So the right one Deneb to compare is,either the Yorkfield or the Mainstream of Nehalem series..Forgot what its called.I think Its either the Lynnfield or Havendale
Btw guys,2 days ago,i manage to surpass 3.6@BIOS
But when yesterday,i tried again using same settings,it cannot surpass 3.6 again..Why o?

are you sure your 13?
well. for most of us. what really matter i the value per maximum speed that we are getting.
ex. 500rm gets us a 3.4g quad compared to 800 to get 3.5g quad. that's my point of view.

by the way this would be my last post for few days. have to go back to real life now.
have a long trip ahead. bye boys.

if u plan to stay w/ amd, then u can grab a 9850 b.e. pair it w/ 790gx boards that equipped with sb750, i can safely say 3.2GHz is no sweat.

but if darkside is too hard to resist, by all mean grab those quaddies sell by bro kucingfight (not sure they're still available atm ). from there u can challenge bro -pWs- ledi since he's on q9300 as well...


@ bro -pWs-:
watch out bro... our new new girl on d block is someone that capable of challengin d greats like u... given sometimes ofcoz...


yup, w/ super high voltage, it's not meant for 24/7 setup. intel still leadin comfortably atm & near future...

I'm the one plan to stay with AMD..and maybe some of the rest member.
Yeah..But only time decides it.Cya imsmiko in Intel thread.
Im 13..Check tradelist who had COD with me and PM them
bro ah khoo..Is there any plans to move darkside you?
Regarding performance..i cant tell much because most of games i played smooth,eventhou imsmiko said she lagging while playing NFS,i dont have any prob with it..

Let challenge who folding faster.


-pWs-

i've been there twice, once intel p3 450MHz (my 1st pc) & e2140 + asus p5k-(sumthing, forgot ledi ) last year. well, where am i now?



wow... promotin until here ah bro?

i was in team almostthere once, but never contribute anything that's why kena expelled...

@ imsmiko:

have a safe journey mate, i'll go somewhere far oso later... for sumthing new...

phenom spec on the amd page is stated stock vcore at 1.15/1.2/1.25v
when i just got my mobo, it was running at 1.15v default. i think due to the months of bios updates,
now everyone calls 1.25v as phenom's stock volt.

somemore my mobo got...err izit vdroop?? so i can somehow actually run on 1.13v LOL..

bro ah_khoo, dun mind too much about nb multi. dropping nb multi might make you climb HTT easier,
in my own experience, phenoms dun enjoy low nb too.

maybe try pci set to 64 instead of 32???

edit:
i suspect imsmiko will come back real soon. nobody truly quits oc'ing. not for long... muahahaha

bro, i know that nb freq should always be higher than ht link. but in my case d ht link is hoverin @ 1.6~1.7k (IIRC) but d nb freq is @ 2.2k, which i think is abit too high.

rest assured i'll try my very best to achive higher clocks... 2.8GHz could be possible for sp 1m, i'm targettin 2.7GHz prime stable currently...


just get my new toy, sumthing big & windy...

i gotta ride on d tren for 1.5hrs (back & forth) just to get this stuff @ knock down price...

actually u r lucky enough to get low stock voltage.. the proc can OC better..
phenom can run @ 1.1v also..

Somehow i remember reading on xs that ax78 and tweak nb multi... just urs cannot?

Hehehe picture please for the heatsink in action.( i assume u buy hsf... )



I'm quite confident a 9500/9550 can run 2.4ghz at 1.1v... if given the option in the bios.

is this temperature normal?
im using Cm gemini 2

dun trust.. so many time i think our forumer told

yup' i'm aware of that, sumthing w/ table thingy... too advance for old brain of mine...

neway, i'll explore it if i have time...

no need peektures lah... read siggy will do...


brisby dts gives false readin.

33s? how's the ram.. if i'm not mistaken i can reach 28s @ 3ghz..

during super-pi test,i open several programs
but the smallest time i can get 31.777s

this my ram setting,i donno to how play with ram
i just increase the bus speed and ht link only

aiyo u rugi alot.. play with the HTT a little bit.. or even ram divider
ur ram capable of 400 n maybe more..

---

Added on August 7, 2008, 5:31 pmCR should 2T

ok,still learning

last time i change 1T to 2T

my mobo wont boot up

dun wory.. dun change setting.. push reset button then try to boot back.. dun clear cmos first.. n see how

ur processor got problem in reading temp, canot trust

aiyo, so unlucky la me..
cannot fix it right?
and if i want oc it more,how aa

what kind heatsink u use for it ??

coolermaster gemini 2
just bought it.

it'll be helpful if u put up ya system specification in ya siggy...

use ur hand to touch it, and feel it

i just see 3.44 Ghz Deneb X4...
not bad..2.8Ghz in stock Vcore

really can use this method?

hurm

abit ax78
amd x2 5000
huntkey 550watt
gecube 3850 512mb
WD 250Gb
Maxtor 250Gb

that all

of coz ma..
if u touch and u fell can tahan the temp..so it`s ok lor

where should i touch?
the proc @ cooler?i had touch the cooler,
suam2 jer

Touch the cooler..if suam suam means ok lo

touch the heatsink..if feel warm , so is ok
normally brisbane core proc temp reading for core#1 and #2 is no correct. but CPU core temp reading something can trust some no

Guys..any idea..i cant seems to get 3.5 stable..at 1.57VCore..
But the strange thing happends here..

285HTTX12 1.57V Fail to SuperPI
285HTTX12 1.52V Success to SuperPI..
Anyone know why?

Fail to stable@3.5@1.57V
290X12 HTT
1.57VCore
2.0VDIMM
4-4-4-12-16 2T
DDR2 533

Current Settings.Which is stable
3420Mhz
4-4-4-12-16 2T
DDR2 533
VDIMM 1.9
1.52VCore

Do note that I'm Using Windows Vista 64Bit.

so how to check the actual temp? im using HWmonitor. normally i add up core1+core2= cpu temp.

Overheat will coz fail SPI
maybe mosfets , ram or n/b

cpu temp is read by the mobo, while the core1 and core2 are read using dts, built inside the processor.

ermmm..external temp sensor reader.. cannot say core1+core2= cpu temp ,this is wrong

normally if cpu temp is 40c , core #1 is around 36 tp 39c and core # also 36 to 39c

Like Maybe thermal probe..etc
Btw bro digs,i need to cool out more my Proc,RAM,mosfets..etc?

from wat i thinking , maybe or maybe not....ax78 mobo a bit problem with mosfet ...the mosfet heatsink is no enuf to cool down the chipset

But there's already a fan to cool it.

maybe it is becoz the temp as bro digs says...

try check the temp using temp sensor or sumthing.. monitor the temp while OCing then u shud know the prob...
dun have one, i can lend one for u when im back in KL... if i remember where i put it...

that's d point (it's harder to be stable on 64-bit os if compared to 32-bit) besides ya super high voltage (which directly causing high temp).

to reach that clock for prime stable, u need extra coolin, mebe air cond. i wouldn't prime my chip w/ ~1.6v, that's abit insane if u ask me.


still not enuf i guess.

hey casperito..long time no see
@amdathlon...excessive voltage wont make ur oc stable...sometimes it will cause overheating...mosfet, n/b, etc2... correct me if im wrong.. sumtimes too, ur vdimm..coz the higher clock ur cpu, the more it will stress ur ram..try to put it to CL5 first, and see how it goes...screenshot will give us a thousand words to describe ur prob...provide them

Btw guys i think i'm getting Peltier..The seller says if my Idle 55C it can drops to 20C Idle if i use Peltier..
Good?
I guess i need to wait for my 150CFM Delta Fan..
Tomorrow i give you guys more info.
But if compare 64vs32,i feel 64Bit is much smoother and faster than 32Bit.

peltier meaning more power consumption... need another extra PSU to power it up or u can mod it to ur current PSU...
i think u shud go for water cooling rather than peltier... peltier seems kinda risky... but hey, it not bad to try...
150CFM aa?? surely ur fan can be heard whole of keramat... ekekeke...
64bit more faster?? really?? i think 64 bit consume more resources right??
got the dvd aa?? can i borrow?? ehehehe....

@alive88
ehehe... been busy lately... no more OC for me... PC gone kaput alreadi... went to extreme on it....

DVD ah...Download torrent lor.Me the Key my bro got it from his University
I dont think so,its about 55dBA only..

1.57 consider too high.. if u fail to boost the airflow , dun dream too push more.. try to turn to good cooling or move to WC..

p/s: [download ]

hehe.. dun care la as long can use... ehehe..
really?? 150cfm @ 55dBa... even sum people cannot tahan 37dBa++...
go for water la... no need bising2...

new progress thou just a 'lil...

[attachmentid=552580]

hopefully i can reach 2.7GHz so that we'll have another phenom user here...

yup. Keep up the good work.

I"ll start oc my brisby tommorow. Getting a new ram.
Pawn imsmiko..

thx mate, still tryin hard here...

what ram u'll be gettin? team xtreem black?

nop. ocz reaper