Dont grab BE lor.Wait 750SB Come out or wait Deneb ~.~

That is indeed my plan. But you know la, sometimes feel the rush or impluse to buy.....

I might not even buy SB750, i'll see how reviews look on it first.
Its a hunch, but I think SB750 will not help oc phenom better actually... marketing gimmick.
Change mobo and proc just to get an extra 200mhz??? hmmm....

really can enhance eh? hope that tools don't just a gimmick..
u guys ever maintain the HT link below 2k? could it be the culprit..

believe me bro, we have tried everything (in voltages) we can (atleast me)...


yup, if i'm to get a b.e, i wud expect atleast 2.9GHz... but if new board can brin our b2 to 2.8GHz, then investin on new board would be wiser choice imo...



well, i'm puttin my bet on sb750 boards thou... d only thing that will hinder me is d data migration as i'm on raid 0. change of mobo means everything need to be back up & re transfer again, lotsa work there...

for 65nm, 9950 seems to be d last hope, but price wise still abit steep...


am2+ htt link is 1.8k*2 by default, so 1.8~2.0k*2 still safe imo...

no.. i'm not talking cpu side.. maybe it's due to mobo limitation..
if the board capable doing >2k then ok..
u know la.. AM2+ mobo also donno can fully support or not.. bios/hardware etc..
that's why i want to test it later.. the only confirm support is my mobo capable doing >300HTT n >1.5k HT Link..

I hav a noob question... what u guys recommend for AM2+ mobo?
budget around RM500++. can i get a full solid cap mobo with this price?
currently using Asus M2N-E with Athlon X2 6000+, very unsatisfy with it...

not so sure w/ d price over there but if u die die must get one w/o waitin for sb750 boards, msi's k9a2 plat is a gud choice.

* omg... i can't imagine i'm recommendin a msi board to others...



htt for am2+ & am2 is diff mah... for sure d board can run 3.6k, but it depends on what chip ur runnin...

Hmmm i remember i've read at tgdaily and also at fudzilla that sb750 supposed to bump phenom multi higher abit.. giving us free 200-300mhz?

some news about unlocking the 6 hidden multi pins on a phenom.
I wonder does it apply to B2's...

Hidden pins?Means there's some pins that not activated fully?

Something to do with this.

mayb u can try out TPower N750.. if u are using SLI then no doubt to go for this board
but the chipset temp might vr high

lol X2? boring de with this gimmick.. even previous mobo also can hit 3ghz easily..

well, i always takes news from fuzilla w/ a pinch of salt only...

haha they think buying mobo like changing pagoda shirt only..

ya board gud enuf bro, all u need is a quaddy... we're still waitin for a 9950b.e user... u'll be d 1st then...

no la.. add a little bit more.. u can grab it when manage to sell urs..
i just spent for raynox and a few gundams.. kopak edy.. must wait sometimes for regeneration.. lol..
btw.. no sign of new proc @ lyp...
these days also very hard to see ppl selling amd proc.. not like last time.. bulk here there with affordable price..

wow so fast even v9 page 4 edi...umm,i've oc my 5k blackie but in occt juz manage to hold until 3 min(N0 ERROR).but temp in my AbitEQ show like 80+C,i've stopped occt then check occt log the temp only like 55+C,which i sould follow then??is my OC success??

not follow anything.. follow ur heart..
3min to know the success?? still early to predict..

if follow my heart will burn CPU then i will cry de...i'm in ultra coutious mode when OC... mind some help maybe??i wanna be in the list too

picture describe a thousand word.. maybe it can help us.. post here CPUZ

ok i'll post some tomorrow,now at cafe...

maybe ur temp is becoz the DTS prob..
have u tried touching th hsf ?

@ah_khoo
thanks for da explanation bro~!!

not much improvement but still a 'lil...

1076MHz @ 5-5-5-18-23 w/ 2.0v, this time w/ memory mode = unganged

[attachmentid=532438]

will try harder this weekend, hopefully can reach d ultimate goal... 1100MHz...

Er guys,i need some suggestion for a cpu cooler for X2 4800+. budget around 100-150

i heard ganged/unganged still 128 bit?
actually what's the different?

RM 150? Xigmatek S 1283

@AMDAthlon

Bro..may i know how much vcore for ur 4600+ F3 to do 3.1Ghz stable? Mine i try stock vcore but weird things happened which orthos till 30Mins+ it auto restart and superPI reach 4th or 5th loop the comp also automatic restart ..

Mine 4600 F3 3.1Ghz @ 1.25VCore
Whats your VCore?U using same proc as mine?
Mine Stock VCore is 1.2V

Same here..in CPUZ it shows 1.2V but in the bios it shows 1.25V..so actual is the one shown in bios?

temp, voltage (includin d consistency of voltages), memory... could be any one of these...

but auto restart sounds more like ram stability issue for me...

Thanks bro..currently still trying to figure out the problem..i m using Muskhin Enhance Performance ram which default clock is running at 1066Mhz..so i lower it down to 667 and hence it reach 750 when i am running at 3Ghz..may try with another 667 ram and see 1st..

Lower the divider to 400.

what for.. he can set 800 instead..

Haha..tats what i m wondering..the ram speed shud be at 1066Mhz when i plugged into my mobo (Biostar TA770 A2+), the ram run at 800Mhz and the vdimm is at a default of 1.95v.. ..dun this mobo support 1066mhz ram?

I think will only support 1066 when u using a phenom with this mobo.
Either that or capable OC to 1066.

ur mobo ta770 bios date version=?

bro..newest 1..A78XA612.BST

can list ur rig spec..hard to know what hardware u using right now....

Ta770 do support 1066 ram (only when using phenom proc) ...and stock vdimm is 1.95v

if u on HTT 200 set the 1066 divider..(most mobo by default set @ 800)
if u using HTT 250 set the 800 divider to get 1066
this is base on 12x cpu mul..
u should try to understand the table @ first page

Thanks bro..now having a chat with bro digswell in msn..c how things go 1st..

For fun, benched 1M on 240HTT stock vcore
[attachmentid=532833]

Able to boot and see my own CPUID at 246HTT, not even Super PI capable yet...
[attachmentid=532834]

Loosen memory timings in hopes of stable OC? Any sifu here to help?

now i see u reduce the HTT Link.. told u it could be the mobo limitation.. maybe can try 3ghz lol..
actually what ram u using n what's it capable of.. better show advance setting also..

Btw Phenom B2 increase voltage gives nothing?

Its more to NB multiplier... so when I lower the multi I must lower HTT link too. HTT link cannot be
higher than NB if I'm not mistaken?

Can only post until 250HTT which nets me 2750mhz.. somemore post not stable.

Erm, will show rams later tonite or next week. Working on the weekends +_+



Nope. Infact if my mobo can undervolt, I would go to 1.1v or 1.15v...

owh..hold on hold on.. it seems that im already outdated here.. everybody's talking bout phenom.. my silly rig cant cope wif u guys nemore.. dun know how to OC..haih...

@cyloh=btw, 2.7ghz wif phenom b2 is still considerable..nice clock mate..

@8tvt=saw ur siggy, when will phenom reside in that board? dun waste it..

@amdathlon.. come show us ur F3 capabilities..

Any phenom (not 9350e/9150e ar...) he puts on his mobo will fly hehe, come on 8tvt... take the dive and suffer with us

If only phenom is like F3... stock volts oc kao kao....

Cant push further lehz bro alive.Stuck at 3.1Ghz@1.25VCore.No $$ to buy HSF

3.1ghz@1.25v orthos stable? come buy my TTBTVX

o.O
Offer me lor
TT BTVX good than AC64?

yes i've touched it and not soo warm...

heres cpuZ


and DTS

and take note my balckie stock MHz!!! 5k GHz !!!wooot!!!