will it be fast enough for notebook 3 ram in vista operation system

what difference if i use 1gb x 2 & 2gb ram?

Usually no different, mayb the 2gb can help u save up 1 slot compare to ur 1gb X2 but it all depends on ur mobo support it or not.

if ur mobo support only single channel.. then u better get 1 piece 2gb. but usually single or double the 1 piece 2gb is still better

i want to ask
im using 4gb kingston hyperx 1066mhz
but my mobo only detect that ram was 800mhz only
how to set
should i set the voltage also?

Check ur Mobo chipset via CPU-z then the rest will help on that coz it might due to the limitation of it instead of ur RAM.

if i want to oc my proc toward 4ghz...which ram is the best and most cheapest?

is it value ram of 1066mhz or 800mhz overclocking ram?

super duper great information. thanks for sharing

i have ddr2 ECC PC800MHZ RAM FOR 2GB Only RM100

i just buy one 2G Corsair Gaming Memory from lowyat saturday to upgrade my toshiba L300-P502 notebook
Corsair Gaming Memory detail
http://www.corsair.com/products/gaming_memory/default.aspx

Performance Information and Tools, Result from vista sp2

System
) Manufacturer TOSHIBA
) Model Satellite L300
) Total amount of system memory 2.00 GB RAM
) System type 32-bit operating system
) Number of processor cores 2
) 64-bit capable Yes



Before

Processor Pentium® Dual-Core CPU T4200 @ 2.00GHz =4.9
Memory (RAM) 2.00 GB =4.9
Graphics Mobile Intel® 4 Series Express Chipset Family =4.1
Gaming graphics 829 MB Total available graphics memory =3.8
Primary hard disk 90GB Free (123GB Total) =5.3

Module 1 DDR2, PC2-6400 (400 MHz), 1024 MBytes, Hyundai Electronics
Module 2 DDR2, PC2-6400 (400 MHz), 1024 MBytes, Samsung


After
Processor Pentium® Dual-Core CPU T4200 @ 2.00GHz= 4.9
Memory (RAM) 3.00 GB =5.3
Graphics Mobile Intel® 4 Series Express Chipset Family=4.1
Gaming graphics 1341 MB Total available graphics memory =3.8
Primary hard disk 88GB Free (123GB Total) =5.3

Module 1 DDR2, PC2-6400 (400 MHz), 1024 MBytes, Hyundai Electronics
Module 2 DDR2, PC2-6400 (400 MHz), 2048 MBytes, Corsair
--
After add 2 DDR2, PC2-6400 (400 MHz), 2048 MBytes, Corsair
Module 1 DDR2, PC2-6400 (400 MHz), 2048 MBytes, Corsair
Module 2 DDR2, PC2-6400 (400 MHz), 2048 MBytes, Corsair

Vista 32bit and BIOS can detect 4G ram

This post has been edited by island: Jun 26 2009, 10:38 PM

what is the difference between 1066 mhz and 1067 mhz ddr3 notebook ram????
It is possible to use 1 x 2gb 1066mhz + 1 x 2gb 1067mhz together???

beside the 1 mhz difference.. both are the same.. its just within the margin of error.

but standards wise.. the 1067mhz stick should be labelled as 1066mhz ddr3

but even if they both wer to be paired together, the 1067 speed will be lowered to 1066 to match with the 1066 ram.

aiyer..... not good lor like that?? XD
how come 1067 damn hard to find want leh????

It doesn't make any difference.

both of them will work find based on the SPD settings presetted within those DIMM..

the 1mhz difference is nothing.. if you take into variance of the clockgen

haha ya, at the speed 1067, the 1 is really small. just a fraction of 0.001

Hi,
i'm a total newbie when it comes to ram upgrades.
can't trust myself in upgrading the thing on my own..

i'm currently using 1gb DDR2 SDRAM on my Toshiba satellite laptop..

just wondering, how much would it cost me to upgrade to a 2gb ram?

any chance i should go with the full 4gb capacity my laptop has to offer?

thanks!

3gb of Ram is enough unless you are using 64bit OS.

http://i4memory.com/f67/crucial-pc2-8500-b...ff-center-4218/







This post has been edited by cinbao: Aug 1 2009, 07:15 AM