Solaris 10 Question

Lowyat.NET Lowyat.NET Rules and Regulations

FAQ Help Search Members Calendar

Outline · [ Standard ] · Linear+

Solaris 10 Question, Confusing problem

Share on

| Track this topic | Email this topic | Print this topic

Cyrus2k

Jul 3 2009, 01:10 AM

Show posts by this member only |This post's rating (0+, 0-) | Post #1

Casual

Group: Junior Member
Posts: 414
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Jan 2003
From: Ampang/Setapak @ http://himitsu.us

Been working on a server (Sun M4000) lately, and just reinstall Solaris 10 in the server.
Since it lacks of its own display output, so I need to use Xbrowser to login the Solaris CDE.

There are 3 NICs on the server: 2 are used for communication links with other nodes while 1 is used for local access (Xbrowser).

Then I need to permanently change the IP address of 2 NICs (communications), so I modify the IP entries in the following file

CODE

/etc/hosts

then I reboot the server using

CODE

shutdown -y -g0 -i6

After I reboot it, I am unable to login via Xbrowser anymore. I can monitor the domain using the XSCF shell, but just that no idea what is causing this problem... By right, I should be able to login since I didnt make any changes to the NIC that I am using for local access..

Any experienced user mind to enlighten me?

zaidi

Jul 3 2009, 09:50 AM

Show posts by this member only |This post's rating (0+, 0-) | Post #2

Enthusiast

Group: Senior Member
Posts: 761
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Jan 2003

/etc/hosts is wrong place to edit. and since cde uses hosts to connect local, if you edit it wrongly cde will not start.

try to restore back /etc/hosts via console. i'm not sure the correct way to change IP for your solaris, but /etc/hosts is definitely not the one.

wKkaY

Jul 3 2009, 10:36 AM

Show posts by this member only |This post's rating (0+, 0-) | Post #3

Smile, what's the use of crying?
Group Icon

Group: Forum Admin
Posts: 4,535
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Jan 2003
From: Malaysia

Actually in Solaris you really do change IPs in /etc/hosts.

thefryingfox

Jul 3 2009, 10:59 AM

Show posts by this member only |This post's rating (0+, 0-) | Post #4

Lonely Maharajah

Group: Senior Member
Posts: 4,118
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Feb 2005

isnt it at ifconfig where u change the iP?
sorri im noob

Cyrus2k

Jul 3 2009, 11:53 AM

Show posts by this member only |This post's rating (0+, 0-) | Post #5

Casual

Group: Junior Member
Posts: 414
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Jan 2003
From: Ampang/Setapak @ http://himitsu.us

QUOTE(zaidi @ Jul 3 2009, 09:50 AM)

/etc/hosts is wrong place to edit. and since cde uses hosts to connect local, if you edit it wrongly cde will not start.

try to restore back /etc/hosts via console. i'm not sure the correct way to change IP for your solaris, but /etc/hosts is definitely not the one.

Actually, I have search through the internet and just like Wkkay had said, changing /etc/hosts is really needed (along side with /etc/netmask) to permanently modify the IP...

QUOTE(thefryingfox @ Jul 3 2009, 10:59 AM)

isnt it at ifconfig where u change the iP?
sorri im noob

ifconfig is just the temporary method to change the IP... after reboot the configurations will reset back to previous settings.

Still scratching my head on the solution; although I can just reinstall the server again but it was pointless since eventually I need to change IP then will bump back to the same problem... hmmm...

I can ping the NICs using the IP that I assigned to normally, just that my Xbrowser won't connect to the CDE

sylvian14

Jul 9 2009, 12:21 AM

Show posts by this member only |This post's rating (0+, 0-) | Post #6

Getting Started

Group: Junior Member
Posts: 76
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Feb 2006
From: KL/PJ

QUOTE(Cyrus2k @ Jul 3 2009, 11:53 AM)

Actually, I have search through the internet and just like Wkkay had said, changing /etc/hosts is really needed (along side with /etc/netmask) to permanently modify the IP...

ifconfig is just the temporary method to change the IP... after reboot the configurations will reset back to previous settings.

Still scratching my head on the solution; although I can just reinstall the server again but it was pointless since eventually I need to change IP then will bump back to the same problem... hmmm...

I can ping the NICs using the IP that I assigned to normally, just that my Xbrowser won't connect to the CDE

Actually, the way to change is to use a command called "sys-unconfig". This will cause the server to come down to single user and then you need to enter the network info again, like hostname, domain then the IP and the netmask info, as if you are going through the entire installation again, but only for the network portion. The server will then reboot and it'll be permanent.

"ifconfig" command is only temporary, as you have pointed out.

I know in pre-Solaris 10, you can use the /etc/hosts and the /etc/hostname.<interface_name> to make it permanent.

/etc/hosts - IP then your hostname as a entry
/etc/hostname.<interface_name> - just your hostname you have specified in /etc/hosts as a entry

Don't know whether Solaris 10 can still accept this method or it has change the structure all together. Still haven't played with Solaris 10 yet.

Hope that helps.

« Next Oldest · Linux & Open Source Software · Next Newest »