Can anyone help to see my minidump? It's in page 3. Thanks

It seems like memory related problem more than motherboard problem. Anyhow, have you tried to use single/double channel RAM configuration and changing your RAM timing from 1T to 2T?

Refer to your motherboard manual for RAM configuration.

Memtest sometimes failed to detect error proper especially related to power fluctuation under normal use.

Oh ya, your Windows need to be updated to the latest service packs and patches.

Hopes it'll help...



Few questions,

1. How many devices you have connected to your USB port as it seems snppro.sys caused your system USB device driver to crash?

2. Your system crashes only when you're using the webcam?

3. Can list out your system spec?

Hopes it'll help...



From just one minidump file, it could be mostly hardware related problem. It's best to attach around 5 or 6 of your latest minidump files for better analysis.

Is it possible to list out your system spec as I saw some pretty old driver still running in your system.

Hopes it'll help...

This post has been edited by tthm: Dec 14 2006, 09:11 AM

erm i don't have many devices plugged in and yes, my webcam is plugged in but rarely used..

when I use only 1 stick, its fine.
havent try 2T yet.
could it be over-burning problem?
I mean overclocking with too much volt? because previous I was running it with 2.9v 24/7, recently use back 2.8. but still I'm unsure ...
so most probably I'll have to RMA it lo? =|

Try to unplug unnecessary devices from your USB especially your webcam as your system crash was caused by the webcam driver.

Then you'll need to monitor the situation for some time.


You could try to use single or double channel RAM configuration to test.

Overvoltage or undervoltage are able to cause such error as well. Try to play around your RAM timing, it might help.

Hopes it'll help...

thanks a lot

will try it
thanks for the info,
and the worse condition is I might need to RMA my ram right?

sorry noob here. im having this problem too. but i cant locate my minidump files. ive d/l win debugger but cant open minidump files. i searched for it already but it says that it cant locate the file.

C:\Windows\Minidump --- still cant locate it !
run --- %SystemRoot%\Minidump ---- still the same !

so how am i going to attach my minidump file ??

This post has been edited by b0bba: Dec 16 2006, 11:43 PM

Can anyone help me pls??
Attached here is the minidump file.

Link here is my history: http://forum.lowyat.net/topic/383847


Thanks for your attention

Attached File(s)
 minidump.zip ( 161.07k ) Number of downloads: 21

STOP: 0x0000008E (0x00000092, 0XB1BEE946, 0XF78A2E1C, 0X00000000)

sorry guys i have no idea how to do all those testing =.= and i got frustrated, can u guys help me instead ? thnx alot

DELL laptop M65 having BSOD randomly.

Error Log File:

Server=watson.microsoft.com
UI LCID=1033
Flags=1696082
Brand=WINDOWS
TitleName=Microsoft Windows
DigPidRegPath=HKLM\Software\Microsoft\Windows NT\CurrentVersion\DigitalProductId
ErrorText=A log of this error has been created.
HeaderText=The system has recovered from a serious error.
Stage2URL=
Stage2URL=/dw/bluetwo.asp?BCCode=100000d1&BCP1=0A736E61&BCP2=00000002&BCP3=00000008&BCP4=0A736E61&OSVer=5_1_2600&SP=2_0&Product=256_1
DataFiles=c:\temp\WER732f.dir00\Mini122606-01.dmp|c:\temp\WER732f.dir00\sysdata.xml
ErrorSubPath=blue
DirectoryDelete=c:\temp\WER732f.dir00


what could cause the problem?

This post has been edited by oicicic: Dec 28 2006, 03:50 PM

Attached File(s)
 Mini122606_01.zip ( 19.08k ) Number of downloads: 9

my computer keep restarting and i dun get any window error... anyone know what is my problem.. ?

this is my bsod screen any clue ?

http://aycu15.webshots.com/image/8854/2001...90328673_rs.jpg

This post has been edited by samliang: Dec 29 2006, 12:21 AM

Here is a small story of mine,
Over past few months ago, my computer keep on restarting and sometimes, shut down.My seniors, friends, myself have been reformatted it, but same problem still remain unsolved. Then I sent to the shop(ATT:This shop is notorious with bad computer service one!!!) where I had bought it, claiming for warranty. The technician said that it was not reformatted properly, then the shop charge me RM 30 for reformatting. However the same problem reoccurred again after 2 weeks. Then I sent it to a computer shop with good reputation for hardware troubleshooting. The result came out, the RAM is OK, but both mainboard and hard disk got error. After paying RM 10 for service charge, I sent my CPU back to the shop where I had bought the CPU, claiming warranty for second time.Then the technician said that it was because of not properly reformatted again.... " However, when I called to the shop, asking the shop to check properly, then the technician changed his statement, claiming that my mainboard got error and had been sent for warranty. Then I ask him whether my hard disk got problem or not. He said " Saya rasa hard disk tak ada masalah" translated ( I THINK your hard disk doesnt has any problem) He claimed that it might not has any problem without even checking it!!!! Then I requested has my hard disk checked. Then he told me my hard disk doesn't has any problem... I feel like the shop is not reliable. How should I do? Anyone can help me? Trouble shoot my hard disk myself??

I've been having these BSODs recently and was wonder what was wrong and how could I rectify the problem. Please advice.

Attached File(s)
 Minidump.zip ( 267.05k ) Number of downloads: 18

Also having problems with BSOD. If anyone would be so kind to help me solve this problem, I'll love you long time.





Attached File(s)
 minidump.zip ( 167.88k ) Number of downloads: 14

help, my pc now have the problem
page_fault_in_nonpaged_area
stop: 0x00000050 (0xC57E38D, 0x00000001, 0xF756E94C, 0x00000000)
and found out that there are 2 file which is classpnp.sys and partmgr.sys got problems.
right now i still facing this kind of problem
thx in advance

DOUBLE POST! --> taken from my post in thread "BSOD in Shutdown"

COMPAQ V3133AU --> my lappy is a new one.. and i like to hibernate instead of shuting down d whole system.. suddenly one day.. i switch on d lappy and the system cant startup..

usually after switch on the computer that in hibernate mode.. Windows would actually resuming the system.. but after 100% resuming... then BSOD popuped (stated that BAD_POOL_CALLER) and restarting..

then i have to choose 2 option either to delete the restoration file and start the Windows or continue restart the sytem (means that resuming again).. then system wil start normally after i chuz to delete the restoration file... but my lappy keep fail to restart in hibernation mode..

at first i'm afraid that my hardware facing some problems.. but i'm sure that they're still new and working perfectly.. so then i try to restore my system using Windows System Restore.. and taaaddaaaa!! the problems solved! now i can hibernate and restart perfectly.. (then i realize in Event Viewer.. i got alots of Error for my AMDK8.. izzit related to the driver?)



but what's plays on my mind is.. how could the BSOD with error message of BAD_POOL_CALLER come out? (can some expert explain bout this problem)

my fren, that is a typical cheat method used..one time my friend who knows nothing about pc got charged rm150 for replacing a faulty fdd (something got stuck inside)..enuf of the swindling technicians.

if u r interested in conforming ur hdd is not the problem, kindly pm me

kanethesun, last time when i had faulty ram sticks, i cannot defrag my hdd..the dfragmentation wont finish..when i stick in new rams, the system immediately corrected many errors in my hdd during boot-up



samliang, i think u should try uninstall ur built-in sound card, and disable it in bios..

all-in-all, google is always ur best fren..