Lowyat.NET Forums

Welcome Guest ( Log In | Register )

LYN wins Intel-Lenovo-Tangs Blogathon challenge. Thank you everybody!
136 Pages  1 2 3 > »  
 RSS feedBump TopicReply to this topicStart new topicStart Poll

Outline · [ Standard ] · Linear+

> Aztech DSL600/605/E/EU/EW/ER Users' Club, All your Aztech DSL600/605 Series Stuff (Router Configuration)

Share on | Track this topic | Email this topic | Print this topic
<giaNt>
post Jan 7 2005, 02:37 PM
Show posts by this member only |This post's rating (0+, 0-) | Post #1


Casual
***

Group: Junior Member
Posts: 397
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Sep 2004
From: Cheras, KL
Due to the fact that I have received numerous PMs asking the port forwarding configuration for Aztech DSL600E/EU/EW, here you go with the guide.
>> Link <<

Though the link shown is Dlink modem, but our modem/routers is 99% similar to it. And keep in mind that for BitTorrent, the ports that are required to open are: 6881 ~ 6889. If you are using BitComet, do pay attention to your listen port. It's far more important than the generic 6881 ~ 6889.

user posted image

I do apologise for not keeping up with this thread.

Old post
» Click to show Spoiler - click again to hide... «



This post has been edited by <giaNt>: Apr 11 2007, 12:46 PM
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
bsl555
post Jan 7 2005, 02:40 PM
Show posts by this member only |This post's rating (0+, 0-) | Post #2


Defunct
*******

Group: Senior Member
Posts: 6,637
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Jan 2003
Wahh.. 115 only ahh.. I bought at 155 last month..dang!..
there's actually a firmware upgrade on the ftp site but it's not as straightforward flash. The zip file (6mb) contains so many different image files.. I managed to find the right one and flashed it in..so far so good. But since me using as in bridge mode, I don't know what improvements or corrections over the previous version.
Aztech ftp site very screwy.. most of the time cannot access..if can, you're lucky lah!

This post has been edited by bsl555: Jan 7 2005, 02:57 PM
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
p4r4k3y
post Jan 7 2005, 03:01 PM
Show posts by this member only |This post's rating (0+, 0-) | Post #3


Newbie
*

Group: Junior Member
Posts: 6
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Jan 2005
Mr Giant -

You start a club for 600EU users. That is good. thumbup.gif

What does your club offer? biggrin.gif Free Membership?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
bsl555
post Jan 7 2005, 03:17 PM
Show posts by this member only |This post's rating (0+, 0-) | Post #4


Defunct
*******

Group: Senior Member
Posts: 6,637
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Jan 2003
QUOTE(p4r4k3y @ Jan 7 2005, 03:01 PM)
Mr Giant -

You start a club for 600EU users. That is good.  thumbup.gif

What does your club offer?  biggrin.gif  Free Membership?
*



Hiya.. your membership at LYN already FOC lah.
I'm sure rants and friendly banter about the Aztech 600EU welcome here.
Cheers! thumbup.gif
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
<giaNt>
post Jan 7 2005, 05:11 PM
Show posts by this member only |This post's rating (0+, 0-) | Post #5


Casual
***

Group: Junior Member
Posts: 397
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Sep 2004
From: Cheras, KL
QUOTE(bsl555 @ Jan 7 2005, 02:40 PM)
Wahh.. 115 only ahh.. I bought at 155 last month..dang!..
Yeah, it was really a good buy....It's cheap because I subscribed to Streamyx and has RM50 rebate. Moreover, the reseller gave me a Lantech LAN card for free coz they say my phone number is not on the waiting list.

However, can anyone please tell me if there IS really a problem with DSL600EU's 'Custom Rules' in Port Forwarding? Previously, I encounter this problem in my work place also, same modem....My job required me to use the Custom Rules to open port for web server....And the modem went dead after that time....Now it's my own!! Ooooo...I shud have already realised then!
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Berserker
post Jan 7 2005, 06:18 PM
Show posts by this member only |This post's rating (0+, 0-) | Post #6


i'm lovin' it
******

Group: Senior Member
Posts: 1,875
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Jan 2003
From: Kuching, Sarawak
I never use the custom rules. The basic rules work fine for BT and other apps..
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
streamyxuser
post Jan 7 2005, 09:46 PM
Show posts by this member only |This post's rating (0+, 0-) | Post #7


Getting Started
**

Group: Junior Member
Posts: 161
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Dec 2004
deleted

This post has been edited by streamyxuser: Jan 8 2005, 11:18 AM
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
LOvebugs
post Jan 7 2005, 09:51 PM
Show posts by this member only |This post's rating (0+, 0-) | Post #8


wOot ~
******

Group: Senior Member
Posts: 1,068
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Jan 2003
From: Kay Elle
i have no idea about port forwarding @_@ i guess it didn't work well on my side, even though the ports has been forwarded as showed on guide
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
IxCraZee
post Jan 7 2005, 10:04 PM
Show posts by this member only |This post's rating (0+, 0-) | Post #9


Newbie
*

Group: Junior Member
Posts: 8
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Dec 2004
Hi guys, Im new user and just bought an Aztech 600EU. But, I don know how to set ip up so that I can access Internet by usign Streamyx... so sad.. I knew that we need to set the DNS, but where to set? Any other settings? If yes, where to set them?

Could anyone show me the detail steps to set the modem? Thanks a lot and I realyl really appreciate any help from you guys...
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
darkages
post Jan 7 2005, 10:11 PM
Show posts by this member only |This post's rating (0+, 0-) | Post #10


Snake & Ladder
Group Icon

Group: Moderator
Posts: 3,906
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Jan 2003
From: Subang USJ
QUOTE(<giaNt> @ Jan 7 2005, 05:11 PM)
Yeah, it was really a good buy....It's cheap because I subscribed to Streamyx and has RM50 rebate. Moreover, the reseller gave me a Lantech LAN card for free coz they say my phone number is not on the waiting list.

However, can anyone please tell me if there IS really a problem with DSL600EU's 'Custom Rules' in Port Forwarding? Previously, I encounter this problem in my work place also, same modem....My job required me to use the Custom Rules to open port for web server....And the modem went dead after that time....Now it's my own!! Ooooo...I shud have already realised then!
*



Yes...there is a stupid problem with the firmware with this modem. And i have changed the modem twice because i tried to modify the Portforward IP to 192.168.0.1 and the whole thing KONG once i SAVE it....Reset button never revive the modem.....

Luckily im using a wireless router and i just need to do my port forwarding in my router...and Bittorent download speed ~~Zooooooommmm...

This modem is good though..speed very stable...not hot also,as im 24/7 online...


QUOTE(IxCraZee @ Jan 7 2005, 10:04 PM)
Hi guys, Im new user and just bought an Aztech 600EU. But, I don know how to set ip up so that I can access Internet by usign Streamyx... so sad.. I knew that we need to set the DNS, but where to set? Any other settings? If yes, where to set them?

Could anyone show me the detail steps to set the modem? Thanks a lot and I realyl really appreciate any help from you guys...
*



Yes...u need to manually set your DNS in your LAN(TCP/IP)-->i assume u know how to get here..

Then..set these
IP address: 192.168.1.2
Subnetmask: 255.255.255.0
Default Gateway: 192.168.1.1

Prefered DNS: 202.188.0.133
Alternate DNS: 202.188.1.5

This post has been edited by darkages: Jan 7 2005, 10:14 PM
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
streamyxuser
post Jan 7 2005, 10:26 PM
Show posts by this member only |This post's rating (0+, 0-) | Post #11


Getting Started
**

Group: Junior Member
Posts: 161
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Dec 2004
deleted

This post has been edited by streamyxuser: Jan 8 2005, 11:19 AM
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
darkages
post Jan 7 2005, 10:40 PM
Show posts by this member only |This post's rating (0+, 0-) | Post #12


Snake & Ladder
Group Icon

Group: Moderator
Posts: 3,906
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Jan 2003
From: Subang USJ
QUOTE(streamyxuser @ Jan 7 2005, 10:26 PM)
Why would you want to flash the firmware if you're using as a bridge modem?

The flash might invalidate ur warranty.
*



but the retail staff wont check the modem also..
i brought the modem back twice..giving same excuse..'Reset button not working,cant reset settings' the guy just change it no question ask..
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
streamyxuser
post Jan 7 2005, 11:06 PM
Show posts by this member only |This post's rating (0+, 0-) | Post #13


Getting Started
**

Group: Junior Member
Posts: 161
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Dec 2004
deleted

This post has been edited by streamyxuser: Jan 8 2005, 11:19 AM
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
streamyxuser
post Jan 7 2005, 11:28 PM
Show posts by this member only |This post's rating (0+, 0-) | Post #14


Getting Started
**

Group: Junior Member
Posts: 161
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Dec 2004
deleted

This post has been edited by streamyxuser: Jan 8 2005, 11:20 AM
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
streamyxuser
post Jan 7 2005, 11:42 PM
Show posts by this member only |This post's rating (0+, 0-) | Post #15


Getting Started
**

Group: Junior Member
Posts: 161
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Dec 2004
deleted

This post has been edited by streamyxuser: Jan 8 2005, 11:22 AM
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
InSplre
post Jan 8 2005, 08:35 AM
Show posts by this member only |This post's rating (0+, 0-) | Post #16


Look at all my stars!!
*******

Group: Senior Member
Posts: 2,634
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Jan 2003
From: kat situ kat sana
QUOTE(bsl555 @ Jan 7 2005, 02:40 PM)
Wahh.. 115 only ahh.. I bought at 155 last month..dang!..
there's actually a firmware upgrade on the ftp site but it's not as straightforward flash. The zip file (6mb) contains so many different image files.. I managed to find the right one and flashed it in..so far so good. But since me using as in bridge mode, I don't know what improvements or corrections over the previous version.
Aztech ftp site very screwy.. most of the time cannot access..if can, you're lucky lah!
*


where is the firmware?i cant find it
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
streamyxuser
post Jan 8 2005, 09:09 AM
Show posts by this member only |This post's rating (0+, 0-) | Post #17


Getting Started
**

Group: Junior Member
Posts: 161
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Dec 2004
deleted

This post has been edited by streamyxuser: Jan 8 2005, 11:20 AM
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
<giaNt>
post Jan 8 2005, 10:41 AM
Show posts by this member only |This post's rating (0+, 0-) | Post #18


Casual
***

Group: Junior Member
Posts: 397
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Sep 2004
From: Cheras, KL
QUOTE(streamyxuser @ Jan 7 2005, 09:46 PM)
No offence. I believe it's more likelya user problem rather than a modem issue.

Many users of 600EU have successfully port forwarded for BT usage.

Pls outlline the steps u undertook in attempting port forwarding on 600EU.
*



If this modem will crash if we do something wrong, then THERE IS problem with this modem. I already had the same fate on this modem twice! BTW, I called Aztech and they told me they will only have stock again 2 weeks later...and I ain't gonna use it as a router, gonna brigde it.

Anyone here have backup modems? Is it a good idea to have 2 modems so that we can have redundancy?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
matt_rix
post Jan 8 2005, 11:32 AM
Show posts by this member only |This post's rating (0+, 0-) | Post #19


!!mugoruDDin!!
******

Group: Senior Member
Posts: 1,158
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Nov 2004
you want to port forward for what? don't use custom rules. just click user and then click new.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
IxCraZee
post Jan 8 2005, 12:25 PM
Show posts by this member only |This post's rating (0+, 0-) | Post #20


Newbie
*

Group: Junior Member
Posts: 8
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Dec 2004
Hi darkages,

Thanks for your info...I can get oline already...
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
« Next Oldest · Networking Tech Support · Next Newest »
 

136 Pages  1 2 3 > » 
 Bump TopicReply to this topicTopic OptionsStart new topic
 



----debug section please ignore----
Lo-Fi Version Time is now: 22nd November 2009 - 09:10 AM
All Rights Reserved 2003-2009 Vijandren Ramadass (~living on a prayer~)
Powered by Invision Power Board(Trial) © 2009  IPS, Inc.