Item(s): D.I.Y CaBLEs

Package includes: ~DePend 2 tHe PackaGe cHooSen~

Price:~ReaSonAbLE *BanK-iN to PBB @ RHB*

Warranty: ~2 WeeKS~

Dealing method: ~POsT LAju onLy~

Location of seller: S'GoR

Contact method/details: E-maIL: assassin_fantasy@yahoo.com

Age of item: NEw!!!

---

Item(s) conditions: GooD

Picture:


Reason for sale: ~StroNg ComMand iN MarKEt~

"Canare cable ' Canare connector "Belten cable " Neutrik connector" [size=7]
[color=orange]CAT 5E CABLE & CAT 6E CABLE


SUPRA audio cable
The advantages of Supra Nylon screened cables over ordinary braided cables are:

* Tensile Strength The tensile strength is 500N/50mm.
* Bending Fatique In accordance with a military flex test a cable must pass 30,000 bending cycles without damage. After 90,000 bending cycles the test of the Nylon screened Supra MBS was concluded without any damage to the cable.
* Environmental Immunity Air humidity does not influence the cable's electrical properties.
* Microphony The softness of the Nylon screen in combination with other design parameters makes a quiet cable, free from auto microphonics.

MBS Microphone Cable
Balanced

A non-compromise design, both mechanically and electrically. Negligable microphony, high noise rejection, low capacitance, high flexibility, high bending strength. The best mic and instrument cable.
Application examples: Microphone, guitar.

Tips and Tricks:
You can easily test the microphony of a cable: Plug the cable into the mixer with the other end of the cable open, without anything connected. Turn up the volume and listen to how sensitive the cable is when you touch it, tap it and move it, or slap it against a base floor, as occurs with mic/guitar cables.



Star Quad audio cable

~~~~~~~~~~~~~~~
L-4E6S
=====
The premier Star Quad cable for all handheld microphone applications. Flexible, satin smooth to the touch and extra strong, this standard diameter, 21 AWG cable fits perfectly in all XLR-type audio connectors. Forty separate strands in each conductor eliminate breakage due to flexing. Available in 10 beautiful matte finish color jackets.

L-2T2S
=====
Our standard diameter 2-conductor microphone cable for general purpose audio applications. The high density braided copper shield and two inner conductors (composed of 60 thin strands of copper wire), allow for maximum flexibility and reduced handling noise. A special compound PVC outer jacket resists cracking and tears even in sub-zero environments.

L-2B2AT
======
Canare's thinnest profile audio hookup wire. Amazingly flexible, with 100% foil shield, drain wire and PVC jacket that strips easily for rapid assembly. Suitable for large cable harness bundles, mixing consoles, tape machines and inner-rack wiring.

GS-6
====

A specially designed Oxygen Free Copper 18 AWG cable for connecting Guitar/Bass or Keyboards to amps, mixers, effects pedals and all outboard signal processing gear. Low capacitance and low series resistance provides improved frequency response (flat to 50kHz). A bright, ringing characteristic sound is preserved, even when using HI-Z guitar pickups with long cable runs. The proprietary double Carbon/Braid Copper shield construction eliminates microphonic handling noise, especially on stage where amps are often set at maximum volume levels. Also highly recommended for Amp Head to Speaker Cabinet leads.

DA-202
======

Mini version of DA206. 25 AWG conductors allow use with common IDC Punch Down Block, Digital Audio "110 ohm Type" Patchbays. Integral Drain Wire for easy ground wiring. Maximum recommended AES/EBU Length: 590ft (180meters). Jacket color: BLUE.

DA-206
======

Large OD for longest cable runs. Robust construction makes this cable a good choice for all Digital Pro Audio field recording. Maximum recommended AES/EBU Length: 1,180ft (360meters). Jacket color: BLUE.



LV-61S
=====
Canare's No.1 Selling Coax. A lightweight, very flexible RG59B/U equivalent that is perfect for all video facility equipment interfacing, ENG/OB work and video patch cord assemblies. Our smooth non-glare finish PVC jackets are available in 10 distinctive colors (including Chroma-Key Blue!) and will stay flexible even in sub-zero weather!

A2V1
====
For ENG/EFP/OB applications. Lightweight with a very thin profile OD of just .382 inch. Includes two 25 AWG balanced Audio lines (Canare L-2B2AT type twisted pair with foil shield and drain wire) plus a single 75 ohm Video Coax channel (Canare L-3C2V, featuring a PE dielectric with Solid Copper Center Conductor).


Analog Interconnect Cables
==================
We searched for the perfect analog interconnect cable, and none was better than the Canare Star Quad Model L-4E6S cable. Star Quad refers to the 4-conductor style construction that minimizes the loop area between twists of the conductors. According to Canare, this "double balanced" pairing reduces susceptibility to electromagnetically induced noise.
L-4E6S uses four 24 gauge annealed copper conductors, that when combined and soldered into the Canare F-09 RCA connectors, result in a pair of 21 Gauge balanced conductors. We ground the 95% braided copper shield to the "transmitting" end of the cable, for superior noise rejection. Other manufacturers mistakenly ground the shield to both connectors, resulting in two ground paths for the cable, and therefore a "ground loop" which causes noise.

Excellent frequency response is maintained due to the use of a special irradiated polyethylene insulation which provides a low capacitance dielectric. These cables not only excel in the home audio environment, but are superior to all mobile audio cables currently available. Each cable takes a full half-hour to build, due to the care and patience involved in stripping and soldering the wires to the RCA connectors, and that is why they are more costly than a crimped type coaxial cable. We use six of these cables on the ClearCables A/V reference theater setup for the DVD-Audio to receiver connections, and their performance is stunning.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
F09, f10, f12 ,f15, f16...............
APPLICATIONS:
=====================
* Guitar/Keyboard
* Sound Mixers
* PA Systems
* Test Probes
* Hi-Fi Interconnects

FEATURES:
========

* Robust, Dependable Construction
* Brass with Nickel/Gold Plating
* 360-degree Crimpable Cable Strain Relief
* Easy to Solder
* Beautiful, Long Lasting Finish

DESCRIPTION:
===========
Canare offers in-line cable mount audio plugs in a variety of configurations for the discriminating professional. Each model is carefully designed to accommodate small to large O.D. cables and all versions offer a generous soldering area for easy wiring assembly, good electromechanical characteristics, super performance and long life durability.

RCA CONNECTOR
============
Our Canare RCA connectors are top quality impedance matched 75 ohm nickel plated brass, with phosphor bronze gold and beryllium copper gold plated contacts, PPO Noryl dielectric material, and they have a usable bandwidth to 200 MHz. Other brands emphasize looks over function. Take a close look at the RCA connectors on the mass produced brands: You will often see a plastic cylinder, gold plated "death grip" end barrels, and a rubber gasket to prevent over tightening of the plastic barrel onto the connector. These cheaper plastic materials are used to save the manufacturer money. Some of our customers have reported breaking the RCA jacks on their equipment using these name brand cables because the RCA's have such a "kung-fu death grip". On the higher end lines of mass produced brands, you will have an all metal barrel construction, which is more durable, however, despite the luxurious look and feel of these connectors, they do not always have the proper electrical specifications: 75 Ohm impedance and low contact resistance. We use two Canare RCA connectors: Model RCAP C-77 on our coaxial terminations, and the Model F-09 solder type connector on our balanced interconnect cables, which require soldering.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Profi (NF2C-B/2)
============
Spring loaded ground contact: retractable element with separate wedge contacts which keeps the shell in the front position when engaged thus also providing a direct and strictly coaxial electrical connection from the socket via the shell to the cable shield. All metal design, machined brass, black ceated shell. Easy assembly and soldering (large soldering area, rapid-flow plating). High grade plastic insulator with high creep resistance.

NP2x,NP3X
========
The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch). The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip. The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.

NP2X
=====
2 pole 1/4" professional phone plug, nickel contacts, nickel shell

NP3X
3 pole 1/4" professional phone plug, nickel contacts, nickel shell

The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.

NC3FXX
======
3 pole female cable connector, Nickel housing, silver contacts

NC3MXX
======
3 pole male cable connector, Nickel housing, silver contacts
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
NYS Budget Series
============
===============
All metal, heavy duty phono plugs with cable clamp or chuck type strain relief as well as Phono receptacle for PCB mount
NYS352
======
Phono plug with nickel plated shell and contacts

NYS352G
======
Phono plug with gold plated contacts

NYS231
======
3.5 mm plug, 3-pole, metal housing with crimp strain relief

NYS226
======
3.5 mm plug, 2-pole, metal handle with crimp strain relief

NYS202
======
�" plug, 3-pole, short turned brass handle

NYS201
=====
�" plug, 2-pole, short turned brass handle

This post has been edited by assassin_fantasy: Oct 19 2008, 11:07 PM

Attached thumbnail(s)

Questions:
1. What cables you using? Usually.
2. What plugs(mini) you have? Other than Canare F-12.

i need a simple 3.5mm male to female extension cable...been looking for it for a few months d...appreciate it if u have it...

i need usb to 3.5 jack..my headphone is usb...wan to use for my hp..

sorry 4 late reply coz just come back from cny short break. Pls tell me what's the length of the cable u want?

dopod 838pro audio adapter..
can u make it?

usually what ppl do with ~CAT-5 CABLE~ cable???

i need a 10ft one 1/4" stereo TRS male to 2 - 1/4" mono male cable, better known as a y-cable. something like this one:
http://www.musiciansfriend.com/product/Hor...able?sku=336120

how much would that be? what cables & connectors do u use?

it's a network cable...

yes i know but for audio purposes what can u make from cat 5??? can make power cable ???

would like to hv 1 too.. make sure the jacks are not heavy. the current i'm using always pull my earpiece out of my ear. and i also i want a quality stuff.. last time i buy 1 used 2 weeks become only 1 sided.

i want a 0.6m length 1.. 3.5mm male to female.

let me know if u sell it. thx!

Do kindly include the THREAD TAGS and [WTB]/[WTS] tags when opening a thread. Failure to do so may result in immediate deletion of the particular thread.
*[WTS] = Want To Sell

hey there,

i need a 3.5mm jack to 3.5mm. About 1 feet. Any possibility you can make that for me?

PM me pls.

so happy to see all of u supporting my forum. thz
Cat 5 cable is actually a data cable that normally be used for data transfering purposes due to it's
amazing speed so that's y lots of ppl choose it as a speaker cable AFTER certain modification.
(I'm working out on CAT 6 now!!!)
My customer has used it as power cable 4 his HIFI system n it seems liked AC noise is
filtered. (This job is so HARD n LONG TIMES works )

Hi,

Any chance you have the Canare GS6 low capicitance cable? If yes, how much will yo ucharge for 15ft with neutrik 1/4" plugs (1 side straight and the other side-angled). Thanks.

BROTHER !!! ALREADY PM YOU !!
THANKS

Hi, didn't get any pm from u. Could you try email me instead? Thanks.

SORRY TO LATE REPLY ALL PM !!!!!

all pm already send out thank you all

---

Added on April 6, 2008, 8:39 pm

---

Added on April 6, 2008, 8:40 pm


sorry all my friend i'm very busy all pm i will reply at tuesday




This post has been edited by assassin_fantasy: Apr 6 2008, 08:40 PM

yeah2 whatever...

S750 speaker cable(four 3.5mm ports) to one port in used for W810(3.5mm )
got?