iPhone 2.2
Instructions by Maverick Wil (POST)

1. Is your iPhone jailbroken? If Yes, proceed to 2. If No, check 1A.

1A. You need to jailbreak your phone first. After that you need to set up SSH. Instructions for jailbreak and SSH are available on the first page of the "iPhone for Dummies" (link) under item #2 and #14 respectively.

2. Download the "Default.phoneformat" file : [attachmentid=690865]

Alternative links : link 1 - frank8, link 2 - icebrew, link 3

3. Already have an SSH client (Winscp/Cyberduck)? If Yes, proceed to 4. If No, proceed to 3A.
3A. Download winscp for windows, cyberduck for mac
( http://winscp.net/, http://cyberduck.ch/Cyberduck-3.0.1.dmg )

4. Transfer the "Default.phoneformat" you just downloaded into your iPhone directory under " /System/Library/PrivateFrameworks/AppSupport.framework/ " using any relevant SSH clients.

Optional : Backup the original "Default.phoneformat" file in that directory first if you want to but it is not necessary.

5. Close the SSH program. Reboot your phone.
- Manual way : Hold on the iphone power button until a slider comes up, slide to off. Push power to on again.
- Automated : Using bossprefs or sbsettings press power and press reboot.

iPhone 2.1 and below
Instructions by Siawgu

Instruction for automated approach :
1. Open Cydia, select Localization.
2. Select Caller ID Fix Collection (ispazio)
3. Install, restart springboard.
4. For good measure, restart your iphone.
5. Done.

Instructions for manual approach :
(Download the attached zip file)
1. Open Cydia, select All Packages, Download OpenSSH.
2. Restart iPhone. Make sure wifi is on and connected to local router.
3. Go settings > Wi-Fi > Your connected router (Select the round arrow beside it)
4. Find the Ip address. Copy it down.
5. Download winscp for windows, cyberduck for mac
( http://winscp.net/, http://cyberduck.ch/Cyberduck-3.0.1.dmg )
6. Install and run winscp, cyberduck.
7. Insert the IP address you previously found into the Winscp/cyberduck config window
8. username : root, password : alpine
9. Use winscp/cyberduck, go to "/System/Library/PrivateFrameworks/AppSupport.framework"
10. Unzip the file you just downloaded, and replace that file in the directory.
11. Restart iphone. Done!

yup... i'm having the same prob as well...
downgraded back to 1.1.4 becoz of the caller id no fix yet...
hope someone can help us here >_<

Here you go.. I uploaded this afternoon..
modded the plist to support Malaysia tel no.

but before you can uplaod you need to install OpenSSH into your iPhone..

LINK

Thanks siawgu!! This is confirmed working on my iphone.

Just incase anyone else is searching for this and is wondering how to go about the process, I have updated my first post.

how to ssh using mac?

Install OpenSSH on your iPhone using Cydia the same way everyone else does. The on your Mac, download either Fugu or Cyberduck from the following links and use it the same way WinSCP works in the tutorial above. Good luck!

http://rsug.itd.umich.edu/software/fugu/fi...2.0-English.dmg
http://cyberduck.ch/Cyberduck-3.0.1.dmg


P.S. Hey Wah Kit, remember me? Tim from Elecom? Glad to see you here, mate. Great tutorial

Hi Friend i only get a doc with index.php.Could you please upload windows format.Appreciate it

---

Added on July 21, 2008, 10:34 pm


Appreciate a windows version please

Thanks

w0ot.. tempting
1 of most important apps for iphone

Yeah bro...just got to 2.0.One of the first thing i came across.So sad i deleted my old file.Also got popup call forwarding active dismiss.Before installer all got patch.Cydia nothin there man

nice, i was having the same problem. i will try this now. Thanks btw

please please pretty please can someone upload the windows version.
.plist

ive been the situation last nite
after a while, less than 20minutes i think, i revert again to 1.1.4

I am sure some of our sifus out there can convert and upload the file.It was done earlier when iphone came out ma

Guys, a Windows version of what? An SSH client? That'll be WinSCP as mentioned in the first post.

As for the .plist, THAT'S the only version there is. All you have to do is upload it to the right directory in your phones, no editing or amendments required

i feel so dumb...thanks guys

i cant find directory folder in my phone where izzit?

woHooo!! im pwning my phone with home cook-ed 2.0 fw via h@ackintosh
hope all running smooth

---

Added on July 22, 2008, 4:53 pmerr im confuse.. after unzip the file.. am i have to paste the "PhoneNumberTemplates.plist" folder to the ../AppSupport.framework OR just the .plist file?

TQ

just the plist file to replace the existing file inside the folder.

finally found the folder.

kewL.. its working now

TQ

i tried everything, but now its getting worse i cant even go into sms and calls. shit pls help me

---

Added on July 24, 2008, 12:42 amokay i give up! i dunno whats wrong with my phone, i did exactly what i am suppose to do. The result was whenever i tap on phone and sms it jump to the homescreen!

Ohhh i love ziphone

I'm having exactly, the same problem as this guy. Thank goodness I backed up my old plist file.
Anyone else having this problem ?

Hmm it seems that it works for some and doesnt works so some.

This is weird.

do you backup'ed your original plist? make sure it do..

The iPhone will jump back to your Homescreen is becos the plist is not readable or corrupted.
maybe you try to reupload the plist to the directory and reset your iPhone.. That's what i did.

i found after upload the edited .plist, need reboot manually & not from ssh command. else it wont works.

this happen to me, dunno for the rest

I think should be no problem i oredi unlocked 3 iPhones to 2.0 and uploaded this plist.. and it works..

Hi guys,

Wondering whether it can be done on FW 1.1.4?

no need la, there is appsupport for 1.1.x already & can be d/load via cydia or installer..

In Installer,

1. Add http://installer.iClarified.com to your Sources list, then refresh.

2. Under the new "iClarified" category, select and install the AppSupport Patch (1.1.4).

3. Reboot your phone and DONE!

Thanks man for this tip! Helps a lot!

is the uploaded file corrupted ?

i tried downloading it & view it by wordpad

it seems like it is showing in unreadable format, i cant understand it.



i did reuploaded the plist & reboot the iphone
but the result is still jumping back to home screen when ever i press call or sms

---

Added on July 31, 2008, 10:53 pmany help ?

for Iphone firmware 2.0 u can replace with the PhoneNumberTemplates.plist at /System/Library/PrivateFrameworks/AppSupport.framework/

or those who deleted the old PhonenumberTemplates.plist u can download it from here http://cbisu.wordpress.com/tag/iphone/

i suggest dont delete/ replace. just rename the ori PhonenumberTemplates.plist with .bak extinction or anything u like
then, copy/ upload the modified PhonenumberTemplates.plist to the correct folder

ps: if anything gone wrong, u still can restore the ori PhonenumberTemplates.plist IMO

Phew...After 3 hours...Manage it get it done!~
Thanks for the info...

You JB your iphone ?

yea... you JB your iPhone 3G ?
Is it by default the contact's name won't show up for iPhone 3G ?

Or that happens only after u JB ?
Pls clarify further... TQ.

afaik, this only happens to places where iPhone is not scheduled for launch...

so yes, iPhone 3G won't show the contact properly by default. and yes, he jailbroken his iPhone 3g

Psyeo,

Really ka? Hmmm..that's weird wonder what's the logic behind this where only happens in countries where iPhone is not officially lauched.

@baretta
Yes, was trying...but finally i JB it.

@friends
It can show up, only appear +6012XXXXXXX for sms..
after JB it, everything it back to normal..

@psyeo
Thx for ur help today

not virgin la your iPhone. Ekekeke

huh ? no other method to resolve the problem rather than JB ?

frend, urs was the unlocked or jailbreak type?
how bout appsupport, izzit support natively, i mean does it require appsupport to display caller id?

I upgraded my iphone to 2.0 last night. the phone keep on hanging up everytime i run Cydia. aNY IDEA WHY?
By the way, i used winpwn to create custome ipsw and restore using itune 7.7
Pls help. I'm thinking of downgrading back to 1.1.4

tq

Kasmankk

No choice...without the appsupport, i cant recognize the sms...too many number in my phonebook

err... my iPhone 3g is unlocked by default, and I jailbroken ever since the pwnage tool is there.

i'm not using appsupport atm, coz i'm still in NZ, no problem with caller id thingy

---

Added on August 5, 2008, 8:07 amrarrrr, 2.0.1 firmware just came out....gonna jailbreak it again, after the pwnage tool is out for 2.0.1

Those who want to maintain the virginity of their iPhone 3G, you will have to do it the hard way: re-edit all your contacts to add +6 at the front of all their numbers to have their numbers displayed as names. This may be unconventional to some, but to me, it is normal. I have almost as many local Malaysian contacts as I have international ones.

And my Aifontriji keep its butt cherry and its vaginal hymen at the same time too.

Long live virgin iphone..hehehehehh

refer to stringfellow post, you also can add-in the same number under the same contact. eg. Ah Beng Mobile +6012xxxxxxx and mobile (012)xxxxxxx.

---

Added on August 5, 2008, 2:48 pmjust update my firmware...the appsupport gone..
it back to normal...

---

Added on August 7, 2008, 7:31 pmguys, i have just downgrade from 2.0.1 to 2.0..
it seems like the PhoneNumberTemplates.plist doesnt feed.
after i insert it...the dial pad got no reponse and the incoming call as well..
any idea?

hmm doesnt seem to work for me. i tried copying the plist into the directory, then i restarted my iphone and i cant seem to get into my SMS. when i recopy back the original plist into the directory everything works again. i tried redownload TS plist, and recopy it again (more than 10 times now) and still facing the same problem. any1 can help?