Hi,forgive me if i post in the wrong place..

I am a Streamyx user, the modem i'm using (supplied by telekom) is broken, and i bought a D-Link DSL-2540T.
And because i'm not a technical computer guy, and this kind of modem (modem + router) is new to me, so i read the installation guide book supplied together with the new modem and go to the website and keyed in some number at the address bar (192.168.1.1) and run the wizard.

The problem is i dont know what else should i set...already set:-
-username
-password
-VPI=0
-VPI=35
-PPPoE/PPPoA...

the manual says if all these information have been set can straight connect to the internet...but i still cant connect...

already check the ipconfig/all...it shown:-

-ip address..................192.168.1.3
-subnet mask...............255.255.255.0
-default gateway..........192.168.1.1
-DNS server................192.168.1.1
-DHCP server..............192.168.1.1

also set my Local Network Connection to:-

-obtain the ip address
-obtain the DNS server address

i thought the router is faulty so i send it back to ASASHI...they also cant do it and they said maybe because they streamyx like got problem and they also have tried 3 new set of this router...

So can anyone here help me?

And also after the wizard, how to i connect to the internet? I used to have a shortcut in the desktop to connect to the internet when using the old telekom modem, do i still need it?

Thanks in advance.

Can you set the DNS information like below in your router and in your TCP/IP settings of your PC system?
Primary DNS: 202.188.0.133
Secondary DNS: 202.188.1.5

If you are using 192.168.1.1 for the DNS paramater, you are just treating your router as a private DNS server and it won't know how to reach the outside domain names on the Internet. Your router will be NAT'ed to its internal domain network (subnet 192.168.1.x) set by the router's DHCP service.

Just in case you miss this, your username should be username@streamyx

If your settings are correct (from what I see),
did you try updating to the latest firmware?
Sometimes this helps.
But make sure you know what you're doing. Proceed at your own risks.

http://www.dlink-me.com/products/broadband/dsl2540t.htm

-the vci =35 right?

-is your adsl light on? or blinking

-your username with '@streamyx' behind?

-check your router status if it is showing connected

-chosse never dial in the internet option connection

-try ping 192.168.1.1 and see if you have any reply, if yes

-double click internet explorer to access internet.

yurp...b4 this already test to put Primary DNS: 202.188.0.133 and Secondary DNS: 202.188.1.5 but still not work...

if i set the DNS manually what should i fill in Ip address bro?...192.168.1.1 or 192.168.1.2-254?...

if i wanna set the TCP/IP than should i disable DHCP on router?...

---

Added on July 25, 2008, 12:18 pm
already try to retype my username and password for many time already bro...maybe i'll try to upgrade firmware tonight...

what did u mean by "Proceed at your own risks"?...is it risky to upgrade firmware?...

---

Added on July 25, 2008, 12:25 pm

-the vci = sure 35(already ask TMnet bout the VPI & VCI)...

-adsl light = not sure its blinking or stay still but i sure its got light...

-your username with '@streamyx' behind? = yurp...

-check your router status if it is showing connected = the status is "waiting for...."...

-chosse never dial in the internet option connection = this one i dont know...can u help me where to set it?...

-try ping 192.168.1.1 and see if you have any reply = 192.168.1.1 got reply...0% loss...

Don't need to disable DHCP service if you are using a static IP address because DHCP can discover whether the IP address set in its table is in dynamic IP mode or in static IP mode. But, you must make sure the IP address falls inside the range of the subnet you set in DHCP service.

And the given DNS information is required in the router. It is provided by TM Streamyx.

When setting up DNS of the TCP/IP settings in your PC system (not in your router), you can leave them empty or use Streamyx's DNS IP addresses.

u mean only set the DNS in router and leave it blank in PC system?...

FYI my pc ip address(192.168.1.3) already detect as DHCP Client...i see it at the web browser(192.168.1.1)...but why i still cant surfing the internet?... am i not connected with TMnet yet?...

im going for lunch now...i'll be back on 2.30pm...anybody of u at pandan indah rite now?...come to pandan capital la...i belanja makan...after eat we discuss bout this problem la...

On your PC, default gateway should be 192.168.1.1.
DNS should be 202.188.0.133 and 202.188.1.5 on your PC.

Did you run the 'Set up a home or small office network' from your Windows > Network Connections?

yes bro...already run that wizard...but i forgot what type of connection i choose...what i remember is:-

on the wizard -> "Other" radio button and click next -> after that i choose the 1st option...

In my router setting, it will like what I have suggested to the TS. And, I have no problem with my settings. Normally, I will force the same DNS settings on my TCP/IP setting on all my clients to be the same like in my router's DNS settings (with Streamyx DNS IP addresses). And, I use PPPoE Routed mode and set a static IP address on every client within the subnet range set in my router's DHCP service.

can use 'ipconfig /all' and screen shot it and show to us..

i try do it tonight...

set streamyx DNS in my router and TCP/IP...also set static IP at TCP/IP...in my router i'll set to enable DHCP...

u also do like that rite?...

but how to set DNS address in my router?...

so it would be like this rite?...

[attachmentid=539176]

---

Added on July 25, 2008, 2:40 pm
sure can but the problem is i dont have internet at home...maybe i'll post it on monday if the problem still not solve...

Yes, the TCP/IP settings are fine now.

Right now, you just need to configure your router at http://192.168.1.1 by using the web browser. It will ask for admin username and password. If you haven't change it, the default username/password will be: admin/admin or admin/password

waaa...thanks a lot bro...u really help me...now i can connect to the internet already...

already call streamyx technical support and ask them to reset my account and now everything working fine...


thanks again bro...

Hello,


I am also facing the same problem, i just want to know if there is any risk using this setting. For example will it CRASH ?



[attachmentid=600157]

I don't think it will crash.

It wont crash your browser, so dont need to be worry.
It just point the dns to the correct IP that the user intended it to go.

Thanks

I remember that my friend also bought D-Link DSL-2540T. As in PPPoE username.. it should put 'username@streamyx.com' dont know why this model of modem need [.com].