someone selling at garage sales at 50.

ic bro... but isn't it tx-2 is from tuniq? i've been outdated from coolin for quite sometimes ledi...


yup, i would personally recommend that too, a.c coolers are silent & good for normal oc...

may need to change topic

@imsmiko
u using GAYGAYbyte?? sumting weird laa.. for 3ghz wit stock cooler is enuf, remount back ur HSF n check settting

did u disable the CnQ?

*later ask me what is it - lol



4+C

freezer is not good enough when comes to high volts


you're right, Artic MX-2 and Tuniq TX-2.

Where got?AC not really bad lehz.Last time mine 1.55V around 70C Load

@ OCZ
Maybe the Oc-ability + the performance is significantly faster than Yorkfield(Fudzilla said)

1.4v wont be high for a brisbane, because it was 65nm..

---

Added on August 1, 2008, 9:41 am
then xigmatek really done a good job, F3 1.54v can maintain below 55c

Gaygaybyte can OC that good ? For AM2 it is not a good choice IMO. My friend's mobo died when he tried to push 5k BE

idle. load 62c. room temp yesterday 33c.



rayfoo already sold his.



another one is intel one he say.



is this good?



yes. using it. will ask my friend to check today. gigabyete no good?



c&q disable and virtual some something.

some of AM2 gigabyte board can be oced nicely, some of them works better than other brands...

i'am running vcore 1.4 at 3.0Ghz but it still fine

, 1.5v i will try la later but my ram seem holding me back

not ram.. brisbane is like that.. >3ghz need high voltage.. reach the limit though..

do not disable d virtualization, u gain nothing by disabling it.


yup, a.c is decent enough for that range of voltage. but for 1.5v & above, i think better settle for higher end model...

u can try with 1 single ram only . 1gb


AMD ocer oc intel

High end? I'm not going for WC . Your suggestion?

high end means true & xigmatek or orthers la...

Achilles is nice i see. s1283 still not that good.

but it costs as much as RM200 or more...


for mild oc, a.c coolers are gud enuf, trust me...

Really ah ? Higher model ka ? Because last time we're using S2G and S3, lack of OCing features and cannot go any higher. At least not as high as Biostar mobo

Hi..sifus out there..wanna ask a question here..anyone who is using Biostar TA770 A2+ out there? The north bridge chipset is terribly hot..how bout u guys? juz wanna know..the passive heatsink there is quite small, do i need to change it to another one with active cooling one..how bout the abit ax78 user? did the silent otes performed better?

red scorpion s1283 at rm165, quite good..

---

Added on August 1, 2008, 7:20 pm
Achilles s1284 got extra 1 heatpipe only, not much different..

I thought the only difference between s1283 and archilles is the size slightly bigger?

No..bottom part big a bit only..with 4 heatpipes instead of 3..

I done a little mod by adding 2 small foxcorn fan . size 40x40 i think la, running at 4900rpm

1 for south bridge and 1 at the north bridge.

Look something like this la (taken from internet)

[attachmentid=546144]

d silent otes is crap for me, no proper contact made between d mosfets & d passive heatsink.

i remove 'em all & slapped a cm chipset cooler on d nb (put a cm 4cm led fan on it too) & put small chipset heatsink on d mosfets, temp dropped atleast 5'c more than d silent otes...

Refer to this and you"ll get the idea

http://forum.abit-usa.com/showthread.php?t=136994

Hehehe ..how hot is da ??

mine n/b edy mod with better cooler. and all PWN mosfet for cpu , ram and n/b edy mod with ram heatsink

So my n/b temp is around 30c to 36c and mosfet using ram heatsink no very hot (using my hand feel it)

i know that, but even tighten d silent otes w srew instead of pushpins but still d heat dissipation is not gud enuf.... i thought d silent otes was soldered together but when i use some force d silent otes dissembled to 3 parts...

Mine no worry,an 80cm fan is ready to blow out the heat
btw bro ah khoo..So far whats the latest OC from you?

yup, judging from the design it self seem a little bulky.

and very hot before the mod.

u mean my lousy f2 3800+? can't oc much, 2.5GHz seems d max for 24/7 setup. waitin for d b3 9550 but i guess earliest end of next week only can get...

so far i'm more happy w my ram instead... was a steal gettin 'em...

new phenom user? 9550?

hopefully it can reach thursday... i'll be happy if d chip can reach 2.7~2.8GHz... fingers crossed then...

@MENCHELSEA
Icic..i have no idea wat type of fan to put in..thinking to get one active cooling for it

@ah_khoo
totally no contact between the mosfet and the passive heatsink?..gosh i almost get this mobo juz because of the silent otes pipe

@digswell
walao bro..custom WC for ur NB..poor student no money for WC..between i m thinking to get the evercool serpent how's tat sound?is it ok?

got but d contact was poor...

it's a budget board bro, so dun expect much... u get what u paid for...

which one is better to cool down my f3. xigmatek s963 rm100. s964 rm120. gemini 2 rm110?

What is the different between s963 and s964? I think the s963 is more than enough already unless you are very extreme..

I luckily found unused fans from old proc at my office, and seem to fit my mobo.

Just do what your think is right.

But it a little bit try and error, and learning from experience

one more heatpipe.

seem in love with many heatpipes

the more something have, the better right?

Is it their strategy or what?Last time the shop seller ask me to buy archilles when i told him i use AMD..reason is that he said the base of archilles is bigger and can cover the whole AMD proc..but i bought red scorpion after all because it saves me RM20 ..no much different also another heatpipe more..the red scorpion didn't contact the whole surface of my processor but so far the temp is ok

@MENCHELSEA
i look from my frens..see whether they got the 4cm fan or nt..try to mod it..

Wai. where everybody go? all go clubbing already? all fengtau mode ka?

Not all, but depend on built quality and surface contact with proc.

that have another meaning as well. you didn't get it. do you?

o.O? u also know fengtau.

guys... stop off topic lah... enuf is enuf...

LOL ok, need advice to OC my 4800+ on M2A-VM. Stock vcore @ 2.9g now. Need 1.475-1.5 to push to 3.2g. izzit normal? I've done that but the temp seems abit abnormal 64c and going. Doubt i dint install my heatsink properly.

If can cool down n/b temp below 40c is enuf

i think 1.5v is normal to oc that high, cause i stuck at 2.8Ghz only on my previous M2A-VM.

i'am not so sure with the temp.