Hey guys i just bought a D-LINK DSL G604T 4 days back..very satisfied with it..upgraded to the latest firmware..all u guys out there using this modem support this thread n post up all links to the latest firmware dont forget to post yr coment about this modem

Malaysian Latest Firmware - http://www.dlink.com.sg/products/support.asp?pid=312 < To Support ADSL2/2+
Info About This Model - http://www.dlink.com.sg/products/dlhome.as...0&cid=2&pid=312



As For Now The D-LINK DSL G604T is Currently not avaible in the markets as its replaced by this model * DSL-2640T *
currently im using this model as for the my D-LINK DSL G604T was sent to RMA and and it return with this model

Latest Firmware - http://www.dlink.com.sg/products/support.a...id=501#firmware
Info About This Model - http://www.dlink.com.sg/products/dlhome.as...0&cid=2&pid=501

This post has been edited by dj2004: Nov 9 2007, 09:33 AM

I'm using this router too, very good response and easy to use. As for the firmware, make sure you don't download the wrong firmware.



Attached thumbnail(s)

im not sure if its the firmware or the wireless problem..

im kinda easy to get disconnect on the wireless connection while i play Warcraft online.
added the 7db antenna also same although the modem is just next room.

have u guys compare the old and new firmware? im still not update to the latest firmware yet..



This post has been edited by laichong: Nov 15 2006, 03:42 PM

yup true just make sure u download the Malaysian version im using it to..just upgraded it don have any probs

i suggest u upgrade it to the latest firmware and see how it goes ..how much u bought yr 7db antena kinda intrested in it?

lol .. could that be your wireless adapter problem ? and with your notebook or pc, how many access point you can scan ? Are they all in the same wireless channel bo ?

WEP enable ?

Try upgrade and you will see something new

dam man after long hour of downloadin bt i could not enter any web page..n i restarted the modem the adsl n wan light din come out..aihz..i reseted the modem n everything back to normal..anyone can tell me y this happened?

Wireless networks work both way.. having a 7db antenna on one end will not help it at all if the receiving end cannot acknowledge the signal with the reply... It could be due to other interference.. such as magnetic fields, microwave oven, or even if your wall is very thick..

beside that, check the channel, default is usually channel 6, I would suggest u change the channel to 1 or 11 as it has a smaller chance of interference with other signals...

and finally, if im not mistaken.. 802.11b cannot work effectively around walls.. so check your receiving end... make sure it is in 802.11 b + g mode..

This post has been edited by ray86: Nov 16 2006, 07:16 PM

hmm just upgraded to the latest version of firmware in http://www.dlink.com.sg/products/support.asp?pid=312 everything working normal..hope this one doesnt crash with long bt download

my dsl-g604t just died just nw..gonna send it back to rma tomm..haihz back to my aztech 600e

Me, me, me...i also got G604T..but running Australia ADSL2 firmware because malaysian firmware just released recently and i'm suffering from hang modem for a few months before that

Sometimes the wireless got on and off in a few seconds, quite annoying sometimes...

thats what i am facing now..... during mid game, suddenly off and on back again, makes me dc from the game server....
but after i maximized the DHCP lease time to 86400sec(24hr), it seldom dc already. but still it will on/off without warning


the 7db antenna coz around RM150, bought at MyPC lowyat. but it doesnt seems to work effectively. coz i have 1 PC in a room downstairs cant get the signal, it used D-Link USB wifi G adapter, i tested both 2db and 7db antenna also cannot , i need to move the modem outside only can get a "low" signal indication. 7db doesnt help much also.

IMO, D-Link's wireless router are pretty bad in most cases but their wired ones seems to be fine. I've read from somewhere in the internet that D-Link is aware of this problem but still couldn't find a solution to the problem.

i went to all-it to send my d-link for rma..aihz..hope d-link makes a good firmware for malaysia..do ya guys noe how long it would take for it to come back from rma cuz this aztech 600e suxs got it from tmnut cant even port forward after 1 hour downloadin bt my conection comes limited conection



how much does yr D-Link DI-624+ cost?..how much u bought it for?


whats yr signal strength?



saw one at all-it 8dbi for rm130..intrested in buying it..im gettin that one end of this month


Posts merged. Please do not post multiple times as it would make the topic messy - hardyboyz888

This post has been edited by hardyboyz888: Nov 17 2006, 07:38 PM

I bought my D-Link DI-624+ for RM270 that time. Now I just use it to act as a AP while my Linksys WRT54GS would be my main router and QoS is done from there too.

Full signal...

But my laptop is on B mode and router is multimode. And using WPA, didn't have that problem before when using WEP but i lazy want to switch back.

Because lately TMnuts giving me more DSL Out of sync problems more than my wireless on and off problem

i think u wanna upgrade yr firmware to the latest malaysian version n set it back to WEP cuz i for me i think its the best..i am also using WEP n don have such problems with dc and for the wirelesss adapter im using Aztech WL230 802.11B/G USB 2.0 recently bought it not bad and i think u should run on b+g mode then u wont have dc's

This post has been edited by dj2004: Nov 18 2006, 01:20 AM

G604T user here. I'm having the same on/off problem as above only thing is, i'm connected thru network card not wireless. Xfire, YM will dc for for no reason but few second later its back to normal. Very frustrating when you in the middle of playing online games. I have upgraded the right firmware. I'll give the 86400sec tip a try.

Hi guys,

How is your day?

I need some help from yours.
I just bought the D-Link DSL-G604T router modem, but i fial to dial up to streamyx. any one can give me the idea to solve this probelm?

I follow the installation guide to setup the router and try to dial up to streamyx with the dial up setting provide in the streamyx installa CD.

Even i munually setup the new dial up from WindowXP also not working.. Any idea?

One more thing, my laptop cant detect the wireless from the router..... any idea?

Router status light is blinking, ASDL light is steady, laptop connect with LAN cable is working. Direct conect the phone line to Wall Jack also cant dial up.

Always showing "Phone line busy"

thanks in advance

Regards
ssyangloo