team xtreem uses what chip?

May i know,is there any WC that as cheap as maybe RM 200,and able to cool 1.5V till 20C?Or even lower.Is there any?

I don't think so. Even if there's any, it won't be as good as high end air cooling. Lowest budget is RM 500

ah_khoo, c'mon just a lil bit more ah_khoo ! ah_khoo ! ah_khoo !

If thats so i better grab Peltier lo.The seller said,confirm if 1.57V can reach 20C.

now peltier came with socket eh?
how much the price now?

Came with socket meh?Where got,its just put below the CPU Cooler and top of Processor.Or in other names,between the CPU and Processor.
Its around RM 120.

load 20c or idle 20c?

Load 20C..The seller said.The seller said,if it doesnt reach 20C,he will full refund me within 1 months

if it work , i would probably buy it also.

Phase change OC. very tempting..

Ahaha..will get it..Maybe next month.Btw Can i use stability test other than Orthos or SuperPI32M like the Everest Stability Test?

no point goin for cheap wc, leceh + not so gud performance. i would rather go for true + high cfm 120mm fan.


thx bro, i shall not fail u then... gimme sometimes... hopefully by tomorrow there'll be positive result...

What's the wattage rating of that peltier?

130W..Quite high..You might want to use any other Cap Ayam PSU.

dang...those pelt make me

just asking.. so just same like last time..
i thought it's pre-fitted with after market coolers..
i'm thinking if it's really good why coolers manufacturer not bundle it..

btw.. it's between cpu n heatsink..
but i think the price not even drop?

i think not pre fitted la,it's like a electronic thing that cool the thermal molecule using electric i guess...ya,i think it's overprice since no other ppl sell it by now...

any good phenom lately?

Bro ah khoo in process
Btw guys,
which 1 more accurate?The CPU Temp OR the Core 1 and Core 2?

i dun think there is any active phenom users right now apart from bro ahkoo here (2.8!!).. maybe changing to diff board would help.. which leads to...

when are the sb750 coming to malaysia?? wanna see the review bro dblooi promised (and im bored already playing solitare and minesweeper on my gf's lappy).

and sunbeam contact freezer.. any amd users? hows the performance? they say better than red scorpion?

@AMDAthlon

May i know your ram setting
already archived 3.2GHz , but i want more
Vdimm voltage? i already put 2.0V

Whats your Processor Multiplier?
My settings for RAM now
DDR2 667,2.0VDIMM,4-4-4-12-16 2T.

12x267 , ram ddr667 , vdimm 2.0, 5-5-5-15-21 2T

---

Added on August 10, 2008, 12:16 am

My cpuid HW Monitor shows core1 and core2 only 20c (very cold- maybe can OC to 4GHz)
but cpu 4xC, I trust the cpu temp more.
Abit EQ show cpu temp 4X-5XC

Wrong temp reading for Core #1 and Core #2 . U using 4600 brisbane so da proc got TDP problem

So bro digswell,the most correct one is Core 1 and Core 2?

My latest OC Result


[attachmentid=553992]

All internal core temp reading is no correct. only the cpu temp is the most correct ..coz the sensor temp is local from mobo..but hv to depend from the mobo..some mobo got very close reading some not

for me my 5000+ brisbane i always use the mobo cpu temp + 3c = to real correct mobo

---

Added on August 10, 2008, 12:05 pm

From ur SS ..ur ram is plug at slot 3 and slot 4 . normally ram is plug near with cpu . Is ur ram slot 3 and 4 near with cpu or slot 1 and 2

guys...

between abit AX78 and asus M3A78-EM.....which one better..?

Ram slot 1 and 2 is near the cpu. The clearance is so small to put there beacause very near to the AC Frezer fan . Now Using Ocz reaper so the clearance is more critical because of it heatsink design.

Is the any deference in OC result if i put the ram in the slot 3&4 or 1&2 ?

dude, ur EPP show that u can run it on 4-4-4-15 on 2.0v..
why bother running at 5-5-5-15..??

btw there's nothing wrong running at slot 3 or 4...
but make sure the dual channel mode on ur mobo..
different mobo got different dual channel mode..

BTW..got friend wanna sale his crucial(double sided 1) together with TR ram cooler..
if anybody interested..do pm me..confirm 1200...

Try try only lo. Dont no about ram lo . but later try those setting.
what the different if running 5-5-5-15 compare to 4-4-4-15?

with tight timing u can get better performance ofcourse..

AFAIK...there is some dffrences between the slots... hard to explain, but the nearer the ram, the better u can oc.. thats what i get when i need 2.2v to oc my ram till ddr1180 which in slot 3&4, but only 2.1v to make it stable if its at slot 1&2..but still,. u need to try it on ur own

wah. finally a serious increase. congrats guy.
push higher.

btw. your item i send tomorrow.
anybody miss me?

yeah..i got the same result during my day before..
so it actually make a different yea??

Sorry,Noob here, i need recomendation for CPU cooler for my Procs..leave here brand and model with budget around 150..TQ

150 will get you a xigmatek s1283 at imbi. one of the best air cooled heatsink fan. pm rockrock from lowyat.net.
see below. tx2 is not bad and around 75 only. i used xigmatek before. if you lite oc go for tx2 but if you plan to get one of the best get xigmatek.

http://forum.lowyat.net/index.php?showtopic=640564&hl=

yeap... but still we have to try on our own first...

@dino
u can get cooler master tx2..or fork out some more money and get a red scorpion..

do you means HDT-S1283 or Red Scorpion-S1283

red scorpion fan color only difference. for 150 budget get s1283.

orait bro..thanks...i do my survey 1st

[attachmentid=554591]

http://valid.x86-secret.com/show_oc.php?id=401261

Ops...she is a girl, bro.



-pWs-

Top up rm20 and you"ll get the No1 Cpu Cooler in Frostytech.com
*Sunbeamtech Core-Contact Freezer CPU

http://forum.lowyat.net/topic/759632

@MENCHELSEA
DATABASE UPDATED
(SPi)

For main database, will update later.. sory for late

as promised, 2.7GHz for bro -pWs- & our up comin new phenom user...

[attachmentid=554690]


edited:

bro xixo, pls put my name into d db, thanks...

Phenom X4 9550 | ah_khoo | Abit AX78 | Twinmos DDR800 Value Ram | 982MHz | 5-5-5-15-21 | PC Cooler HP-1204

Wow 2.7ghz!!
Not planning to push for 2.8~3ghz??

Hmm yea lor.Btw bro xixo,i will enter SuperPI 1M first.I cant get Orthos and SuperPI32M stable..But gaming all okay even got games that stress 100%

the temp also looks ok.. is it load ah_khoo?

and 1 more thing i wonder why dimm 1 cannot set 75ns but others dimm can..

All bout the ram timing setting . u nid to play a bit on it to make it stable

Memset screen shoot pls

next is 2.8GHz, but i got a feelin that this is almost d max on my crappy board (still waitin for bro dblooi's review... ) ...


nope, load is < 50'c (48~49'c), but d pwm still d b!tch, onload it reaches ~70'c...

i'm on slot 3 & 4... d first 2 slot were set to auto...


w/o u d thread is so slooooow....

have u stocked up maggie from tesco yet?