Lowyat.NET Forums

Welcome Guest ( Log In | Register )

 
 RSS feedBump TopicReply to this topicStart new topicStart Poll

Outline · [ Standard ] · Linear+

> How to connect Riger DB102 modem to Aztech router?

Share on | Track this topic | Email this topic | Print this topic
needtoknow
post May 25 2009, 05:47 PM
Show posts by this member only |This post's rating (0+, 0-) | Post #1


Newbie
*

Group: Junior Member
Posts: 23
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Aug 2008
Hi,

Previously, I am using Riger DB102 modem for my internet browsing. I am using dial up. Recently, I decided to connect my Riger DB102 modem to Aztech WL830RT4 wifi router. What should I do?


The following step that I will tried to connect :

1. Connect Riger modem directly to Aztech wifi router Wan port. (without setting anything and it use DHCP server: 192.168.1.1)
2. Configure Aztech wifi router to use PPPOE and DHCP server (ip as follow : 192.168.xx.1)

Is this connection correct? Do I need to disable DHCP on modem and just use router as DHCP server?

Thanks for reading and answering my post.


User is offlineProfile CardPM
Go to the top of the page
+Quote Post
MX510
post May 25 2009, 07:41 PM
Show posts by this member only |This post's rating (0+, 0-) | Post #2


PSNID darknforce
*******

Group: Senior Member
Posts: 2,236
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Aug 2005
From: Between Heaven n Earth
Set modem to bridge mode smile.gif
User is online!Profile CardPM
Go to the top of the page
+Quote Post
skyxis
post May 25 2009, 11:22 PM
Show posts by this member only |This post's rating (0+, 0-) | Post #3


[QVICE]
****

Group: Senior Member
Posts: 564
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: May 2005
No need disable DHCP for ur wifi router, just to make sure your wifi router IP address don't same with ur riger modem.

PPPoE mode, remember put ur streamyx account with @streamyx.

If your username is abc, then put abc@streamyx in PPPoE mode as ur PPPoE account username
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
needtoknow
post May 26 2009, 09:46 AM
Show posts by this member only |This post's rating (0+, 0-) | Post #4


Newbie
*

Group: Junior Member
Posts: 23
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Aug 2008
I think by default it is bridge mode and it use DHCP server. So no need to set anything on modem. Right, If will try to follow what you all suggest. Thanks for reply.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
skyxis
post May 27 2009, 12:39 AM
Show posts by this member only |This post's rating (0+, 0-) | Post #5


[QVICE]
****

Group: Senior Member
Posts: 564
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: May 2005
QUOTE(needtoknow @ May 26 2009, 09:46 AM)
I think by default it is bridge mode and it use DHCP server. So no need to set anything on modem. Right, If will try to follow what you all suggest. Thanks for reply.
*



Yes, by default is bridge mode. But just for safety, please reset your modem by pressing the reset button about 10 seconds after you power on it.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
ronzai89
post May 31 2009, 04:04 PM
Show posts by this member only |This post's rating (0+, 0-) | Post #6


Getting Started
**

Group: Junior Member
Posts: 153
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Apr 2009
From: Where I came from? Status: Mad
QUOTE(skyxis @ May 27 2009, 12:39 AM)
Yes, by default is bridge mode. But just for safety, please reset your modem by pressing the reset button about 10 seconds after you power on it.
*




bridge mode thumbup.gif
User is online!Profile CardPM
Go to the top of the page
+Quote Post
cliv
post Jun 1 2009, 12:15 PM
Show posts by this member only |This post's rating (0+, 0-) | Post #7


Newbie
*

Group: Junior Member
Posts: 5
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Jun 2005
reset the DB102 modem at the reset button behind, then configure your Aztech router, should be allrite.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
MrDK
post Jun 26 2009, 02:33 AM
Show posts by this member only |This post's rating (0+, 0-) | Post #8


Newbie
*

Group: Junior Member
Posts: 13
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Sep 2005
I have a Riger DB102 ADSL modem and an Aztech NA8300 wifi router.
I managed to set up wireless connection but wired connections thru the aztech router doesn't work. It's either wired or wireless connection and I can't seem to have both of them at the same time. Anyone has any idea how to fix this issue?

Thanks.

On mac, forgot to change the IP address to the router's and on windows, juz had to release and renew the ip.

This post has been edited by MrDK: Jun 28 2009, 09:12 PM
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
myroom
post Jun 27 2009, 10:15 AM
Show posts by this member only |This post's rating (0+, 0-) | Post #9


Newbie
*

Group: Junior Member
Posts: 26
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Apr 2008
From: on earth
QUOTE(ronzai89 @ May 31 2009, 04:04 PM)
bridge mode thumbup.gif
*


may i know what mean bridge mode ermm blink.gif
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
fabianz03
post Jun 27 2009, 12:03 PM
Show posts by this member only |This post's rating (0+, 0-) | Post #10


Junior Pilot
*******

Group: Senior Member
Posts: 2,174
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Aug 2008
From: Sandakan
Bridge mode. Then connect.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
zaidizero
post Jul 12 2009, 01:33 AM
Show posts by this member only |This post's rating (0+, 0-) | Post #11


Getting Started
**

Group: Junior Member
Posts: 112
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Sep 2007
From: www.nvds.com.my
set modem as bridge mode (if its in router mode, reboot as factory setting) and the configure your aztech as router and select ppoe as encapsulation. Make sure your VPI=0, VCI=35
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
sproket135
post Oct 30 2009, 08:27 PM
Show posts by this member only |This post's rating (0+, 0-) | Post #12


Newbie
*

Group: New Member
Posts: 2
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Oct 2009
QUOTE(zaidizero @ Jul 12 2009, 01:33 AM)
set modem as bridge mode (if its in router mode, reboot as factory setting) and the configure your aztech as router and select ppoe as encapsulation. Make sure your VPI=0, VCI=35
*



how to set the modem as bridge mode??

im the beginner...pls teach me HOW!!
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
sjn hassan
post Oct 30 2009, 08:36 PM
Show posts by this member only |This post's rating (0+, 0-) | Post #13


Member's of MAKAN MEGGI club
*******

Group: Senior Member
Posts: 2,835
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Jan 2003
From: United States of Cybertron
QUOTE(skyxis @ May 25 2009, 11:22 PM)
No need disable DHCP for ur wifi router, just to make sure your wifi router IP address don't same with ur riger modem.


should be no problem bro since he's connecting through WAN port. So in this case, the router will be DHCP server


QUOTE(sproket135 @ Oct 30 2009, 08:27 PM)
how to set the modem as bridge mode??

im the beginner...pls teach me HOW!!
*



almost all the modem in the market are BRIDGE by default..so u just need to reset
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
sproket135
post Oct 30 2009, 08:41 PM
Show posts by this member only |This post's rating (0+, 0-) | Post #14


Newbie
*

Group: New Member
Posts: 2
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Oct 2009
QUOTE(sjn hassan @ Oct 30 2009, 08:36 PM)
should be no problem bro since he's connecting through WAN port. So in this case, the router will be DHCP server
almost all the modem in the market are BRIDGE by default..so u just need to reset
*



sjn hassan...
i already reset the modem many times...
but the connection still impossible...!!
any method??

thx 4 replying this message

p/s : im the beginner...
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
sjn hassan
post Oct 30 2009, 08:56 PM
Show posts by this member only |This post's rating (0+, 0-) | Post #15


Member's of MAKAN MEGGI club
*******

Group: Senior Member
Posts: 2,835
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Jan 2003
From: United States of Cybertron
try connect the internet using u'r modem same as previously..if it's connected, mean u'r modem already set to bridge

2. If not, try to reset the modem again..on the modem. press the reset button for 30s. then connect again using a dialer
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
ahcheap
post Nov 1 2009, 12:39 PM
Show posts by this member only |This post's rating (0+, 0-) | Post #16


Casual
***

Group: Junior Member
Posts: 448
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Jul 2008
QUOTE(sproket135 @ Oct 30 2009, 08:27 PM)
how to set the modem as bridge mode??

im the beginner...pls teach me HOW!!
*




Just reset ur modem.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
St.Paul
post Nov 8 2009, 06:49 AM
Show posts by this member only |This post's rating (0+, 0-) | Post #17


Getting Started
**

Group: Junior Member
Posts: 134
Ratings earned: 0+, 0-
Ratings given: 0+, 0-

Joined: Jan 2008
From: forum.lowyat.net
quickstart n set bridge mode.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
« Next Oldest · Broadband User-2-User · Next Newest »
 

Bump TopicReply to this topicTopic OptionsStart new topic
 



----debug section please ignore----
Lo-Fi Version Time is now: 25th November 2009 - 12:08 PM
All Rights Reserved 2003-2009 Vijandren Ramadass (~living on a prayer~)
Powered by Invision Power Board(Trial) © 2009  IPS, Inc.