Wao..full of poison
Me now still CRT 17 d
bro ah khoo,its depend on you,but for me i will go for Biostar instead.

Me also using CRT ,

but with extra feature (The color goes dull automatically , "Ketuk2" came back to normal.

Using 4850 with 17" CRT?

bro ahkhoo buying 790gx already.. nice2. wanna see oc results on that board. if singapore rm400, wonder how much it cost here..

@fatalynx
abit x78 is a good oc mobo for its price. xtremesystem forum got discussion on that board. even ahkhoo also active there (before he sold off his board).. im also looking for it now. cannot afford high price 790gx...

i hit her hard lol

---

Added on August 29, 2008, 3:01 pm

yup good mobo for a good price ...btw guys...i got a new gf now her name AX78 heheh onli RM260 ...since my old gf
died already...any1 can share a bit some xperience on this bebey thx

---

Added on August 29, 2008, 3:03 pm

i also use CRT lah but 21" so big like TV lol

Seem like a lot of people still using CRT.
We should open a CRT thread.

I will be the leader Hahahaha

-pWs-

A thread CRT VS LCD .....

Dont think it's mobo problem. There are people in Rebel forum running phenom quaddie at 3.4GHz+ 1.5V 24/7 no problem. But it needs heatsink + fan.

AX78 mosfet heatsink there u nid to put a small fan on it....coz the mosfet heatsink is very hot...
u may ask ah khoo bout it

errr...the thread for OC of CRT ke? lol

-pWs-!!

im using abit anm2hd, the thing is, i cant OC my 2.2ghz to 2.4ghz (so tat my ram will be 800mhz) when ever i push my fsb to 218mhz with 1.275 or 1.3v (def is 1.25v) it will hung when restart. either the rev19 bios didnt allow it i guess, bcoz when still in rev18, sometimes it can restart, sometimes cant. now my ram is 733mhz lol.

Hahaa...sorry

-pWs-

owhhh...ok thx a lot bro!! so bro ah_khoo...
actually i already got 80mm fan blow from side of the heatsink...do i need to put another fan on top??

vdimm?? cpuz help alot

vdimm is 1.8v, but i think it is the bios. i have bought asus m3a b4 bought the anm2hd, and i can OC it easily. but since tat mobo sux like hell (the chipset heatsink freakin flimsy it can reach 65c on startup) my pc always hanged.

CPUZ screen shoot with memory tab

sorry cant provide tat, im in office hehe, but not a big thing actually bcoz i was able to OC it on asus, so abit bios is locking it from me OCing.

what i know is the nforce chipset 630a /7050 is almost same with COMPAQ Persario V35xx series and V36XX series...da chip is very hot
maybe is the heat causing the problem. What is the GPU & NB temp ??

no no no, my abit mobo is fine, nothing is wrong, gpu 49c idle, nb 45c idle. i really sure its the bios, bcoz on rev18 i was able to OC it (even though sometimes can start, sometimes not), but when i upgrade to rev19, everything is being locked out.

different hw give different result

---

Added on August 29, 2008, 3:57 pm
so just change it back .. more better

nah, i stick with rev19, at least it will always start, rather than i OC rev18 and sometimes ok, sometimes not.

not all latest bios mean good to u.. sometimes it getting more s*ck

Poison a bit

i was thinking getting a new mobo, like ax78 for its CF, but i didnt play much of a hardcore games, the only game i will buy is half-life (got the orange box few months back) and i guess if there is a game tat i will truly play using CF, maybe i will change my mobo. but tat mobo still new and didnt give me much of a headache except for those lockings, imma stick to it for a while. my fren oso like to racun me to change, but i juz change from asus to abit, so better stick to it first. i racun him, he racun me. lol

Are u using stock AMD cooler?
Last time i manage to hit 2.7Ghz with that thing(stock cooler) + Lousy Asus M2A-WM

yea im using the stock cooler, already thinking to change to xigmatek, but since i decided not to OC, so sayonara deshita xigmatex. diff mobo = diff bios settings = diff results

@fatalynx05

Try to RMA ur mobo 1st. If cannot rma . maybe can repair .
i got a fren who know how to repair mobo

could be, can't find one suitable mosfet cooler other than those sellin at sidewinder...


my advice is remove d silent otes, put ya own nb cooler & sinks those mosfets... if ur on x2 temp still ok, but if ur on quaddy, then temp will be alot more diff...

[attachmentid=574575]

This one ke? Someone should bulk this thing in garage sale,
Sure the temp go down And selling like hot cake

just got my x2 6000. now doing 3.3g wif my MATX biostar TA780G. aim to go 3.4g and put it into my HTPC casing.

p/s: i just migrated to the brighter side. lolz

yup, awesome item it is... too bad there aint high demand on this kinda item...

Welcome to bright side
So us what u got

becareful ..dont push to hard .
780G mobo is eazy to frying the mosfet

---

Added on August 29, 2008, 11:21 pm

look nice ...the colour like copper 1.
is really pure copper ..if no forget it

Dimensions (mm)
87(L) x 16(W) x 29.6(H)
Material
C1100 Forged Copper
Weight
69g
Thermal Adhesive
Fujipoly GR-d Thermal Tape
SUPPORTED Motherboards

ASUS
P5W64 WS Pro, P5N-T Deluxe, P5E3 Deluxe, P5E3, P5E3-D WiFi-AP, P5K Premium/WiFi-AP, P5K3 Premium/WiFi-AP, P5K3 Deluxe/WiFi-AP, P5K Deluxe/WiFi-AP, P5K-E/WIFI-AP, P5K WS, Commando, P5B Premium Vista Edition, P5B Deluxe, P5B Deluxe/WiFi-AP, Striker, P5N32-E SLI, Striker Extreme, M2N32-SLI Deluxe
Gigabyte
GA-965P-DQ6GA-965P-DS3P, GA-965P-DS4, GA-M59SLI-S5, GA-M57SLI-DS4, GA-M57SLI-S4, GA-MA790FX-DS5, GA-MA790FX-DQ6

how much for 1 piece ?? got link for it ??

http://www.sidewindercomputers.com/memandvidcar.html

How about u bulk this thing up

Don't have to buy...just cut from old heatsink la...socket A etc lol.

Hehehe ...long time edy i using this .......

soket A heatsink is very big laa......old gc heatsink (AGP) is better

DataBase Updated

if got high demand can la bulk it..

deleted*double post*

ladies and gentlemen,
TA790GX 128M finally in the house
after shipping delayed for 1 month, due to the olympic event

[attachmentid=575207]
[attachmentid=575208]

Review time

-pWs-

do they need to put huge lettering on the board . and passive hs summore

great, now i can learn something from u bro...

all i can say now is d board is really hard to tame...

currently my x2 6000+ is doing 3.36g wif 1.536v. temp under orthos around 57c. now trying to get to 3.4g. btw, is my vcore normal? my biostar TA780G MTAX only have +0.1v,+0.2v for vcore ...

How Much

Mosfets chipset didnt come with heatsink

yeah i think ppl in here wanna know how much and when???

then only review..

i think because they say bios not mature yet thats y very hard to tame...

@dblooi will tame it without sweat

BTW, Sunbeam Core Contact Freezer on AMD
http://forum.lowyat.net/topic/775842