @3ghz... doh.gif
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
zer0hour
post Sep 15 2008, 11:22 PM
Show posts by this member only |This post's rating (0+, 0-) | Post #357


Unlike Any Other
******

Group: Senior Member
Posts: 1,804
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Jun 2008
Nah just leave it. Flashing BIOS is pretty mafan.
Unless you very free and feel like doing it la =p
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
tech_frix
post Sep 15 2008, 11:25 PM
Show posts by this member only |This post's rating (0+, 0-) | Post #358


Boo Yah!
*******

Group: Senior Member
Posts: 4,137
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Sep 2007
From: wheres d oil price is higher than condoms..
QUOTE(zer0hour @ Sep 15 2008, 11:22 PM)
Nah just leave it. Flashing BIOS is pretty mafan.
Unless you very free and feel like doing it la =p
*



thanks boss....
now i understand it a bit more...
will tweak later... rclxm9.gif
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
tkh_1001
post Sep 15 2008, 11:30 PM
Show posts by this member only |This post's rating (0+, 0-) | Post #359


Newbie
*******

Group: Senior Member
Posts: 2,277
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Oct 2007
QUOTE(tech_frix @ Sep 15 2008, 11:14 PM)
do i need to flash to latest bios??
now running @3ghz... doh.gif
*


this guy got mobo flashing phobia edi tongue.gif

i still remember tongue.gif
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
zer0hour
post Sep 15 2008, 11:32 PM
Show posts by this member only |This post's rating (0+, 0-) | Post #360


Unlike Any Other
******

Group: Senior Member
Posts: 1,804
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Jun 2008
QUOTE(tech_frix @ Sep 15 2008, 11:25 PM)
thanks boss....
now i understand it a bit more...
will tweak later... rclxm9.gif
*



You're welcome..best of luck with it =p
tkh - Why does he have flashing phobia la? Destroyed a motherboard before?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
« Next Oldest · Overclockers United · Next Newest »
 

52 Pages « < 16 17 18 19 20 > » 
 Bump TopicReply to this topicTopic OptionsStart new topic
 



----debug section please ignore----
Lo-Fi Version Time is now: 24th November 2009 - 08:10 AM
All Rights Reserved 2003-2009 Vijandren Ramadass (~living on a prayer~)
Powered by Invision Power Board(Trial) © 2009  IPS, Inc.