OCZ Technology Background









INTRODUCTION

The Vendetta 2 is an efficient new CPU cooler with a powerful 120mm fan design for maximum performance. Utilizing a distinctive stacked fin design and trend-setting heat pipe direct touch (HDT) design combined with a large low-noise fan, the Vendetta 2 is built to quietly solve the cooling challenges of today?s most powerful processors.

Utilizing the proven performance of the latest HTD design, the Vendetta 2 has direct contact with the processor using three copper heat pipes to ensure the most rapid heat transfer and a lighter weight. The dimple micro-configuration of the stacked aluminum fins adds turbulence, reducing the skin effect of laminar air flow for more efficient circulation within your case. The versatile and user-friendly Vendetta 2 is compatible with AMD AM2/939/754/755 and Intel 775 sockets and can be installed quickly and easily by end-users at all skill levels.

The Vendetta 2 offers an extra performance boost than the more compact original version. The ultra-quiet 120mm fan, with its anti-vibration rubber connectors to reduce excess noise, sets new standards for extremely efficient cooling performance at a price point that is still enticing to a variety of budgets. (OCZ Official Website, 2008)


SPECIFICATIONS

- For Sockets AMD 754/755/939/AM2, Intel LGA775
- 3 Pure Copper heat pipes for superior heat dissipation
- Pure Aluminum fins for ultimate durability
- Heatsink Dimensions:(W)120 x (D)50 x (H)159mm

FAN SPECIFICATIONS

- Fan Dimensions: (L)120 x (W) 120 x (H)25mm
- Rated Voltage: 12V DC
- Fan Speed: 800-1500 RPM
- Fan Air Flow: 65-81 CFM
- Noise Level: 20-32 dBA
- Bearing type: Rifle
- Connector: 4 pin with PWM
- Includes: 120mm Fan with rubber connectors
- Mounting Hardware for all above CPUs

Thanks to irenic for the cooler although arrived quite late.

First Impression



The package containing OCZ Vendetta 2



The cooler



A more detailed look





The top view of the cooler



The heatpipes

The rest of the package


Installation

Installing the OCZ Vendetta 2 on a Socket 775 motherboard is not that difficult as it use the push pins to attach the cooler to the motherboard. The only part that would take some time would be to attach the anti-vibration rubber fastener to the fan and to attach the fan to the cooler. Other than that, the installation was pretty easy.

OCZ provide it's own thermal grease but to my disappointment, they didn't include the OCZ freeze with it. It should be great to have those bundled in together.





The cooler sits firmly on the motherboard inside the casing.

Test setup & Procedures

Motherboard - Gigabyte GA-P35C-DS3R Rev 1.1 F8 BIOS
CPU Default - Intel Core 2 Duo E6750 @ 2.66Ghz (G0 stepping)
Ram - Kingston Value RAM DDR2 667Mhz 4GB Kit
Video Card - Geforce 8800GTS G80
Hard Drive - Seagate Barracuda 7200.10 320GB (16MB Cache)
Cooling - OCZ Vendetta 2, and Thermaltake MaxOrb CPU Cooler
PSU - Silverstone Strider ST56F 560Watts Rev 3.0
Casing - Cooler Master Centurion 5 with Silverstone FM123 exhaust.
OS - Windows XP SP2

1. The temperature will be monitor using Core Temp at idle and at full load
2. Load test were run using OCCT for 30 minutes.
3. Tuniq TX-2 thermal paste will be used for all the test.

Results



Thermaltake MaxOrb



OCZ Vendetta 2

Verdict

The OCZ Vendetta 2 proves to be a decent air cooler in the market. The results obtain was pretty good although I'm expecting the load temperature to be below 70C. On idle for both stock and overclocked state, it seems to be cooler than the MaxOrb and shows its superiority over the latter. When the E6750 is overclocked at 3.6Ghz with 1.472 VCore, the Vendetta 2 proves to be a clear cut winner over the MaxOrb. But from my personal view, the results was far from impressive as it was not being able to prove a really huge drop on the temperature on full load. Looking at the design of the Vendetta 2, the result should be more significant. The result that was obtain here does not justify the Vendetta 2 as the king of air cooling. All in all, the Vendetta 2 would be a decent cooler and should be able to cool off the temperature of your overclocked processor.

Strengths

1. The cooling performance was better on load than the MaxOrb.
2. Light weight.
3. Silent fan operation.
4. HDT design.
5. Worth the price.

Weaknesses

1. Uneven base surface.
2. No OCZ Freeze included.
3. Anti-vibration rubber installation ain't that easy.

woah looks like everyone is following my format for reviews now

Follow the Sifu. You'll never go wrong

And Attractive plus interesting to read if format like this..

skymyxe, nice review bro.
btw, it look really alike with the xigmatek s1283. even the stock thermal paste look alike with the one xigmatek provide.

Tnx, mate. I was hoping getting a better thermal paste though. Something like what Zalman provides with their cooler. OCZ Freeze should be a great bundle. Unlikely they didn't put it in. Otherwise could do a review based on that thermal paste too.

DONT MAKE THE SAME MISTAKE!!!!!

huhuhuh



my xigmatek was lapped by the previous owner...

wowweee...

Dang, the outcome of such lapping job just

Wouldn't hope to get something from that. Could the copper be that fragile until it cracked?

after 2 phase of lapping..its thin already..no wonder it became so fragile...

i think OCZ purposely make it not even for the surface just like the bowed apogee gt or slightly bow design of d-tek fuzion block... more contact with intel socket 775 proc which have a concave IHS... i think even thermalright heatsink nowadays also got the bowed bottom surface... mayb provide better pressure + contact onto the CPU IHS, especially the lga775 proc...

holy cow. that pic scare me bro. luckily that day i lap my hsf, that didnt happen. btw, he start off with 400 grit which i think its too coarse for a direct heat pipe kind of hsf.

i can lent u my red scorpion if u like to compare it with ur OCZ~~

i think no point comparing coz its the same thing imo. maybe the spec of the fan may be different but other that than, it seems quite similar to the RS.

Yup, it almost the same with the Vendetta having a lil' bit more surface area for heat dissipation. I'd love to add the comparison between the Vendetta 2 and the Red Scorpion. We'll see how it goes, if not later sup3rfly might do the comparison.

woah i was expecting performance similar to ultra 120x.. quite hot there @ 3.6ghz and high vcore... my e6600 b2 stepping running at 3.6ghz @ 1.41vcore... idles at 40C load at 58C with my IFX-14...

Not an impressive result I must say when I test the Vendetta 2. But the result would be slightly the same using Red Scorpion or Xigmatek Vanilla I think. I'd like to test it outside the casing later if have the time.

From Frosty Tech OCZ Vendetta 2 Review



Top Intel HSF From Frosty Tech

I must say i wasn't a surprise result by Frosty Tech as my review does not justify the Vendetta 2 as the King of Air Cooler too.

Quite a disappointed result from both skymyxe and Frosty Tech for the Vendetta 2. I tot it could beat Xigmatek but maybe the V2 couldn't just do that. With a higher CFM fan maybe.

afaik higher CFM doesnt contribute much. but it quite surprise me either. anyways, skymyxe bro could do another test using higher cfm fan on the V2.

btw, not all review are accurate as they may tend to be bias.

i have this cooler and the performance is great.
my Q6600 now is 3.6Ghz, temp on load is 60c max. but i use a delta high cfm fan hehe

great review u got there...

yeah as i said last time i also dunno why on earth the base is not flat...

btw, if u dun have enuf time then u can just accept my test.. i already compared this with xigmatek s1284 .. and yes this ocz is better by 2-3c the most..

So as far as all the test goes I think the V2 is still a great cooler indeed. No doubt bout that rite.

Haven't tried Xig, but from what I can say, the results between V2 and Xig would not vary much. Higher CFM fan does not boost a significant amount of improvement but it does brings down the temperature by a mere 3-4 degrees.

Did you guys checked benchmark reviews? OCZ V2 is top there...... Which is more trustable ah???? Damn.........

I think OCZ V2 top in many reviews. That would justify Frosty Tech's results so far.

i haz this also... but then i cant check the temp due to my penryn's DTS i think its stuck at 58°c...

but im running a E8200 @ 3.20... but i forgot about the vcore

Can't check using CPU-Z for the VCore. Try using Everest Ultimate instead.

my temperature after installing ocz vendetta 2 =.=!!

http://img80.imageshack.us/img80/5973/44czf9.jpg

How's the temperature during stress test?

sad to say... 68-70C.. i start to feel that my CPU got thermal sensor prob. =.=!!

OCZ Vendetta design same like CM hyper 212..which better??
can put 1 more fan??

how can u take hyper 212 compare to vedentta II?haha..

its a little warm

by the way, what is the ambient temp of your room at that time?

that way, we can calculate the Δ temp over ambient

this is my cooler.i satisfied with d performance.i can push my e4500 to 3.192ghz(399x8).

Anyone know can it fit vertical in maximum II formula motherboard ?

hmm xchoit where ur get that gadget