Lowyat.NET Forums

Welcome Guest ( Log In | Register )

LYN wins Intel-Lenovo-Tangs Blogathon challenge. Thank you everybody!
2 Pages  1 2 > 
RSS feedBump TopicReply to this topicStart new topicStart Poll

Outline · [ Standard ] · Linear+

> [WTS] Overclocking and other services, - updated with a little pictures - (Hardware Mod & Repair)

general_odin
post Jul 19 2009, 05:23 PM


audiophile wannabe
****

Group: Senior Member
Posts: 677
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Nov 2006
From: Selangor, Malaysia






Overclocking, Cable Management, PC Cleaning, Hard Disk Format and Partition, RAID and Bios Flashing (motherboard and graphics card)
(no personal guarantee will be provided for any hardware or services)


- Overclocking -
Requirement: Overclockable motherboard, processor, rams and good processor heat dissipation
Description: Maximize the productivity of your system by overclocking. Overclocking is limited by soaring high temperatures, voltages, timings and stability. Overclocking will reduce your system's lifespan but in the hands of experienced overclocker, you will get the most out of your system with minimum damage possible.
(i'll also teach you the basics of overclocking so that you can do minor tweaks your self. Most computer's lifespan is 5 years, most overclocked computer's lifespan is 3-4 years, and the latest computer hardware will get obsolete in 2-3 years time)
Time consumption: 2hrs to 5 hrs
Price: PM for best price


- Cable Management -
Requirement: None
Description: Properly rearrange cables, group them together and hide them makes your pc looks better and not so messy. It also improves the air flow of your computer, making it cooler and prolong the lifespan of your hardwares.
Time consumption: 20mins to 2hrs
Price: Starting from RM20


- PC Cleaning -
Requirement: None
Description: Cleans your pc and reduce dust level in your pc. It will reduces hardware temperature and lower the possibility of unwanted static discharge. By doing that will increase overall system stability and prolongs your hardware's lifespan.
Time consumption: 20mins to 2hrs
Price: Starting from RM30


- Hard Disk Format and Partition -
Requirement: Formatable hard disk
Description: Clears every bit of data in your hard disk and eliminate viruses and bad sectors. It will improve hard disk seek, read and write speed. However it will remove all the data stored in the hard disk.
Time consumption: 30mins to 2hrs
Price: Starting from RM20


- Redundant Array of Independent Disks (RAID) -
Requirement: A pair of identical hard disk or a pair of same model hard disk
Description: Merging 2 or more hard disks together.
RAID 0 distributes data across several disks in a way that gives improved speed. If one disk fails, however, all of the data on the array will be lost. (faster, total capacity remains constant)
RAID 1 mirrors the contents of the disks, making a form of 1:1 ratio realtime backup. The contents of every disk in the array are identical. (safer, reduced total capacity)
Time consumption: 30mins to 2hrs
Price: Starting from RM20


- BIOS Flashing -
Requirement: Flashable or compatible motherboard, graphic card or wireless router
Description:Overwriting the BIOS contents with a newer or better BIOS image to enable some functions, improve performance, stability or change the product ID (example change from GeForce to Quadro)
Time consumption: 20mins to 1hr
Price: PM for best price


Note:
No personal guarantee will be provided for any hardware or services, however i will try my best to assist you if any problem occur.
PM me for consultation, best price and discuss about venue and time.
Price quoted subject to change without pior notice.
Price quoted above are for reference only.

Location:
Petaling Jaya (weekends)
Puchong (weekdays)

This post has been edited by general_odin: Sep 9 2009, 03:11 PM
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
general_odin
post Jul 19 2009, 05:24 PM


audiophile wannabe
****

Group: Senior Member
Posts: 677
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Nov 2006
From: Selangor, Malaysia






a little interesting worklog... only very interesting one will be uploaded here XD

user posted image
user posted image
destroyed Swiftech GTZ waterblock and an Intel Core i7 still stuck on the processor fastening bracket

somehow the GTZ melted onto the bracket (motherboard) and the processor... (i dont know how, but it just happened)
im there to clean up the mess biggrin.gif

user posted image
motherboard with processor fastening bracket removed from it

user posted image
closer view on the side of the GTZ cut by me in order to separate it from the processor fastening bracket

user posted image
some of the tools i used...



» Click to show Spoiler - click again to hide... «


This post has been edited by general_odin: Sep 9 2009, 04:02 PM
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Paca
post Jul 19 2009, 06:04 PM


/k/ fans
******

Group: Senior Member
Posts: 1,210
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Jan 2009
From: What Gives?







if i wan to make my pc buy buying a 2nd item from here u arrange it can?
how much arh?+overcloacking?
User is online!Profile CardPM
Go to the top of the page
+Quote Post
general_odin
post Jul 19 2009, 06:18 PM


audiophile wannabe
****

Group: Senior Member
Posts: 677
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Nov 2006
From: Selangor, Malaysia






no prob... im not selling hardware anymore except casing fans and some thermal pastes.

the rate of overclocking is based on the amount of time i spent overclocking your system and the stability of your system determines the amount of time i will need to spend...

we will discuss that in pm biggrin.gif
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
streetkid
post Jul 19 2009, 06:28 PM


Newbie
*

Group: Junior Member
Posts: 18
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Sep 2008
From: PJ, Kuala Lumpur, Malaysia





can overclock mine..?? how much best price..??
User is online!Profile CardPM
Go to the top of the page
+Quote Post
asamkipas
post Jul 19 2009, 06:30 PM


Barakallah alaika...
****

Group: Senior Member
Posts: 609
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Apr 2008
From: Selayang,KL







ohh ini mcm punya service pon ada =)

notworthy.gif notworthy.gif notworthy.gif
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
general_odin
post Jul 19 2009, 06:33 PM


audiophile wannabe
****

Group: Senior Member
Posts: 677
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Nov 2006
From: Selangor, Malaysia






why not XD
i've been overclocking and benchmarking for sometime already...
now i have nothing to do... so much free time so must well i put all my knowledge into good use XD


Added on July 19, 2009, 6:34 pmanyway... nice heat sink you got there... hehee

This post has been edited by general_odin: Jul 19 2009, 06:34 PM
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
x-1o8-x
post Jul 19 2009, 06:55 PM


Getting Started
**

Group: Junior Member
Posts: 263
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Jun 2009
From: lala island





QUOTE(general_odin @ Jul 19 2009, 06:33 PM)
why not XD
i've been overclocking and benchmarking for sometime already...
now i have nothing to do... so much free time so must well i put all my knowledge into good use XD


Added on July 19, 2009, 6:34 pmanyway... nice heat sink you got there... hehee
*



hmmmm i cant seem to find general_odin in hwbot.org or ripping.org... could it be u didnt submit your benchmark results?

i wan OC my q9650 to 5.5ghz with 4 cores enabled... 3dmark vantage/wprime 1024m/super pi 1m stable... so how much will u charge me???
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
hong1380
post Jul 19 2009, 07:18 PM


Getting Started
**

Group: Junior Member
Posts: 252
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Aug 2007




5.5ghz...-.-
User is online!Profile CardPM
Go to the top of the page
+Quote Post
anep
post Jul 19 2009, 07:22 PM


Xtreme Freak
******

Group: Senior Member
Posts: 1,431
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Nov 2007
From: 1704-46




can post ur previous work of OC n cable mgmt?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
xixo_12
post Jul 19 2009, 07:25 PM


Chip 'GRiD' Dale
*******

Group: Senior Member
Posts: 5,220
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Nov 2006
From: Pulau Sipadan Status: Single Core




should be in service thread right?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
faizal87
post Jul 19 2009, 07:25 PM


Getting Started
**

Group: Junior Member
Posts: 295
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Jan 2007
From: ampang@penang






QUOTE(hong1380 @ Jul 19 2009, 08:18 PM)
5.5ghz...-.-
*



iziy posibble? tongue.gif
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
x-1o8-x
post Jul 19 2009, 07:50 PM


Getting Started
**

Group: Junior Member
Posts: 263
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Jun 2009
From: lala island





QUOTE(faizal87 @ Jul 19 2009, 07:25 PM)
iziy posibble? tongue.gif
*



maybe can la... hope to be da 1st HAHAHAHAHA... but 5ghz below is possible

http://hwbot.org/listResults.do?cpuModelId...=true&limit=100
http://www.ripping.org/database.php?cpuid=851

just hope my proc fsb wall is vely high when paired with a vely good mobo, and hopefully it wont kena cold bug too fast @@

This post has been edited by x-1o8-x: Jul 19 2009, 07:51 PM
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
ganabathi
post Jul 19 2009, 08:17 PM


still newbie
*****

Group: Senior Member
Posts: 809
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Jan 2008
From: Taiping / Sungai Petani / Butterworth






boss y dont give overclocking tution classes, raid, format, hardware and cable management can charge more than that...
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
viruz019
post Jul 19 2009, 09:28 PM


Getting Started
**

Group: Junior Member
Posts: 259
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Mar 2008
From: In Ur HardDisk





lol..if got oc class..i wud attend it =D
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
general_odin
post Jul 20 2009, 08:22 AM


audiophile wannabe
****

Group: Senior Member
Posts: 677
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Nov 2006
From: Selangor, Malaysia






QUOTE(x-1o8-x @ Jul 19 2009, 06:55 PM)
hmmmm i cant seem to find general_odin in hwbot.org or ripping.org... could it be u didnt submit your benchmark results?

i wan OC my q9650 to 5.5ghz with 4 cores enabled... 3dmark vantage/wprime 1024m/super pi 1m stable... so how much will u charge me???
*


for a core 2 quad to reach 5.5Ghz is really hard... seriously
even for an i7 920 reaching 5Ghz would need liquid cooling (talking about 920 on an EVGA Classified)

QUOTE(anep @ Jul 19 2009, 07:22 PM)
can post ur previous work of OC n cable mgmt?
*


included in the overclocking service, will teach you basic overclocking so that you can maintain your comp and do some minor tweaks

This post has been edited by general_odin: Sep 9 2009, 04:11 PM
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Aura
post Jul 20 2009, 02:55 PM


Core i7 + 6GB + 3-Way SLi = Perfect!!!
******

Group: Senior Member
Posts: 1,714
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Jun 2006
From: Petaling Jaya





QUOTE(x-1o8-x @ Jul 19 2009, 06:55 PM)
i wan OC my q9650 to 5.5ghz with 4 cores enabled... 3dmark vantage/wprime 1024m/super pi 1m stable...
*



QUOTE(general_odin @ Jul 20 2009, 08:22 AM)
for a core 2 quad to reach 5.5Ghz is really hard... seriously
even for an i7 920 reaching 5Ghz would need liquid cooling (talking about 920 on an EVGA Classified)

I dun think can reach 5.5GHz.... The best overclockers in the world who is using phased cooling or LN2 can't even go to that stage and also a possibility of 0% of such chip's existance.... For i7 920, WC also cannot cope with it at a speed of 4.8GHz.... Need at least LN2 or phased cooling to get the job done and that's onli for benchmarking purposes.... IMO, most ppl will need solid settings for 24/7 setups and not for benchmark purposes.... What's the use of reaching at that point if u cannot use them???

This post has been edited by Aura: Jul 20 2009, 02:56 PM
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
general_odin
post Jul 20 2009, 03:49 PM


audiophile wannabe
****

Group: Senior Member
Posts: 677
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Nov 2006
From: Selangor, Malaysia






thx for all the explanation XD
i was having that in my mind too...

overclock's main purpose if performance boost, but if stability is lacking, then there is no point overclocking

as for me i overclock to the highest possible frequency the system could ever go without compromising its stability biggrin.gif


Added on July 20, 2009, 3:50 pmeh dude... how is your gay rig comin ??
try not to screw up your comp again ya XD
ahhahahaa

This post has been edited by general_odin: Jul 20 2009, 03:50 PM
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
x-1o8-x
post Jul 20 2009, 04:13 PM


Getting Started
**

Group: Junior Member
Posts: 263
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Jun 2009
From: lala island





QUOTE(Aura @ Jul 20 2009, 02:55 PM)
I dun think can reach 5.5GHz.... The best overclockers in the world who is using phased cooling or LN2 can't even go to that stage and also a possibility of 0% of such chip's existance.... For i7 920, WC also cannot cope with it at a speed of 4.8GHz.... Need at least LN2 or phased cooling to get the job done and that's onli for benchmarking purposes.... IMO, most ppl will need solid settings for 24/7 setups and not for benchmark purposes.... What's the use of reaching at that point if u cannot use them???
*



5.5ghz on core i7 is possible, there are results in ripping and hwbot to prove it... and its not like i wan to use it for 24/7.... i can do that myself, what i wan is to see how far can this proc of mine be pushed, thats all... thats y i said "3dmark vantage/wprime 1024m/super pi stable", not 24/7 daily usage stable duh -____-... i just wanna get benchmark results... who would wanna run 5ghz every single day and pour LN2 every single time just to keep the temperature cool -______-

as for my proc, chances are low i know, since world record is just below 5.1ghz biggrin.gif... but belum cuba belum tau biggrin.gif

This post has been edited by x-1o8-x: Jul 20 2009, 04:13 PM
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
gerogelow88
post Jul 21 2009, 11:41 AM


Getting Started
**

Group: Junior Member
Posts: 196
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Aug 2008
From: Bandar Utama





Hey dude... thx for the cable management and OC for the C8400 to 4GHZ..

Want me to post the pictures for you?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

2 Pages  1 2 >
Bump TopicReply to this topicTopic OptionsStart new topic
 



----debug section please ignore----
Lo-Fi Version Time is now: 24th November 2009 - 09:10 PM
All Rights Reserved 2003-2009 Vijandren Ramadass (~living on a prayer~)