ooooh....

ic ic... totally underst00d now... hehe..

so i suppose any ram tat runs at pc5300 will run wif my current ram in dual channel mode?

Yes, u should choose that RAM spec according to what inside ur lappy have.

I realize that new version of V3000 have used 533 mhz also. Due to 667 mhz conflict previously.

I just upgrade 1gb 5300 667mhz ram into my lappy.. cool! it working like other expensive performance i can say. I bought kingston but same chips from Hynix!

never ever regret bought this model! value added for money! but need some technical effort to meet expensive performance!

hey friends, need some help here,
who knows how to set the num pad?

how to disable it??? mine show "no region selected"... Is that setting???

OK, here comes my problem.
I'm a bit disappointed with this nb.
Guess wat...the nb will never boot up with the battery inside! It will just hang there. I bought it last Friday night and never use battery until just now. Any idea wat i should do now?

Hello, the motherboard HT link speed is 400mhz with reference clock at 200mhz with HT multiplier at 2x........but i read at the nvidia site, their chipset support HT speed up to 800mhz. So, i have a few questions:-

a) is the 400mhz HT link reading is for one way.....means that the 2 way would be 400x2
= 800mhz or

b) the speed had been tuned down and it can be increase by increasing the multiplier to
4x, so that 4x200mhz = 800mhz?

Thanks.

have you charge your battery brfore using it?

hmmm... try to charge ur battery for at least 8 hours when u newly get ur laptop... i think it will solve the problem. if still persist...go to HP Service center and check

Charged overnight......should be enough kua.

BTW, who r using V3218TU? What battery model it is using? I found out the battery has only 10.8V while the notebook needs 18.5V

you need to download a software called LtnRPC...

may i know what's da different between compaq presario V32xx series and V31xx series ? Is it newer model ? newer processor ? or newer OS ?

Newer spec n newer OS

v32xx is v32xx replacement model. Not much different actually. Just the OS and keyboard changed.

both my ram is original from HP/COMPAQ. Same bus speed. 533Mhz but still not running dual channel. means non compatible?

my other lappie. DV6205 upgraded to 2 gm ram same brand,, YES,,,, running dual channel

here is my cooling pad...

Attached thumbnail(s)

dude... nice looking notebook cooler pad... how much i got it for?

RM65 at Sri Computer...u can place the cooling pad either way....if ur notebook is particular hot at lower part (like V3222)...u just turn it around....

---

Added on March 19, 2007, 7:40 pmany V3222 user here which the RAM can run in dual channel? mine cant....sad...

This post has been edited by rockdaman: Mar 19 2007, 07:40 PM

it suck air out, right?
when it turn around and the air flow will face you, and u can feel the air flow coming thru you, doesn't it feel uncomfortable?

yeah...sucking air out...but ur face wont be facing the hole what....it just blowing at ur hand...and u merely feel it...the real hot is where ur palm on top of the hardisk area...

i have one cooler before.. it's a cheap and no brand cooler.
the design are nearly same. three fans located the same as yours..
but it's a plastic made.
when i do the same as you.. the air flow out front of me..
As specially, when i'm in air condition room.
one fan located left suck the hot air out, another two are actually sucking the cool air out..
so when the air flow come out to me, my hand actually freezing.. lolz..
when i off my aircon, it's end up body hot and hand cool..

this technique of turning around the cooler are very effective of cooling down the temp, but i face the problem of causing my hand/arms freezing..
i rather take out the cooler instead of using it. hehe..