hi all, got my rig running and just install cpuid temp monitor.
i'm pretty curios with these two temps, what r they and should they be that high.
it fluctuates from 0 - 64c
i didnt oc this rig yet, everything still stock.
any explanation guys
here the report without the dump:

CPUID HWMonitor Report
-------------------------------------------------------------------------

Binaries
-------------------------------------------------------------------------

HWMonitor version 1.1.7.0

Monitoring
-------------------------------------------------------------------------

Mainboard Model Z68 Extreme4 Gen3 (0x00000563 - 0x4F84A030)

LPCIO
-------------------------------------------------------------------------

LPCIO Vendor Nuvoton
LPCIO Model NCT6776
LPCIO Vendor ID 0x5CA3
LPCIO Chip ID 0xC3
LPCIO Revision ID 0x33
Config Mode I/O address 0x2E
Config Mode LDN 0xB
Config Mode registers
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00 FF FF 00 FF FF FF FF 0B FF FF FF FF FF FF FF FF
10 FF FF FF FF FF FF FF FF FF FF F8 0E 00 00 FF FF
20 C3 33 FF 00 5C 00 00 D0 00 FF 62 00 80 00 00 01
30 E1 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
40 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
50 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
60 02 90 00 00 FF FF FF FF FF FF FF FF FF FF FF FF
70 00 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Register space LPC, base address = 0x0290


Hardware Monitors
-------------------------------------------------------------------------

Hardware monitor Nuvoton NCT6776
Voltage 0 1.02 Volts [0x7F] (CPU VCORE)
Voltage 1 1.82 Volts [0xE4] (VIN1)
Voltage 2 3.31 Volts [0xCF] (AVCC)
Voltage 3 3.31 Volts [0xCF] (3VCC)
Voltage 4 1.02 Volts [0x80] (VIN4)
Voltage 5 1.70 Volts [0xD5] (VIN5)
Voltage 6 1.10 Volts [0x8A] (VIN6)
Temperature 0 37°C (98°F) [0x25] (SYSTIN)
Temperature 1 64°C (147°F) [0x80] (CPUTIN)
Temperature 2 64°C (147°F) [0x80] (AUXTIN)
Fan 0 164 RPM [0xA4] (SYSFANIN)
Fan 1 236 RPM [0xEC] (CPUFANIN)
Fan 2 164 RPM [0xA4] (AUXFANIN0)
Fan 3 164 RPM [0xA4] (AUXFANIN1)
Fan 4 164 RPM [0xA4] (AUXFANIN2)
Register space LPC, base address = 0x0290

00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00 04 FF 04 A2 00 FF FF FF FF FF FF FF FF FF FF FF
10 04 FF 00 00 00 00 FF FF 40 00 00 00 00 85 00 00
20 7F E4 CF CF 80 D5 8A 25 FF FF FF DA 00 00 00 00
30 00 00 00 00 00 00 00 00 00 00 00 FF FF FF FF FF
40 03 DE 5F FF FF 80 3F FF 2D FF FF FF 18 05 00 A3
50 FF FF FF FF FF FF FF FF C1 FF FF FF FF 00 00 FF
60 A2 FF FF FF FF 01 00 FF FF FF FF FF FF FF FF FF
70 00 0A 00 25 80 24 00 16 80 FF FF FF FF FF FF FF
80 FF 03 1F 0F FF 3C 3C 3C 00 00 00 00 00 00 00 00
90 0A 00 00 00 00 0A 0A 0A 0A AA EF 80 FF 40 46 C4
A0 0E 01 00 00 FF 00 00 FF 00 00 80 66 66 06 01 01
B0 00 00 00 00 00 00 36 00 1C 00 00 34 28 40 C4 FF
C0 01 00 00 00 00 00 00 00 00 07 06 FF FF FF FF FF
D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

Hardware monitor AMD ADL
Voltage 0 1.10 Volts [0x44C] (VIN0)
Temperature 0 58°C (135°F) [0x39] (TMPIN0)


Processors
-------------------------------------------------------------------------

Number of processors 1
Number of threads 4

APICs
-------------------------------------------------------------------------

Processor 0
-- Core 0
-- Thread 0 0
-- Core 1
-- Thread 0 2
-- Core 2
-- Thread 0 4
-- Core 3
-- Thread 0 6

Processors Information
-------------------------------------------------------------------------

Processor 1 ID = 0
Number of cores 4 (max 8)
Number of threads 4 (max 16)
Name Intel Core i5 2500K
Codename Sandy Bridge
Specification Intel® Core™ i5-2500K CPU @ 3.30GHz
Package (platform ID) Socket 1155 LGA (0x1)
CPUID 6.A.7
Extended CPUID 6.2A
Core Stepping D2
Technology 32 nm
Core Speed 2693.6 MHz
Multiplier x FSB 27.0 x 99.8 MHz
Stock frequency 3300 MHz
Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, EM64T, VT-x, AES, AVX
L1 Data cache 4 x 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache 4 x 32 KBytes, 8-way set associative, 64-byte line size
L2 cache 4 x 256 KBytes, 8-way set associative, 64-byte line size
L3 cache 6 MBytes, 12-way set associative, 64-byte line size
FID/VID Control yes

Turbo Mode supported, enabled
Max non-turbo ratio 33x
Max turbo ratio 37x
Max efficiency ratio 16x

---

Added on November 23, 2011, 10:41 pmerrr, nobody?

This post has been edited by jsshay: Nov 23 2011, 10:41 PM

CPUTIN - CPU Temperature Info

To Compare Result Can Check Your BIOS Also

i got aida64 and it show:

Sensor Properties:
Sensor Type Nuvoton NCT6776F (ISA 290h)
GPU Sensor Type Diode, Volterra VT1556 (ATI-Diode, 70h)
Motherboard Name ASRock Z68 Extreme4 Gen3
Chassis Intrusion Detected Yes

Temperatures:
Motherboard 38 °C (100 °F)
CPU 33 °C (91 °F)
CPU Package 36 °C (97 °F)
CPU IA Cores 36 °C (97 °F)
CPU GT Cores 35 °C (95 °F)
CPU #1 / Core #1 34 °C (93 °F)
CPU #1 / Core #2 35 °C (95 °F)
CPU #1 / Core #3 31 °C (88 °F)
CPU #1 / Core #4 36 °C (97 °F)
GPU Diode (DispIO) 46 °C (115 °F)
GPU Diode (MemIO) 48 °C (118 °F)
GPU Diode (Shader) 42 °C (108 °F)
GPU VRM 37 °C (99 °F)
WDC WD5000AAKS-00V1A0 35 °C (95 °F)

Cooling Fans:
CPU 1530 RPM
GPU 1354 RPM (25%)

Voltage Values:
CPU Core 0.952 V
+3.3 V 3.328 V
+5 V 5.112 V
+12 V 12.197 V
+5 V Standby 5.212 V
GPU VRM 0.900 V

Power Values:
CPU Package 7.69 W
CPU IA Cores 2.79 W
CPU GT Cores 0.27 W
Debug Info F 164 1530 164 164 164
Debug Info T 38 33 22 / 255 35
Debug Info V 77 E7 D0 D0 81 D5 8B (03)
Debug Info I C1 C333


now, these r normal right, but whats with cpuid? sensor or its just me

nah is fine ... still quite cool .. will be worried if it hits above 80 degree celcius

good to hear, just up my multiplier to x40 (just curios0) temps stay about there, thanks guys