Full Version: Prob oc with my IntelQ6600
i'm used intel coreQuad Q6600,mobo Abit IP35-pro,GecubeHD3870,RAm2x2GB Crucial Ballistic Tracer,PSU silverstone 560watt..the prob is,when i oc the processor from 2.4 to 3.0,my pc is can't start the windows & my cpu fan stop 'working".my screen blank!!..is that my cpu need a power up??
dont forget to adjust ur ram multiplier
need to consider the below..
1. vcore/ vdimm
2. ram divider/ timming
3. temperature..
1. vcore/ vdimm
2. ram divider/ timming
3. temperature..
You may also consider to get a better CPU heatsink if your place is hot and you don't have an air conditioner. Environment heat also affects the overclocking.
Try 333x9,1:1 divider.Should be ok.
QUOTE(TristanX @ Jun 18 2008, 07:45 PM)
You may also consider to get a better CPU heatsink if your place is hot and you don't have an air conditioner. Environment heat also affects the overclocking.
i'm used Xigmatek HD-SD964 air cooler..and one more thing,my cpu fan stop running..
don't tell me you haven't clear CMOS and restart the OC adventure 
333x0 = 0GHz, phailed
QUOTE(OC4/3 @ Jun 18 2008, 07:49 PM)
Try 333x0,1:1 divider.Should be ok.
333x0 = 0GHz, phailed
QUOTE(ktek @ Jun 18 2008, 08:43 PM)
don't tell me you haven't clear CMOS and restart the OC adventure
333x0 = 0GHz, phailed
333x0 = 0GHz, phailed
i try again,again n again..but still not working..can u suggest me better setting???
QUOTE(ktek @ Jun 18 2008, 08:43 PM)
don't tell me you haven't clear CMOS and restart the OC adventure
333x0 = 0GHz, phailed
333x0 = 0GHz, phailed
i lol'd for typo error...
somebody help me please......how to oc step by step... 
QUOTE(idin84 @ Jun 18 2008, 09:32 PM)
somebody help me please......how to oc step by step...
u try find kmarc..theres oc guide in his siggy if he not remove yet
QUOTE(mfcm @ Jun 18 2008, 09:53 PM)
u try find kmarc..theres oc guide in his siggy if he not remove yet
This one right?
http://forum.lowyat.net/index.php?act=ST&f...0#entry15451675
QUOTE(Kaiser Wave @ Jun 18 2008, 10:43 PM)
thanx!!finally i find it!!
good insructn for newbie oc lor...i jus use tat no prob wif my oc...
Next time state your settings...
At least we can help more.
Like what kind of cooler, what is your normal vcore and what did you increase your vcore to.. and what is your vdimm and what you increased that too.. what are your ram timings? and what is the speed of the rams and proc that you increased.
With more info, more people will be able to help you.
I am using a Q6600 vcore 1.2375V. HyperX 4-4-4-12 800Mhz @ 2.03Vdimm.
I increased my vcore to 1.3875V and increase my Clock to 400X9 multis.
This was done on GA-P35C-DS3R rev2.0. It was stable playing games and all but when i Prime tested it, it always failed. So i increased my vcore to 1.4V and it was stable for prime for 2 hours. Didn't bother testing it whole night.
Sometimes with 4GB of ram, that means 1 gb X4 sticks, you might have to increase your Northbridge voltage by a lil. Northbridge is MCH in your BIOS.
Hope this helps. Also, please check your temperatures when you increase your voltages. Your Proc should not be more than 50 when its Idle and should not be more than 65 when its full load like 100% on all 4 cores. This can be done by programs like prime, everest, occt..
At least we can help more.
Like what kind of cooler, what is your normal vcore and what did you increase your vcore to.. and what is your vdimm and what you increased that too.. what are your ram timings? and what is the speed of the rams and proc that you increased.
With more info, more people will be able to help you.
I am using a Q6600 vcore 1.2375V. HyperX 4-4-4-12 800Mhz @ 2.03Vdimm.
I increased my vcore to 1.3875V and increase my Clock to 400X9 multis.
This was done on GA-P35C-DS3R rev2.0. It was stable playing games and all but when i Prime tested it, it always failed. So i increased my vcore to 1.4V and it was stable for prime for 2 hours. Didn't bother testing it whole night.
Sometimes with 4GB of ram, that means 1 gb X4 sticks, you might have to increase your Northbridge voltage by a lil. Northbridge is MCH in your BIOS.
Hope this helps. Also, please check your temperatures when you increase your voltages. Your Proc should not be more than 50 when its Idle and should not be more than 65 when its full load like 100% on all 4 cores. This can be done by programs like prime, everest, occt..
QUOTE(bernardryan @ Jun 19 2008, 06:26 PM)
Next time state your settings...
At least we can help more.
Like what kind of cooler, what is your normal vcore and what did you increase your vcore to.. and what is your vdimm and what you increased that too.. what are your ram timings? and what is the speed of the rams and proc that you increased.
With more info, more people will be able to help you.
I am using a Q6600 vcore 1.2375V. HyperX 4-4-4-12 800Mhz @ 2.03Vdimm.
I increased my vcore to 1.3875V and increase my Clock to 400X9 multis.
This was done on GA-P35C-DS3R rev2.0. It was stable playing games and all but when i Prime tested it, it always failed. So i increased my vcore to 1.4V and it was stable for prime for 2 hours. Didn't bother testing it whole night.
Sometimes with 4GB of ram, that means 1 gb X4 sticks, you might have to increase your Northbridge voltage by a lil. Northbridge is MCH in your BIOS.
Hope this helps. Also, please check your temperatures when you increase your voltages. Your Proc should not be more than 50 when its Idle and should not be more than 65 when its full load like 100% on all 4 cores. This can be done by programs like prime, everest, occt..
At least we can help more.
Like what kind of cooler, what is your normal vcore and what did you increase your vcore to.. and what is your vdimm and what you increased that too.. what are your ram timings? and what is the speed of the rams and proc that you increased.
With more info, more people will be able to help you.
I am using a Q6600 vcore 1.2375V. HyperX 4-4-4-12 800Mhz @ 2.03Vdimm.
I increased my vcore to 1.3875V and increase my Clock to 400X9 multis.
This was done on GA-P35C-DS3R rev2.0. It was stable playing games and all but when i Prime tested it, it always failed. So i increased my vcore to 1.4V and it was stable for prime for 2 hours. Didn't bother testing it whole night.
Sometimes with 4GB of ram, that means 1 gb X4 sticks, you might have to increase your Northbridge voltage by a lil. Northbridge is MCH in your BIOS.
Hope this helps. Also, please check your temperatures when you increase your voltages. Your Proc should not be more than 50 when its Idle and should not be more than 65 when its full load like 100% on all 4 cores. This can be done by programs like prime, everest, occt..
i have an question,i set my ram timing to 4-4-4-12,but cant star..i'm use cruicial ballastic tracer 2x2gb 800mhz..is it power ddr voltage not enough??
why not read the pinned thread or do a search? why must open a new thread everytime when it's just a basic question?
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.